Programming a microcontrolleremplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Compétences
Langues
    État du travail
    3,848 programming a microcontroller travaux trouvés au tarif de EUR

    Bonjour, Vous indiquez des compétences en électronique, microcontroller et C. Je souhaiterai échanger avec vous sur un projet de device connecté via un module BLE. Etes-vous basé à Paris ? Bien à vous, Ylann

    €35 / hr (Avg Bid)
    €35 / hr Offre moyenne
    1 offres

    ...Ultrasound Sensor, 1 Arduino board, and a battery that will measure liquid flow. Arduino board will receive two inputs (battery, ultrasound) and send two ouputs (LCD, Solenoid). All components will be provided. You will be designing those circuits and selecting a board that is electrically compatible and creating a schematic Coding for reading Ultrasound

    €1148 (Avg Bid)
    Local
    €1148 Offre moyenne
    1 offres
    Firmware module development 6 jours left
    VERIFIÉ

    We are a small company that works with weather monitoring, we have a whole hardware development team, but we want to outsource some specific jobs like this one: Develop a driver for the sensor BMP280 in Zephyr RTOS for an ARM microcontroller from the family nRF52

    €109 (Avg Bid)
    €109 Offre moyenne
    5 offres

    PIC32MX250F128B micro controller interacting with 430Boost CC110L radio module, Sending msg from one TX station and receive at RX station without data loss using microcontroller and radio module mention above. Also want to see output on USB to serial

    €386 (Avg Bid)
    €386 Offre moyenne
    5 offres

    Development of a mecha-tronic product (houshold applicance) Tasks - CAD modeling / optimization - Prototyping - Microcontroller programming

    €15 / hr (Avg Bid)
    €15 / hr Offre moyenne
    29 offres

    we have ST based microcontroller and we want a developer to develop a USB host for this

    €166 (Avg Bid)
    €166 Offre moyenne
    5 offres
    programming MCU's 2 jours left

    I want to measure the temperature of the liquid in the vials. I am planning to use the...temperature of the liquid in the vials. I am planning to use thermosensor which would be connected to the microcontroller and then need to do programming. Is there anyone who can help me to set up this assembly and help me to do programming of the microcontroller?

    €132 (Avg Bid)
    €132 Offre moyenne
    13 offres

    I need to program a panel of leds built with an STM32F103 microcontroller and SPI drivers for led. when receiving commands through the serial interface or can write to the LEDs. Please read [se connecter pour voir l'URL]

    €129 (Avg Bid)
    €129 Offre moyenne
    3 offres

    Project on ir sensor with microcontroller using embedded coding with spectials Dead line on 20 August 2018

    €148 (Avg Bid)
    €148 Offre moyenne
    1 offres

    I need to program a panel of leds built with an STM32F103 microcontroller and SPI drivers for led. when receiving commands through the serial interface or can write to the LEDs. Please read [se connecter pour voir l'URL]

    €90 (Avg Bid)
    €90 Offre moyenne
    18 offres
    Fan Dimmer 1 jour left

    Develop a Fan and Light Dimmer Module using PIC 18F2550 or any other PIC Micro, controller. Show a working prototype with any of the PIC microcontroller and level of dimming should be 20, 40, 60, 80, 100 %. Default Code and Schematic have been attached.

    €95 (Avg Bid)
    €95 Offre moyenne
    25 offres

    ...received data. The possible cause of this issue is in a PHY receiver – pre FIFO – RS decoder – post FIFO setup, the PHY receiver was originally checking post FIFO empty signal in previously working projects, then is modified to check the pre FIFO instead. Bugs are created in this modification. Therefore, a workaround would be to switch back to check post

    €3878 (Avg Bid)
    €3878 Offre moyenne
    25 offres

    The main goal is to write a program for a ST32 mc that drives a stepper motor driver. (STEP-DIR) The hardware has a touch screen that requires menu system where user can set various settings. Although we already built the hardware but it needs to be changed as we want it to be able to save and store profile settings. Currently we don't have memory

    €1220 (Avg Bid)
    €1220 Offre moyenne
    38 offres

    Microcontroller programming required for MPPT. Must have prior experience with microcontrollers.

