Microchip dspicemplois

Le Label Abeille, marque de la société BEE ANGELS, commercialise un objet connecté qui permet de suivre à distance et en temps réel la santé des abeilles à travers différents capteurs (poids, tempé...marque de la société BEE ANGELS, commercialise un objet connecté qui permet de suivre à distance et en temps réel la santé des abeilles à travers différents capteurs (poids, température, humidité, géolocalisation, orientation...). Plus d'infos sur Nous sommes à la recherche d'un développeur freelance senior ou qualifié, afin d'optimiser un code existant sous microcontrôleur Microchip. Maîtriser imp&e...

Bonjour, je fais actuellement un projet avec un microcontrôleur PIC18F46K22. J'ai ajouté un module de de Microchip le RN1810 pour une connexion wifi. Mon problème est que j'ai besoin d'une application ou site internet qui m'enverra des données par TCP. Mon projet est une horloge. Le but est de pouvoir régler l'heure à distance par internet. C'est pourquoi j'ai ajouté ce module wifi. Je ne connais rien au TCP. Je suis électronicien et j'aimerais quelqu'un qui me fasse cette application. Depuis le microcontrôleur, je recevrais les données pour les traiter. Merci d'avance.

I need a program developed for a microchip aimed at controlling industrial machinery. - The program should focus on device control, ensuring seamless operation and management of the machinery. - The ideal candidate for this task should be proficient in microcontroller programming, particularly in the context of industrial applications. - Familiarity with industrial machinery and relevant safety standards in this field is highly desirable. - Candidates with a background in device control systems are strongly encouraged to apply.

I'm seeking a proficient programmer to translate a short program (approx 1000 lines) written in assembler to C code for a PIC16. The task will require: - creat... - ...replace goto statements with C type loops (for, while, do) and function calls. - adding comment blocks ahead of each function with some notes of what the code is doing. - check where the global variables are actually used and where possible change scope to a local variable. - create the main() function - add comments for anything that looks like a bug or incorrect. - compile code using Microchip XC8 compiler and resolve any errors. Testing /. debugging on hardware is not part of the scope. We will run it here and see if the operation looks close to the original. Please see the attached document for a secti...

For this task, I am seeking an expert with a deep understanding of programming a PIC16F877A microchip. The primary responsibility for this role is to support data acquisition from infrared signal decoder sensors. Specifically: - Experience programming PIC16F877A microchip is a must. - Knowledge in infrared signal decoder sensors for data acquisition integration. - Manage the sensor data interpretation logic. - The main output I'm looking for is accurate and smooth reading and decoding of data from the sensors. Your skill in the task will provide a foundation for accurate data readings and optimal functionality. Specialty in sensor technology is a high preference. Be ready to showcase your similar previous projects. Let's make this a success.

I'm seeking an expert in PIC microcontroller to assist in converting an existing embedded project. The primary goal of this conversion is to replicate the functionality of an existing project on a sister PIC chip. The original project was to create an Ethernet to Serial functionality on the Microchip Ethernet Starter Kit. This functionality was achieved. Now the objective is to move that project to a physically smaller PIC chip of the same family. A new custom daughterboard has been built. Some programmers are thinking to start over with the new chip. I believe this is an uncertain way forward. My request is to convert the existing project rather than start over. I am open to your suggestions. It's essential that interested freelancers have a strong background i...

...project is intermediate. The ideal freelancer for this project should: - Have experience with setting up MPLAB environments. - Understand the intricacies of PIC microcontrollers. - Be proficient with coding and debugging on the Windows platform. This task requires detail-orientated skills and a solid understanding of the coding environment for microchip controllers. I have an existing project developed on MPLAB IDE version utilising the PIC16F877 microchip controller. The compiler used is version . I am using the ICE2000 emulator (USB) and the Pickit 3 development kit. I want to upgrade to PIC16F18877, this device does not seem to be supported by MPLAB IDE I would prefer keeping the existing hardware (emulator, programmer). I have a second project (same environment...

