Génie Électrique Jobs

I am looking for a freelancer who can simulate a flywheel energy storage system with a power rating using MATLAB/Simulink or PSCAD software . The simulation results should be detailed, providing technical specifications and analysis. Skills and experience required for this project include: - Proficiency in MATLAB/Simulink or PSCAD - Experience in simulating flywheel energy storage systems - Knowledge of power systems and energy storage - Ability to analyze and interpret simulation results - Attention to detail in providing technical specifications The freelancer should be able to accurately model the flywheel energy storage system and generate simulation results that meet the specified power rating and level of detail.

I am in need of a power supply expert to assist me with a project. The specific expertise I need is Power Supply Design, and I already have a schematic prepared for the project. I am looking for an engineer who is available to work on this project remotely and support me for a solution to fix the identified problem. Attached documents: 1. Schematic PSU with SMR20.8/10111 2. Datasheet SMR20.8/10111 3. Schematic2 to be used with connected ESP32-S3 and Display 4. Oscillograph records referred to schematic2 (Channel1: VCC_IN, Channel 2: +3.3V, Channel 3: VCC) 5. I5 conducted radio frequency report The product (room controller) has failed the requirements for the CE certification especially in "I5 conducted radio frequency". The expert should have good knowledge in power supply desi...

I need electrical design of the 2 story house. so I am looking for an experienced designer who has experience in electrical and lighting design. Please feel free to place a bid if you are right person.

Project Title: Mechanical Automation Design I am looking for a freelancer to design to Pick bottel(metatic can) from one Conveyor System and put it on another conveyor for my automation project. Specific requirements: - The system should be able to handle a production output of less than 100 units per hour. - I have general specifications for the components that need to be included in the assembly line. - The freelancer should have experience in designing and implementing conveyor systems. - Knowledge of mechanical engineering and automation principles is required. - Familiarity with industry standards and safety regulations is a plus. Skills and experience required: - Mechanical engineering - Automation system design - Conveyor system design and implementation - Knowledge of indust...

I am looking for a freelancer who can design and build a Buck-Boost Converter for a power supply application. The converter should have the following specifications: * Input Voltage : 16-32 V DC * Output Voltage : 28V DC; 5 Amp with dimming facility from 10V to 28V using 10K pot. Skills and Experience: - Experience in designing and building Buck-Boost Converters - Knowledge of power supply systems and voltage regulation - Familiarity with power electronics and circuit design - Ability to select and integrate suitable components for the converter - Proficiency in simulation and analysis tools for converter performance evaluation The ideal freelancer should have a strong background in electrical engineering and power electronics. They should be able to provide a detailed design and schema...

I am looking for an HVAC specialist to design a mini server room cooling system and a heat exchange system in the same building. The project requires the following: Size of the server room: Medium (100-500 square feet) Preferred method for cooling the server room: Liquid Cooling Estimated budget for the project: Less than $1000 Skills and experience needed for this project: - Experience in designing HVAC systems for server rooms - Knowledge of liquid cooling systems and their implementation - Ability to optimize cooling efficiency while staying within a budget - Familiarity with heat exchange systems - Strong problem-solving skills and attention to detail If you have the expertise and skills required for this project, please submit your proposal. More detailed explanation: We are look...

I am looking for a software-hardware engineer who can assist me with a project that requires expertise in both software development and hardware design. Skills and Experience: - Strong knowledge and experience in software development, including proficiency in programming languages such as C++, Python, and Java. - Expertise in hardware design, including circuit design, PCB layout, and component selection. - Familiarity with embedded systems and microcontrollers. - Ability to troubleshoot and debug software and hardware issues. - Strong problem-solving skills and attention to detail. Project Details: - The project can be completed remotely, so the ideal candidate should have experience working remotely and be able to effectively communicate and collaborate online. - The desired timeline f...

Project Title: Help with OpenPNP and OpenPlacer with Smoothie Board Controller I am looking for someone to help with configuring the Smoothie Board Controller and some help with OpenPNP for my pick and place. Skills and Experience Required: - Experience in configuring Smoothie Board Controller - Familiarity with OpenPNP and OpenPlacer - Knowledge of similar technologies Timeframe: - The task needs to be completed within a week. I have an open placer (Kale CNC) pick and place mini machine where the original controller board had a fault and would not switch all actuators. I have installed a smoothie board V1 instead and now have all the actuators working, I don't have any motion on any of the stepper motors. I believe it is an issue with the file or my files, I need someone to l...

