Capacitive touch sensor

$30-250 USD

Fermé

Publié

il y a environ 5 ans

$30-250 USD

Payé lors de la livraison

I am creating a simple touch sensor for a drawer that I will be showing my students. I have at my disposal these tools. 1) Microcontroller board ([login to view URL]) 2) TP4056 lipo charger 3) 2000 mAH lipo battery 4) Pair of PWM servos ([login to view URL]) What I want to do is use the built in touch sensor pins of the microcontroller board to control the servo. The microcontoller has three pins can that can be used as hardware capacitive touch sensors with no additional components required as noted here ([login to view URL]) When the pin or wire attached to the pin is touched, the servo moves a configurable number of degrees in one direction. When the pin is no longer being touched, it returns to the home position. If the sensor is tapped twice in succession, the servo moves the same configurable number of degrees but stays in that position until touched again. I basically have the materials already, I just need the Arduino code (preferred) code. But can also use the CircuitPython so long as you tell me what program to use. I will also send you the microcontroller if you will need it. I am hoping that you already have the other materials or some version. But will be happy to send you those as well.

Arduino

Electrical Engineering

Electronics

Microcontroller

PCB Layout

N° de projet : 18811262

Concernant le projet

14 propositions

Projet à distance

Actif à il y a 5 ans

Cherchez-vous à gagner de l'argent ?

Adresse e-mail

Avantages de faire une offre sur Freelancer

Fixez votre budget et vos délais

Soyez payé pour votre travail

Surlignez votre proposition

Il est gratuit de s'inscrire et de faire des offres sur des travaux

14 freelances proposent en moyenne $164 USD pour ce travail

@amelectronics

Hello sir, I have experience in designing electronics circuits and can make your project. i will make your project completely on my side and will deliver a working prototype. I can also develop hardware compatible android and windows based apps. I can show you my previous experience on similar projects. If you wish we can discuss in chat. Thanks

$200 USD en 10 jours

4,8

(69 commentaires)

7,1

@mechatronicsengr

Hi, I hope you are doing well. I have extensive experience in Arduino Programming and development. Yes I have similar hardware available and I can execute this project in less possible time. Looking Forward, Khawaja

$200 USD en 3 jours

4,8

(88 commentaires)

7,2

@jartur

Hello, I can help you with your Arduino touch code project, but. I need more information about your project, other components, deadline, and other things like some picture of your current components and maybe is a good idea send to me one board of it to test because i don't have this model board. Deliverable items: - Code Arduino well explained and commented. - Wiring Arduino diagram. If you have any questions feel free to ask and contact me before your order. Thank you and Have a good day, John.

$250 USD en 22 jours

5,0

(106 commentaires)

6,0

@anikhossain285

It's a simple job for me. I have experience with this kind of projects for over 4 years. Probably you don't need to send me the board. I have all other things in my arsenal. If you have any questions ask me in the message. I will be happy to answer all your questions.

$77 USD en 1 jour

4,9

(13 commentaires)

5,0

@soltracker

yes sir, its me imad, have done 200+ projects regarding pic, arduino, circuit analysis and much more, U will get the best work accompanied with brotherhood,,,,,,,,,,,,,,,,,,,,,,,,,,,

$90 USD en 3 jours

4,8

(56 commentaires)

4,7

@danish2051

Hi We have team of experts having 6 plus years of exp in embedded systems,IoT,arduino,pcb design and dovelopment. In your project the signal genrate on touch pin. When anybody touch the pin the the signal is changed so thats the way to use the touch pins for use servos. We already did this work on arm countrolers. Thanks

$255 USD en 10 jours

4,7

(18 commentaires)

4,3

@Rockbotico

Hi. I can help you with your project. I can try sending testing codes, and solution code before you accept my ofert. Best regards.

$88 USD en 3 jours

5,0

(4 commentaires)

4,1

@JesusHw

Hi there, I have wide experience in in PCB design and development of more than 5 years. I did many kinds of PCBs, prototypes and firmware developments. Using different platforms as Arduino and Raspberry Pi. Mostly programming in C and Python languages. I am currently working in IoT specifically modules for developers and I worked before in a GPS device for outdoor sports. I would like to support you in your development and I would like to know more details about the project. Additionally if you need help with the hardware I could support you on that too. I can make a PCB for Battery charger TP4056. I see the description of the project is very realistic. I would be glad to study your development in detail. Kind regards, Jesus Lopez Eindhoven, Netherlands

$190 USD en 4 jours

5,0

(1 commentaire)

3,4

@robertwallner

Hi, I can write the code for the system. I don't need any hardware, only the datasheets, which all seem to have, Please do message me for more info. Best regards, Robert Wallner

$180 USD en 2 jours

5,0

(1 commentaire)

2,6

@HemzaHB

Hi i am an embedded systems engineer and i have already done a similar project so i can do that project absolutely for you ! have a great day !

$88 USD en 3 jours

0,0

(0 commentaires)

0,0

@kanakaju

1. plan architecture 2. sort out interface details 3. make a design 4. implement stubs 5. coding 6. integrate 7. I have lot of experience in touch screen driver for different systems. follow these guidelnes

$250 USD en 3 jours

0,0

(0 commentaires)

0,0

@abhinaymanandhar

hi, I possess professional experience in Arduino Programming. I did projects like Autonomous vehicle, Quadcopters using Arduino etc. Like programming in Arduino Ide. Ping me if interested

$222 USD en 3 jours

0,0

(0 commentaires)

0,0

@AhAbdAulMageed

I'm an Embedded systems developer (Software and hardware developer and designer) 6 years ago. I taught more than 500 student on the last 2 years Embedded systems diploma in our college. Then I worked as a freelancer but an offline freelancer, some of my friends give me the job. And Now, I'm an embedded system developer in a company named "Artronix". It's for an engineering solutions , courses, supporting graduation projects, and for R&D (Researching and development). I designed many software solutions & PCB designs, there's some pcb designs on my profile, you can see it. So, I can do your project from A to Z. If you want to hire me, just send me.

$55 USD en 3 jours