...Wordpress site by selecting the stallion and adding the mare information. This should be able to record the following details. Customer information: Name First and Last, Billing Address, Ship to Address, Additional Address, Contact Number, Email, Company Name (Optional), Vet Name (Optional), Mare owner Name if different than customer name (Optional) Or tick if same Mare Information: Mare Name, Microchip Number, DOB of Mare. Dose: If this is the first dose, the payment must be made in full. Second, third dose are free however if fourth Dose is given then comment needs to be added, Vet has checked and is satisfied. Invoicing: The platform should be able to record payment and invoicing details. When a new order is entered on the Wordpress site, or if done directly on th...

Embedded c programmer required for programming MICROCHIP PIC and ATMEL AVR Microcontrollers. Mostly work required on ATMEGA328P and PIC16F877A Microcontrollers.

I have an ATTINY816 chip here. The TX (PA1) and RX (PA2) are connected to a terminal program via a USB/RS232 converter. All I need is a little command interpreter. When I send "An" (all strings without the quotation marks) to the chip, it should: Return "okn" and set PB0 high for 0.1s. When I send "Bn" to the chip, ...interpreter. When I send "An" (all strings without the quotation marks) to the chip, it should: Return "okn" and set PB0 high for 0.1s. When I send "Bn" to the chip, it should: Return "okn" and set PB1 high. When I send "Cn" to the chip, it should: Return "okn" and set PB1 low. RS232 parameters: 9.6kbps / 8 data bits / 1 stop bit / no parity. Create a well documented little d...

I'm seeking an experienced freelancer to debug an existing Microchip C32 USB program. The program hasn't been performing as designed, as the USB communication with the computer doesn't seem to work: - Evaluating the existing code, identifying and fixing the areas causing the USB communication functions not to execute as desired. - Ensuring optimal performance and stability after the debugging process. - Providing an explanation or report on the identified issues and the solutions implemented. - Ensuring the compatibility of the fix with MCC/Harmony latest version. The ideal candidate would have: - Proficient knowledge and experience in programming Microchip pic32mx using C32. - Sound understanding and hands-on experience in USB communication code. - Proven t...

As a dedicated PIC12F675 developer, I am seeking an expert programmer proficient in Assembly language. Understanding TT223 input management and LED control is vital as this task involves using ...(connected via 3 output pins) should light up. -on each touch 1st led 1 shuld be on and led 2&3 will be off and like wise on second touch led 2nd will be on 1&3 will be off on 3rd touch led3 will be on and 1&2 will be off - and on 4th touch all 3 led will be on and on 5th touch all led will be chaser form - on 6 touch all led will be off Your experience in assembly programming, especially with microchip technology, and understanding of electronic hardware would be the driving factors for success in this project. Note- the output of the ttp223 module is high when toch is d...

...system main points should be: Internal font generation or ability to load external fonts Double-buffering to allow real-time message formation while printing The ideal candidate will possess proven experience of either print engine development within Thermal Labelling, Inkjet, or Thermal Transfer Overprint industries or driver board development within any of the above industries Knowledge of Microchip processors and development systems would be an advantage. The deadline and further project specifics will be discussed with the chosen candidate....

I'm seeking an expert in PIC microcontroller to assist in converting an existing embedded project. The primary goal of this conversion is to replicate the functionality of an existing project on a sister PIC chip. The original project was to create an Ethernet to Serial functionality on the Microchip Ethernet Starter Kit. This functionality was achieved. Now the objective is to move that project to a physically smaller PIC chip of the same family. A new custom daughterboard has been built. Some programmers are thinking to start over with the new chip. I believe this is an uncertain way forward. My request is to convert the existing project rather than start over. I am open to your suggestions. It's essential that interested freelancers have a strong background i...

I'm on the lookout for a highly knowledgeable Microchip assembler expert well-versed in ASM code. The project entails updating a program I use for a light. Here's what I'm specifically looking for: - Strong knowledge and previous experience with Microchip assembler and ASM code. - Documented history of updating, optimizing, and troubleshooting programs. - Demonstrable evidence of past projects using ASM code would be a sure-fire bonus. In your bid, please, specify details about your past experiences relevant to this task. The knowing of your ability to execute this job efficiently is vital to your selection. Ideally, if you've worked on Microchip chips before or have experience with light-programming, you could be the perfect fit! The project in...