Must be a Texas electrical engineer: Require electrical engineer who can verify an electrical code: 690.26 for pool bonding. Will pay for this service to clarify the code. It allows three various install methods of bond wire. We need a document that clearly states the code. We used "(a) Structural Reinforcing Steel. Structural reinforcing steel shall be bonded in accordance with 680.26(B)(1)(a). (b) Copper Ring. Where structural reinforcing steel is not available or is encapsulated in a nonconductive compound, a copper conductor(s) shall be utilized where the following requirements are met: (1) At least one minimum 8 AWG bare solid copper conductor shall be provided." We are looking for an electrical engineer who can confirm this if we supply all necessary photograp...

I am in need of an industrial design for a product to be used commercially. I have detailed specifications for the design, and I am looking for an experienced professional to carry it out. The product is from the electronics industry and needs to be designed with customer satisfaction in mind. I am looking for someone with creativity and an understanding of both product design and the electronics industry. If you believe you possess the necessary skill set and know-how, please submit your proposal for the project.

Project Title: Electrikal Description: I am looking for an experienced electrician for a project involving electrical repair and maintenance. The project timeline is flexible and there are no specific electrical requirements or standards to be followed. Skills and Experience: - Proven experience in electrical repair and maintenance - Knowledge of standard electrical practices - Familiarity with various electrical systems and equipment - Strong troubleshooting and problem-solving skills - Attention to detail and ability to work independently Please provide examples of previous projects and certifications related to electrical repair and maintenance.

PCB Design for safety Application, - Complexity Level: Moderate level, - details will be provided, Experienced PCB designer is required to develop a circuit board for an safety application. The design should be of moderate complexity and capable of meeting the specific requirements of our project. Skills and Experience Required: - Proficiency in PCB design software, such as Altium Designer or Eagle - Strong understanding of industrial application requirements - Experience working with complex circuitry and components - Knowledge of best practices for PCB layout and signal integrity - Ability to collaborate with the client to incorporate specific components into the design If you have a proven track record in PCB design for industrial applications and are able to work closely with our ...

I am looking for a freelancer who can replace a panel mounted 3.5mm headphone jack on an electronics box located in a meditation pod at a business. The specific issue with the audio jack is that it has come loose and is producing static noise. Additionally, one channel has no audio. You might need to enlarge the hole in the box so you will need a drill, you might also need hot glue or other materials to fix the jack in place so it doesn't move around. You will have to go to the site and work on the box and communicate with me over the phone / video call while you are onsite.

we look for a hardware specialized mate with good expertise on developing high preceise positioning detection via ESP32 or similar. Goal is to use as much as possible details to identify the position of the device. Ideally a few cm of positioning accurancy. Required skills: - knowledge how to identify high precise position via as much as possible different satelite systems - knowledge how to identify fastly the current position via GSM/LTE positioning - very high knowledge on RTK, AGPS, DGPS, RTCM 3 - very high knowledge on ESP prototyping The current idea is to use ESP8266/ESP32 based devices, along with central managed solutions. generic goal: - identify the current device position as accurate as possible, preferable a few cm - provide well documented code - send position details ...

I am looking for an experienced electrical design engineer to assist with the design and engineering of an EV (Electrical Vehicle) for the transportation of goods. The specific tasks include circuit design, power distribution, power system, control and protection, and vehicle lighting design. - The project requires expertise in electrical engineering and design principles. - Knowledge of EV systems and components is essential. - The ideal candidate should have experience in designing and engineering EVs or similar electrical vehicles. - The electrical design needs to be completed within 1 month. - The client has specific requirements and preferences for the design, which will be provided upon hiring. If you have the necessary skills and experience in electrical design for EVs, please su...

I am looking for a Professional Engineer (PE) who can review and provide a stamp for my physical security drawings for permit application in Washington DC. Drawings: - I have already completed the drawings and they are ready for review. Key Focus: - None Ideal Skills and Experience: - Professional Engineer (PE) certification in Washington DC - Physical security drawings review

Veuillez vous inscrire ou vous connecter pour voir les détails.

Hello, I’m looking for a Backend Office Assistant to join our team! We have a variety of tasks that need to be taken care of in order for our operations to run smoothly. Specifically, we need help with data entry, email management, and calendar management. Knowledge of Using MS Office Microsoft - Specially Excel World Etc. Make Spread Sheets on Google Sheets Etc. Able to Understand Reply Emails Etc. Have Very Very Good English & Communication Skills inorder to interact with the Customers In Australia. Should Know Basics of electrical Calculations whats Power Watts Voltage Amperes Etc. In addition, we require assistance with specific software or tools as well. We utilize Solar Design Tools to Design Solar Proposals a software program specifically designed for the Solar Sales bu...