    €140 (Avg Bid)
    €140 Offre moyenne
    22 offres
    16 bit audio file player S'est terminé left

    I needed hardware and software based on High speed microcontroller for 16 bit audio file player

    €1276 (Avg Bid)
    €1276 Offre moyenne
    10 offres

    Hi , I am working on a Project to build a machine with Software ( C#,Microcontrollers..) for Printing Data on PVC Card Printer with different Methodes like ( MagStripe Coding-Encoding, Chip Coding contactless/contactbased. ...Printing on Thermotransfer, Mechanical Embossing) Details of the Project will be shared after we agreed . BR TG

    €2814 (Avg Bid)
    €2814 Offre moyenne
    27 offres
    Project for Nitin G. S'est terminé left

    I am working on a datalogger project and need someone to develop a professional solution. However there are currently still several hardware options open, So first stage of project is to narrow down hardware options and refine the specifications. Basic functional specification: - 4 channel 24bit 1kSPS per channel low cost, ultra low power datalogger

    €7 / hr (Avg Bid)
    €7 / hr Offre moyenne
    1 offres

    I need you to develop some software for [se connecter pour voir l'URL] is dancing LED patterb [se connecter pour voir l'URL] details will be provided during chat.

    €3 / hr (Avg Bid)
    €3 / hr Offre moyenne
    13 offres

    Looking for detail design , manufacturing BOM, complete software files for Annunciator. Channel count 24 Channel, Communication - Modbus RS485.

    €88 (Avg Bid)
    €88 Offre moyenne
    6 offres

    ...project aims to develop a smart irrigation system that automatically controls the flow of water, taking the state of the soils moisture level and temperature into consideration. Traditional irrigation systems may cause either over or under-watering, both of which are harmful to plants and may cause plant death. Also, overwatering is a waste of water. The

    €226 (Avg Bid)
    €226 Offre moyenne
    27 offres

    This is about creating a demo which connects ESP32 micro-controller to Bluetooth speaker or hands free. In this case the ESP32 micro-controller will connect to the bluetooth speaker and stream audio. The audio can be streamed via wifi or from audio stored on the ESP32. The source code must utilise Free RTOS. Successful freelancer will get US$300 for

    €159 (Avg Bid)
    €159 Offre moyenne
    6 offres
    PIC Programmer S'est terminé left

    I need some one to help me to measure a PWM duty cycle using CCP module of PIC16F15313 microchip microcontroller.

    €30 (Avg Bid)
    €30 Offre moyenne
    4 offres

    I need some machine code wrote for some simple CPU instructions for a simulation project here are the details: Specification & Design Specify and design a suitable instruction set format for a new small, embedded microcontroller. The designed instruction set will be presented in a "data sheet" style where the details for each instruction, including

    €144 (Avg Bid)
    €144 Offre moyenne
    8 offres

    ...I am looking to use a PT100 thermocouple (perhaps analog with a 0-5v output) to a microcontroller. (perhaps a PIC 16F887 or something else reccommended) through a temperature sensor such as an LM35. I have 110vac power supply that will have transformed power at any voltage required. In addition to the temperature, there will be a pressure transmi...

    €532 (Avg Bid)
    €532 Offre moyenne
    48 offres
    micropython programmer S'est terminé left

    Looking for a micropython programmer to help with a microcontroller GPS.

    €711 (Avg Bid)
    €711 Offre moyenne
    14 offres

    I have an autocad file with a box and a beagle bone black microcontroller and I need to subtract the beaglebone front (panel connectors). So that the box front panel can incorporate the cutouts (either show me how to do it or do it or both). See attached

    €13 (Avg Bid)
    €13 Offre moyenne
    22 offres

    Hi there!! I'm looking for freelancer who can create me a simple mobile size screens that plays video file from SD card using arduino or raspberry pi or any microcontrollers available. please check this youtube video ([se connecter pour voir l'URL]), this is exactly the functionality I need. but it would be great if you can suggest me

    €85 (Avg Bid)
    €85 Offre moyenne
    21 offres

    The project about switching on the block of street light ahead of it and simultaneously switching off the trailing lights when motion is [se connecter pour voir l'URL] are required detect movement and switches on the lights ahead . As the vehicle/person moves ahead the trailing lights automatically switches off. . Alternative operation can be used where the lights are ON with 10% intensity wh...