Use Microchip Harmony to setup and configure a project using the PIC32MX174F256B. Experience is required with teh PIC32MX family and Harmony, MPLAB X & XC32

I require assistance with programming and configuring an Atmel M90E36A. - Task: The primary service needed is writing a C++ code for the stated IC, which will allow for an auto calibration code from Microchip to be implemented. - Outcome: Ultimately, the implementation of this code should result in improved precision of readings. Ideal Skills and Experience: Proficiency in C++ is a must, along with prior experience in dealing with IC programming. Experience in working with Atmel M90E36A specifically, will be an added advantage. Knowledge on Microchip technology and calibration methods would be beneficial in achieving the desired outcome.

I'm looking for a skilled individual who can design a custom PCB that features an ESP8266 microchip. The PCB needs to have the following features: We managed to build a working prototype that works with multiple boards, including a Wemosd D1 mini, and a suil moisture sensor But it's better to have it in a single board all together. We handle building the software.

In need of a dedicated and proficient individual who can spark my dream to life - developing a cat-specific microchip tracking system. What I Am Looking For: • Extensive knowledge of microprocessing and GPS functionality • Previous experience in pet-related tracking technology would be ideal, however not necessary • Prowess in designing user-friendly interfaces Tracking Functionality: As for the tracking functionalities, since I skipped this during the question phase - I'm keeping an open mind. I am interested in hearing your expert recommendations so that this custom, feline tracking system is innovative, reliable, and most importantly effective. Timeline: There is no rush on my part, I am looking for quality driven results over rushed deliveries. Consequen...

...Module and a PIC 8bit MCU. The project requirements are as follows: - RFM96 Module (Datasheet attached) - Please use interrupts to communicate with RFM96. - Use LoRa protocol to communicate - Please consider in this project after sending data each time uC and RFM96 will be fully powered off, that means next turn should take minimum time to initialize everything. - PIC 8bit MCU programmed with Microchip MPLABX & XC compiler. - Setup one module as Host and other 6 as Client so that host can listen up to 6 clients and receive data - RFM96 has receiving buffer where you can store received data and one by one read buffer through MCU and print received data on serial port. Note: - Please note that there is no sensor used in this application you will be sending just raw Hex values...

I am looking for a freelancer who can adapt the fastLED library from Arduino to a Microchip PIC microcontroller. Specific Microchip PIC microcontroller model: PIC18F Skills and Experience: - Extensive experience with Microchip PIC microcontrollers - Proficient in programming and adapting libraries for microcontrollers - Familiarity with the fastLED library and its functionalities - Ability to work on commercial projects and meet deadlines Objective: The main objective of this project is to adapt the fastLED library to a Microchip PIC microcontroller for the development of a commercial product. also want to do some programming of the led and patterns

Project Title: C programming microchip studio Microchip: ATSAME54 explained pro development board Project Requirement: - The client has a specific requirement in mind for the project Timeline: - The project should be completed within a month Ideal Skills and Experience: - Proficient in C programming language - Experience with microcontroller programming, specifically for the ATSAME54 microchip - Familiarity with Microchip Studio or similar development environment - sensor communication protocols (SPI, UART, I2C) - Ability to understand and implement specific project requirements

...Hardware Designing PCB Designing Schematic/Circuit Designing PCB Assembling 3D Design and Printing Automation AI-assisted development App Development, both Android and iOS Web Application Development Your verifiable expertise should extend to tools like Altium, Eagle, KiCad, Orcad, Proteus EasyEDA, Solidworks, Fusion 360, Arduino IDE, STM32 IDE, MPLAB, MATLAB, Microchip Studio, Eclipse, Intellij, Netbeans, Atom, FlatCAM, Android Studio, XCode, VSCode, WinAVR. Avoid using copy/paste bids; only bid if you're proficient and capable of handling the jobs we offer. In your first reply, provide a comprehensive portfolio with references outside Freelancer for verification. NOTE! Failure to check our profile will disqualify you. Ensure your bid i...

Project Description: - I a...in implementing the Stack Bacnet Protocol for building automation purposes with microcontroller. - The required communication medium for the Bacnet protocol is MSTP. - I need assistance with both the software and hardware aspects of the Bacnet implementation. - The ideal candidate should have experience in Bacnet protocol implementation, specifically in building automation with microcontroller microchip 8 bits PIC18F57Q43. - Knowledge of MSTP communication medium is necessary. - Proficiency in both software and hardware aspects of Bacnet implementation is required. - Strong problem-solving skills and attention to detail are essential for this project. - The freelancer should be able to work independently and deliver high-quality results within the given ...