I am looking for a freelancer to help me with a project development on the STM8S003F3 microcontroller. The project involves the following requirements: Specific Features and Functionalities: - Basic input/output operations - Communication protocols such as UART and SPI -Need to interface with MFRC522 AND STM8S003 IN COSMIC C COMPILER -need to read card ID and authenticate with speci -need a value to be decremented on rccard stored in a specific address sat @0x05H in rccard Existing Code and Hardware: - The project requires compatibility with existing hardware Preferred Programming Language: - The project should be developed using the C programming language Ideal Skills and Experience: - Proficiency in programming microcontrollers, specifically STM8S003F3 AND COSMIC C - Experience with ...

Necesitamos programar 10 temporizadores sincronizados, 4 sensores de nivel de agua dos de arranque y dos de pare. Por ultimo necesitamos programar dos sensores modbus rtu para para el arranque de otra bomba de pulverización y 3 ventiladores. todo modificable desde un panel HMI. plc Siemnes S7-1200 y HMI KTP1200

PCB Designer for Commercial Product Skills and Experience: - Proficient in PCB design software (e.g. Altium Designer, Eagle) - Strong knowledge of PCB layout and schematic design - Experience in designing PCBs for commercial products - Familiarity with industry standards and regulations for PCB design Requirements: - Design a single-sided PCB for a commercial product - Ability to suggest and select appropriate components for the design - Optimize the PCB layout for efficient manufacturing and assembly - Ensure the design meets industry standards and regulations - Strong attention to detail and ability to troubleshoot and resolve any design issues Deliverables: - Complete PCB design files (schematic, layout, Gerber files) - Bill of materials (BOM) with recommended components - Documentat...

My project requires a professional PCB layout designer to help bring my electronic device to life. The desired PCB should be a single layer, based on a sketch that I will provide. The functionality of the device is audio storing and connecting to a touch sheet. I need this PCB layout design to ensure proper function and to integrate the data transmission necessary to make the device work. I am confident that the right designer can take my project to the next level and make it exceptional.

I am looking for an experienced PCB programmer and designer who can create a custom PCB to a specific design. The design must be able to handle a critical power supply with signal amplification and data processing requirements. I have a specific design in mind and will provide full details to the accepted freelancer. Experience in C++, Python, or JavaScript languages is preferred, but not essential. The selected freelancer must understand the project requirements and be able to develop an efficient, reliable PCB within a reasonable timeframe.

I am looking for a PCB designer and Arduino programmer to help with my project. PCB Design: - The design will be a single layer PCB. Arduino Programming: - The purpose of the Arduino programming is to create an automated system. Component Integration: - I do not have specific components that need to be integrated into the design. - I am open to suggestions for components that would work best for my project. Ideal Skills and Experience: - Experience in PCB design, specifically with single layer designs. - Proficiency in Arduino programming for automated systems. - Knowledge of different components and the ability to suggest the best ones for the project. I want to make a similar project as given below in link. But i want to connect it to my system using wifi card If you have the sk...

I am seeking an EMI EMC Consultant who specializes in EMI/RFI Shielding for a project-based consultation. The ideal candidate should have experience in troubleshooting stage projects. Requirements: - Expertise in EMI/RFI Shielding - Experience in troubleshooting stage projects - Strong knowledge of electromagnetic compatibility and electromagnetic interference - Ability to identify and resolve issues related to EMI/RFI shielding - Excellent problem-solving skills - Familiarity with industry standards and regulations for EMI/EMC - Strong communication skills to effectively communicate findings and recommendations to the project team.

I'm looking for a freelancer experienced in Siemens Logo PLCs to help me reprogrammine my device. My current Logo PLC has basic functionality, but I am looking for someone to help me fix existing issues and make the necessary changes. While I have a rough idea of what the reprogramming should involve, I need reliant assistance to ensure the job is done correctly. If you have experience with Siemens Logo PLCs and are confident in your abilities, please reach out to me so that I may discuss the project further.

I am in need of experienced contractor service engineer to provide ongoing maintenance and repair services for medical anesthetic equipment and machinery. As all of my projects are highly important, I am looking for a dependable individual/team who can provide quality work and hit deadlines. I need someone with strong technical knowledge and expertise in electrical engineering to come up with solutions that are both cost-effective and reliable. If you think you have the necessary skills and expertise, please get in touch and let me know. Thank you!