    €101 (Avg Bid)
    €101 Offre moyenne
    9 offres

    Add a led, a buzzer, and a pushbutton and implement operation in the microcontroller

    €18 (Avg Bid)
    €18 Offre moyenne
    23 offres
    PCB design board S'est terminé left

    Looking for PCB design along with pcb design expertise for a project. Project is about making continous supply to microcontroller which sends data to the internet, it is supplied over the solar cells, and you got to charge some batteries from them. If you are experienced PCB designer, please bid, so we can cooperate together.

    €424 (Avg Bid)
    €424 Offre moyenne
    69 offres
    PIC16F1619 Programmer S'est terminé left

    I have hit a wall while trying to learn how to interact with the PIC16F1619 microcontroller. I want to do two specific things and need some help. Task 1 is to establish communication with an Infineon TLV493d magnetic sensor. Task 2 (independent of Task 1) is to be able to operate a 1x8 array of WS2812b LEDs using the same microcontroller. The key factor

    €115 (Avg Bid)
    €115 Offre moyenne
    18 offres

    I have a Microcontroller based IoT board. Which is meant for taking data from an embedded sensor on board, processing and sending to a mobile phone via Bluetooth.

    €7 / hr (Avg Bid)
    €7 / hr Offre moyenne
    16 offres

    ...for PCB design along with Microcontroller Programming for a project. Automotive based microcontroller that uses on board pressure sensor / barometer along with other sensors to output 0-5volt outputs to other system. Project with take readings from on board pressure sensor along with other external sensors and translate to a 0-5volt ouputs as to make

    €980 (Avg Bid)
    €980 Offre moyenne
    64 offres
    Electronic design engineer S'est terminé left

    ...work carried out. basically the project involves PIR detection to activate a camera to take still photos and then send them via email over the GSM network, so a microcontroller (probably a PIC24F) is involved. The entire unit is powered by battery with charging being done using a solar cell. The budget will be dependant on the design engineer and is only

    €2663 (Avg Bid)
    €2663 Offre moyenne
    22 offres

    Program to read Engine RPM of a truck with SAE J1939 CAN Bus. Microcontroller : STM32F103RBT6 CAN Transceiver : SN65HVD230

    €292 (Avg Bid)
    €292 Offre moyenne
    12 offres

    ...the PCB design of a reader I'd like to build. The Board will need to be able to be powered both using an external power supply and POE. A microcontroller similar to the Raspberry Pi 3 is preferable. The UHF reader module is already designed, and I have the design files for it as well. The idea is to connect this the microcontroller to the readermodule

    €134 (Avg Bid)
    €134 Offre moyenne
    7 offres

    I have to create an assembly program using asmIDE. Dragon12-Plus-USB Trainer - For Freescale HCS12 microcontroller family - 12 hour LCD Digital clock - Clock must display HH:MM:SS AM/PM - Time should be changed by board's key pad or SW 2, SW 3, SW 4, SW 5 - 2nd LCD line must allow an editable message

    €134 (Avg Bid)
    €134 Offre moyenne
    1 offres

    I am looking for someone who has worked with esp microcontroller programming, Work related to EEPROM lib in Arduino. There is not much work, its more a small task

    €69 (Avg Bid)
    €69 Offre moyenne
    45 offres

    Development of dispensing machine Dispenses products after validating user identification, with etherne...identification, with ethernet conecxion and gprs. It must measure temperature and relative humidity. Transactions are recorded and recorded in remote database ARM microcontroller GSM Ethernet Altium IoT Micro SD LCD Battery