...Module and a PIC 8bit MCU. The project requirements are as follows: - RFM96 Module (Datasheet attached) - Please use interrupts to communicate with RFM96. - Use LoRa protocol to communicate - Please consider in this project after sending data each time uC and RFM96 will be fully powered off, that means next turn should take minimum time to initialize everything. - PIC 8bit MCU programmed with Microchip MPLABX & XC compiler. - Setup one module as Host and other 6 as Client so that host can listen up to 6 clients and receive data - RFM96 has receiving buffer where you can store received data and one by one read buffer through MCU and print received data on serial port. Note: - Please note that there is no sensor used in this application you will be sending just raw Hex values...

I'm looking for an experienced freelancer who can help me with a pricing of vet services (grooming, general surgeries, vaccinations, microchip and consultation) for vet clinics in Riyadh. The summary must include comparison of prices between more than 10 vet clinics in a spreadsheet format. This is a great opportunity to showcase your research and data collection abilities, as well as presenting the final results in a professional and user-friendly way. I'm looking forward to seeing your submissions soon. Thank you for your time.

I have a firmware system written in PicBasic for a microchip 18F46K22 processor. I am trying to convert to a microchip 18F47K40 processor. I am using the Taylor interrupt code to handle 2 serial ports and a timer. The original code is running correctly but has insufficient memory space for future upgrades. I am looking for help in getting the system up and running.

...feature/issue. 5. Collaboration: Collaborate with our in-house hardware and software engineers to ensure the firmware is fully integrated with all system components. 6. Troubleshooting: Identify, diagnose, and resolve firmware issues in a timely manner. 7. Compliance: Adhere to industry standards and company policies throughout the firmware development process. Requirements: - Well versed using the Microchip dsPIC33 microcontrollers - Experience with Espressif ESP32 S series microcontrollers - Proven expertise in digital power control (synchronous buck, boost, etc). - Proficiency in SPI, I2C, WiFi, Ethernet, and Bluetooth protocols. - Experience with real-time operating systems. - Knowledge of secure coding practices. - Strong programming skills in C/C++. - Familiarit...

I am looking for a programmer to help me develop an intricate program for a Microchip 12f510. The program must be written in C and it needs to have the capability to control peripherals. Additionally, I have a specific microchip model in mind for testing the program. Finding the right person for this job is imperative, especially since the microchip programming requires a specific technical expertise. If this sounds like a project that you would be committed to taking on, please reach out to me with your qualifications and experience.

...project involving the LoRa RFM96 Module and a PIC 8bit MCU. The project requirements are as follows: - RFM96 Module (Datasheet attached) - Prefer using interrupts to communicate with RFM96. - Please consider in this project after sending data each time uC and RFM96 will be fully powered off, that means next turn should take minimum time to initialize everything. - PIC 8bit MCU programmed with Microchip MPLABX & XC compiler. - Sending data to TTN through OTAA and ABP method at 915MHz (North America) Note: - Please note that there is no sensor used in this application you will be sending just raw Hex values. - We can talk about which PIC uC to use so that to test the we do not need to reconfigure everything. - You are welcome to use some Github library or functions, in tha...

We have a current commercial system that runs on the dsPIC33EP512GP506 (Ansi C code). Also we want to take advantage for future development of the capabilities of the ESP32 S3 especially ESP NOW RF. This project has 3 key elements: 1) Redesign the current circuit board to be exactly the same size, same plugs, same mounting holes and peripherals but change the microprocessor. Will require new schematic and gerber files 2) Migrate the C code especially device drivers to run efficiently on the ESP32 S3 ensuring software timers work at the same speed as the current ones. 3) Build in support for ESP NOW 4) Build 20 prototype boards with all components to fully prove the design. We will provide 2 sets of peripherals to the freelancer. Peripherals are: 1) 4 x 16 character LCD (including bac...