I am looking for a fixed car wash system for my medium-sized facility. I have chosen the semi touchless system option as it is the safest for my customers' vehicles. Furthermore, I would like to include a drying system for added convenience. I understand the importance of providing a reliable car wash system for my customers and I'm hoping to find a freelancer who can help me achieve this goal. We need only the experienced freelancer in make and design fixed car wash machine system who already done the same projects and long experience in the same filed Please if you didn't do same project don't contact me to save my time and yours also

I am looking for a freelancer to help me with a BrightSign programming project. I need the freelancer to be able to display an image and send on/off commands to a Planar UR9851 Touch (morning on, evening off) using IR port. I have the IR codes. I already have the XT243 necessary to complete the project, and I need it done within 2 week's time. If you have experience in BrightSign programming then I look forward to you supplying me with a solution that meets my timeline.

I'm looking for someone to complete a commercial electrical drawing, 1 page, and have it professionally stamped by an engineer licensed to do work in the United States. The project relocates Panel L3 as a sub panel to L2 in circuit spaces 37/39/41 with 100amp breaker. Project requires Drawing E1.2 to be revised. IBC2018 Original city approved stamped drawing attached. Also attached is EIT schematic diagram detailing the change.

I am looking for a freelancer to install sensors in a commercial property. The number of sensors that need to be installed is more than 20. The task requires the freelancer to be experienced in sensor installation and should have the necessary equipment to get the job done. The project will need to be completed in a timely fashion and the freelancer should be ready to sign a non-disclosure agreement if requested.

I am looking for a skilled freelancer who can develop a 6-page HMI for my project using Siemens WinCC. The purpose of the HMI is to simulate the operation of a three-phase oil separator. Specific features that I need on the HMI include data logging and trending. This will allow me to track and analyze real-time data from the oil separator. The ideal freelancer for this job should have experience in PLC programming, specifically with TIA V18. They should also be proficient in HMI development using Siemens WinCC. If you have the necessary skills and experience, please submit your proposal.

I am looking for an expert who can help me calculate the cooling body for thermal management in my LED lamp. The LED-PCBs need to be cooled and i want to know the thickness of the cooling body. The LED lamp has 4 PCBs with 80LEDs each. You can take this datasheet for the LEDs The PCBs are in a housing (the lamp head), see pictures. Contact me if you have any questions. The pictures should explain all. - Experience in thermal management for electronic devices - Knowledge of different materials and their properties for cooling bodies - Ability to provide recommendations based on calculations and analysis

I am looking for a freelancer who can develop a 12V@2amp lead acid battery charger. Input Voltage: The charger should have a universal AC input voltage. Charging Technology: I am open to different charging technologies, including conventional, pulse, and trickle. Charging Time: The desired charging time for the battery is standard, which is between 4-8 hours. Ideal Skills and Experience: - Experience in designing and developing lead acid battery chargers - Knowledge of different charging technologies and their applications - Proficiency in working with universal AC input voltage - Familiarity with battery charging time optimization - Ability to deliver a high-quality and efficient charging solution within the given time frame.

I am looking for a skilled PCB designer to create a large-sized PCB (greater than 10cm x 10cm) for an ESP32 project. Key Requirements: - Experience in designing large-sized PCBs - Proficiency in Altium Designer, as it is the preferred PCB layout software - Ability to suggest and incorporate specific components into the design Tasks: - Create a PCB layout that accommodates the ESP32 SoC not the module. - The PCB should contain an accelerometer and gyroscope module. - Power to the board will be feed from an RJ45 PoE cable. The same cable will be used for modbus tcp so all additional hardware for that will need to be implemented. - The board will need to be programed using the Arduino IDE and other specific components - Provide suggestions for some components that are not yet specified -...

I am looking for someone to design a small, simple PCB for me with a deadline of 1-2 weeks. I understand that this is quite a short timeframe however I'm confident that the right individual with the right skill set can do it. I'm looking for someone who has the experience and expertise to produce a quality product and meet the desired timeline. If you think you can meet my requirements, then I would love to hear from you!

Talented Alt Text Writers for Engineering Books I am in need of skilled alt text writers who specialize in engineering books. The project involves creating alt text for both textbooks and professional engineering books, specifically in the field of electrical engineering. Requirements: - Expertise in electrical engineering and familiarity with the subject matter - Proficient in writing alt text for images and diagrams related to electrical engineering concepts - Ability to accurately convey technical information in a concise and accessible manner - Attention to detail to ensure proper formatting and adherence to alt text guidelines - Experience in creating alt text for more than 10 images per book Ideal Skills and Experience: - Strong background in electrical engineering or related fie...

we look for a hardware specialized mate with good expertise on developing a ESP32 (or similar) breadboard design for a mobile GPS location detection. Goal is to use as much as possible details to identify the position of the device. Ideally a few cm of positioning accuracy. Required skills: - knowledge how to identify high precise position via as much as possible different satellite systems - knowledge how to identify fast the current position via GSM/LTE positioning - very high knowledge on RTK, AGPS, DGPS, RTCM 3 - very high knowledge on ESP prototyping The current idea is to use ESP8266/ESP32 based devices, along with central managed solutions. generic goal: - identify the current device position as accurate as possible, preferable a few cm - provide well documented code - send p...