    €574 (Avg Bid)
    €574 Offre moyenne
    16 offres

    PCB based on ESP8266 (or other microcontroller) that will collect every 1-2 hours the readings of MPXV7002DP 5V analog signal and send it to a web server (e.g. Thingspeak). The PCB will run on battery (preferably 3V3 18650 with a step up booster to 5V) and will be optimized to deep-sleep for running for 1-2 years on the same batterry (e.g. using adafruit

    €180 (Avg Bid)
    €180 Offre moyenne
    17 offres

    We are developing a prototype for a project. Our core micro controller is the STM32F2 series. The choice of the microcontroller can surely be adjusted to the requirement of the freelancer. We require an experienced GUI developer, who has worked on GUI for embedded systems before. The GUI require should not be very primitive OLED like graphics. It must

    €40 / hr (Avg Bid)
    €40 / hr Offre moyenne
    16 offres

    - Dragon12-Plus-USB Trainer - For Freescale HCS12 microcontroller family - 12 hour LCD Digital clock - Clock must display HH:MM:SS AM/PM - Time should be changed by board's key pad or SW 2, SW 3, SW 4, SW 5 - 2nd LCD line must allow an editable message This needs to be done in assembly (.asm ) code warrior

    €134 (Avg Bid)
    €134 Offre moyenne
    2 offres
    Tracking Module S'est terminé left

    Hi, I need someone to research, study and execute a combination of a Microcontroller along with GSM module to be able to receive a ping and to revert back with some certain details. Please bid for this project if you can source the parts locally or have them in short time. Do not bid if you want to order every single part from different country which

    €334 (Avg Bid)
    €334 Offre moyenne
    7 offres
    Build a Website S'est terminé left

    ...Instruments Products. Our company aims at providing solutions & training for Product Design in the field of Microcontroller and DSP based instrumentation, automotive controls, Wireless Sensor Network and building automation. We manufacture a wide range of embedded system development tools based on Texas Instruments platform (MSP430) and provide technical

    €134 (Avg Bid)
    €134 Offre moyenne
    32 offres

    I have to create an assembly program using asmIDE. Dragon12-Plus-USB Trainer - For Freescale HCS12 microcontroller family - 12 hour LCD Digital clock - Clock must display HH:MM:SS AM/PM - Time should be changed by board's key pad or SW 2, SW 3, SW 4, SW 5 - 2nd LCD line must allow an editable message

    €126 (Avg Bid)
    €126 Offre moyenne
    3 offres

    ...embedded programmer for develop library for FPC1020A fingerprint sensor. Sensor controls threw SPI interface. Control board doesn’t support Linux. It controls by SAM4S microcontroller (ARM Cortex-M4 kernel), but you could use code for different controllers f. e. STM32. The library need to support sensor detecting & correct initialization, raw read picture

    €257 (Avg Bid)
    €257 Offre moyenne
    14 offres

    Project include AVR microcontroller, wireless (wifi or SMS), DC motor, Thermal printer, RFID reader, IR transmitters, IR receiver. This system used for finding parking location for user's vehicle. User scan their registered RFID, the system locate empty & suitable parking location for user's vehicle.

    €296 (Avg Bid)
    €296 Offre moyenne
    20 offres

    I need to program an STM32F103 microcontroller. The project is simple. You receive some frames by serial port or canbus and you must write the text in a matrix or in LEDs. To control the LEDs, the PCB has an SPI driver so that only by sending via SPI the information will turn on the LEDs. I will be assembling here the pcb in parts. You will send me

    €220 (Avg Bid)
    €220 Offre moyenne
    16 offres

    My name is Lunga Jafta and i am a student The project aims at saving energy by detecting the vehicle movement on highways and switching on the block of street light ahead of it and simultaneously switching off the trailing lights. The project requires sensors to detect the vehicle movements and switches on the lights ahead of it. As soon as the vehicle

    €89 (Avg Bid)
    €89 Offre moyenne
    18 offres

    Please read text project. I use ST microcontroller STM32F103 and STP16CPC26XTR (16 channels led driver controller) The software can receive information via RS485 (serial port) and CAN BUS. You can receive 5 frames: Left Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows

    €55 (Avg Bid)
    €55 Offre moyenne
    7 offres