I am seeking an experienced freelancer who is familiar with the microchip dsp33 series and digital power electronics firmware. Tasks: - Writing firmware for the project - Troubleshooting and debugging any issues that arise during the development process Requirements: - Prior experience with microchip dsp33 series and digital power electronics firmware - Strong firmware development skills - Ability to work efficiently and meet tight deadlines Timeline: - The project is urgent and needs to be completed within 1 week If you have the necessary skills and experience, please submit your proposal along with examples of your previous work in this area.

Project Title: SAMD (Atmel/Microchip) programming Description: I am looking for a freelancer who is skilled in programming the SAMD21 microcontroller, especially the SAMD21's internal configurations. I am a skilled C programmer with much experience with Atmel/Microchip microcontrollers, using ASF sometimes (when it's convenient) but also coding without ASF. However, sometimes I encounter problems getting the correct C code to configure some aspects of the SAMD microcontrollers. I am looking for expert help so I don't have to spend too much time working on unexpected SAMD configuration difficulties. Specific freelancer requirements: - Very experienced in programming the SAMD21 microcontroller - Proficient in programming languages C Timeline: - The project t...

I am looking for a freelancer who is experienced in MPLAB using Microchip Harmony v3 framework. The freelancer needs to create a new project in MPLAB for PIC32MZ, i´m using this board: so is good if the freelancer owns this board. MCU: PIC32MZ2048EFH144 PHY: LAN8740 The project must: - Assign IP to the ethernet; - Respond to PING commands; - Receive 1000 bytes on UDP port 9000; - Send these 1000 bytes on SPI1 using DMA.

I am looking for an experienced PCB designer with intermediate level skills to help me with a project. The ideal candidate should have experience in designing mixed-signal PCBs and should be familiar with Microchip or Xilinx FPGAs. Requirements for the project include: - Designing 4 simple PCBs - Integrating both digital and analog components on the PCBs - Proficiency in using Xilinx FPGAs Skills and experience required for this job: - Intermediate level PCB design - Experience with designing mixed-signal PCBs - Familiarity with Microchip or Xilinx FPGAs If you have the necessary skills and experience, please submit your proposal.

I am looking for a Freelancer to help me with a project involving the C32-AWS-RTOS-Ethernet-MQTT-PulseCount-Timer. The main goal of this project is to implement pulse counting on PIC32 using MCC and RTOS to send to AWS vi...is to implement pulse counting on PIC32 using MCC and RTOS to send to AWS via MQTT. Specifically, I need assistance on using a real-time operating system for AWS IoT, implementing the MQTT protocol for data communication, and integrating pulse counting and timer functionality for data. The hardware platform required for this project is PIC32, and the software services/libraries necessary are Microchip MCC and RTOS. If you feel that you have the necessary experience and expertise to fulfill this project, please contact me! Please note I only deal direct with the d...

I am looking for a freelancer to help me with my project titled "IQ Connect - BLE new hardware". Purpose of the new hardware: - The purpose of the new hardware is to connect a newly developed device using Bluetooth Low Energy (BLE) with the Garmin Vivoactiove 4 and send timestamped 2byte value over to the Garmin Watch. (5/sec) The hardware has Microchip RN4020 for BLE communication. Appropriate firmware adjustments are needed. Desired range of the BLE hardware: The desired range of the BLE hardware is short range, up to 10 meters.

using PIC16F15386 for 9 analog i/p, control 13 latching relay, UART o/p to LCD display, UART o/p to ESP32C3, All i/p to be categorized to 6 levels, hysteresis to be considered, 3 different count down timer for each i/p based on 20ms time base. programming to be using PIC microchip assembly instructions. PCBA, relays, LCD are ready to test the program. a. Programming using microchip assembly instructions. C programming is not acceptable as it not perfect in our project b. The programmer should be familiar with control of latching relays. OR electronics engineer with 8-10 years’ experience. c. The successfulness will be considered if the program work on our ready build project. d. The detailed requirements will be provided if the freelancer accept above requirements.