Our team is in need of someone with great knowledge and experience with Exor PLC+HMI to assist us with our embedded device. We are currently facing an issue with our custom written image and are seeking a solution. Requirements: - Extensive knowledge and experience with Exor PLC+HMI - Strong troubleshooting skills - Ability to identify and resolve issues with custom written images This project requires a dedicated individual who can quickly identify and resolve the issue with our custom written image.

So Design two stages of turbines. 1 for rotating the compressor (set of 2 turbine blades) 1 for rotating the external blades / cast. (set of 2 turbine baldes that rotate in opposite directions.)

I am looking for skilled PCB designers who have experience in multi-layer PCB design using Altium Designer. The project involves designing a PCB for data communication purposes. The ideal candidate should have a strong understanding of data communication protocols and be proficient in using Altium Designer for multi-layer PCB designs.

I am looking for a freelancer to help me with a project for starting a new enterprise. The project involves using an STM32 MCU to control 2 stepper motors and have them follow a complex contour. Skills and experience required: - Proficiency in programming STM32 MCUs - Strong understanding of stepper motor control - Experience with complex contour following algorithms - Ability to work under tight deadlines and deliver results - Any experience with use of the STM CORDIC co processor may be very helpful here. If you have the required skills and can complete the project then I look forward to the possibility of working with you. Best regards Luigi

We are an international company in the development and distribution of ADAS and control systems for vehicle and industrial applications. We are looking for an experienced engineers for the development of wiring harnesses for automotive applications, that adhere to SAE standards, meet OEM standards of design quality, electrical engineering and vehicle communications system. We need someone who is reliable, communicative, and capable of understanding and working to cross functional teams. If you feel confident you have the qualifications and experience in the automotive industry, please contact us. The preferred candidate should be based in Australia, preferable in NSW. - We look forward to hearing from you!

Seeking an expert in fluid dynamics and measurement for a challenging engineering project. We need an analysis of an orifice flow meter, uncertainty calculations, Monte Carlo simulation, and cavitation considerations. More information will be provided in DMs.

I'm looking for an experienced technician to help with troubleshooting an industrial machinery with an electrical issue. I'm not sure of the specific problem, however the Machine is not functioning properly. I would prefer the freelancer to visit my location for an on-site troubleshooting and repair. The most important factor is that the issues needs to be fixed as quickly and efficiently as possible. Please let me know if you are available and can help.

I am looking for a freelancer to create a project that will interface the AVR4DD32 microcontroller with an AEAT9922 magnetic encoder. The interface I require is SPI to configure the encoder, and assistance with coding the AVR4DD32 would be greatly appreciated. I would like the project to come with a detailed step-by-step guide so I'm able to understand the process and quickly implement a successful implementation of the interface. I am open to any suggestions or feedback that may be offered throughout the project.

I am looking for a surveillance system that includes CCTV cameras, and I need installation services as well. The intended location for the system is a residential space. The ideal provider should have extensive experience with the design and installation of this type of system in residential spaces. They should be able to provide all of the necessary components, such as cameras, monitors, recording devices, infrared lighting, computer interfaces, and software packages. I expect expertise and quality work that stands the test of time and can be customized to meet my specific needs. I also require professional installation services for the system. When it comes to quality and reliability, I do not make compromises. The surveillance system I am looking for must be reliable, secure, unobtr...

the program to be implemented is the following: using the HMI you set a sequence of times for each solenoid valve and an electrical conductivity value, choosing which tank to take the fertilizer from. When starting the sequence using the PID of the inverter we should automatically correct the conductivity value. Sector Time minute Ec mS Tank 1 30 3,2 1 2 25 3 1 5 29 2,8 3 7 43 4 2 3 12 1,2 1 6 20 1,1 4 4 15 2 2 8 10 3 4 programming example these parameters must be entered from the Magelis HMI and it is possible to control them from a mobile phone. another parameter that we must measure is the network pressure

The person should know about Surface Plasmon polarition and coupling of light. The person should have a PhD or at least an Mtech in a similar domain like Fields and Optics or Photonics.

La idea principal de este proyecto , es monitorear el voltaje, corriente y potencia de un motor de 12V utilizando el modulo PZEM 017. Este desarrollo lo requiero en Micropython.