I need a program for a rotary encoder that can generate the correct code to drive a MicroChip MCP 42010 digital potentiometer. The 42010 has 2 channels and there would be 2 rotary encoders, one for each output channel

Needs a specialist that understands...understands the CC1101 and the settings used by it for 10kbps, 19.2kbps, 100kbps for Battlefield Sports with a custom RF packet protocol consistent with the current SATR3 system. Ideally the solution is based on the ESP32 with a USB port but includes the current 4x16 character LCD. This project uses a modified version of the current SATR3 board that has a ESP32 processor rather than the older dsPIC. It connects via a USB serial port to an existing Windows C# application. The Windows C# application sends by serial port a packet of information which is then re-transmitted in SATR3 format by CC1101. Also RF packets received are to be filtered based on Command Code and if they have the right command code are passed by USB port to the C# ap...

Hi, we have an old device with an STM8S103F3P6 integrated chip. We need copy the updated software in the chip to install in other identical devices. We never have worked with MicroCHIP IDE or similar. The task is training to us and suggest what components buy to copy the software of one device ( updated one ), to the others ( old versions ).

I am looking for a freelancer who can implement servo mode for the AK 80 64 T motor actuator in...actuator in Servo mode. Output deliverable for the program code is listed below. 1. Running the AK 80 64 motor in position-velocity multi loop mode, where user is giving desired position and desired velocity. AK 80 64 T motor have to move in accordance with the desired position and velocity values. 2. The position and velocity data to be printed in serial terminal in 5 milli sec interval I have microchip CANanalyzer with me to check transmitted and received CAN messages. I have R link to configure AK 80 64 T motor I can share manual of Actuators in the inbox. Once I get code, I can test code in the hardware setup and give feedback for code modification till expected deliverables a...

Firmware conversation from dsPIC code to ESP3. One conversion will be for the #define Wand and the other #define OLDBOARD for the Chest. Ideally keep the same code base for both usages and just compile with the right #define for the target. Objective is working on the bench top (IR In, IR out, ESP-NOW, LCD, Sound, LED's).

I am using Microchip PIC controllers and BLE controllers to allow Bluetooth communication between a handset and a headset. The code is in C.

I have a PIC controller and Microchip RN4870 BLE controller in a handset (Central) I have a PIC controller and Microchip RN4678-V/RM100 BLE controller in a headset (peripheral) I want both BLE controllers to appear as UARTs so I can pass short text strings, once per second. General requirements Devices simply pair, no authentication No power up sequence required for pairing No keyboard or UI required by user for pairing process

I have a handset (BLE central device) using a PIC controller and the Microchip RN4870 BLE controller I have a headset (BLE peripheral device) using a PIC controller and the Microchip RN4678-V/RM100. I need to be able both BLE controllers to appear as UARTs so I can send short text strings between them. General BLE Requirements Handset will only look for headset advertisement No authentication, just pair No keyboard or UI required No power up sequence required for pairing i.e. handset must be scanning before headset is advertising or vice versa. Thanks!

This is a single phase fan control system for small (0.1-2KW) fan motors, using a mosfet H bridge at 400VDC, looking for 2pwm outputs to control the H bridge (1 for + side and 1 for - side) with 0-10V control signal and enable inputs using a Microchip PIC device, preferably a PIC16F device. older microchip AN note attached

I am looking for a freelancer who can help me develop a 3 Phase Sequence Monitor for my system. The ideal candidate should have experience in electrical engineering and be familiar with microcontrollers and relay control systems. A low cost Microchip microcontroler shall be used. The power for the microcotroller, relay and interface circuit should be obtained from the 3 phase mains with a linear impedance converter (i.e. not switching.) Function description: After 3phase mains is applied, the circuit should start the detection. The power led should indicate that the microcontroller is working and performing the sequence detection. The output relay and the "Phase Ok" led should be synchronized ( using the same microcontroller pin is Ok.) Scope: Provide firmware, Alti...

I have a small robot made by myself (using seri motor). Now I have to connect it to IoT using arduino and python. The ESP-8266 microchip is connected to my robot as well. The deadline is Thursday 27th of April (night). I have the link with the specific instructions and video tutorials that say exactly what is needed to be done, so you don’t have to come up with anything.

I have a small robot made by myself (using seri motor). Now I have to connect it to IoT using arduino and python. The ESP-8266 microchip is connected to my robot as well. The deadline is Thursday 27th of April (night). I have the link with the specific instructions and video tutorials that say exactly what is needed to be done, so you don’t have to come up with anything.