Vous suivez désormais
Erreur de suivi de l'utilisateur.
Cet utilisateur n'utilise pas les utilisateurs à le suivre.
Vous suivez déjà cet utilisateur.
Votre plan d'adhésion ne permet que 0 suivis. Améliorez ici.
Ne suit désormais plus
Erreur lors de l'arrêt du suivi de l'utilisateur.
Vous avez désormais recommandé
Erreur lors de la recommendation de l'utilisateur.
Une erreur a eu lieu. Veuillez rafraîchir la page et réessayer.
E-mail désormais vérifié.
santa fe,
united states
Il est actuellement 1:43 AM ici
Rejoint le février 10, 2016
1 Recommandation
David C.
@ddclarknm
4,2
4,2
100%
100%
santa fe,
united states
100 %
Travaux complétés
100 %
Suivant le budget
100 %
Dans les temps
N/A
Taux de réembauche
Electrical Engineer
Contactez David C. concernant votre travail
Connectez-vous pour discuter de tous les détails via la messagerie.
Portfolio
Portfolio
KiCad schematic for radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
KiCad schematic for radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Design in progress for a radio repeater controller
Commentaires
Modifications enregistrées
Montre1 - 2 sur 2 commentaires
$1 111,00 USD
Microcontroller
Embedded Software
R
•
$166,00 USD
Electronics
Electrical Engineering
Concept Design
PCB Layout
T
•
Expérience
Independent Consultant
févr. 2016 - juin 2016 (4 mois, 1 jour)
Worked with a team of biologists, chemists, and other engineers to develop electronics for detecting specific proteins in blood samples. The project involved providing design input, laying out and testing a PCB with many analog input channels, a multiplexing analog to digital conversion scheme, and an embedded micro controller unit.
Acting Engineering Supervisor, Sigma Labs, Inc., Santa Fe, NM
déc. 2015 - févr. 2016 (2 mois, 1 jour)
Supervised the Sigma Labs, Inc. engineering team from a management perspective. The team consisted of electrical, mechanical, and software engineers.
Lead the team from a perspective of fostering technical innovation by encouraging both independent and team thought and problem solving.
Provided a bridge to senior management while simultaneously advocating for the team members and encouraging their personal and professional growth.
Senior Electrical Engineer, Sigma Labs, Inc., Santa Fe, NM
juin 2014 - févr. 2016 (1 an, 8 mois)
Directed the integration of mechanical and electronic components into sophisticated direct metal laser sintering additive manufacturing machines (metal 3D printers). This required a working knowledge of both mechanical and electrical design best practices combined with an engineering instinct to assemble systems that will function robustly in real world environments.
Éducation
Master of Science
(3 ans)
Bachelor of Science in Engieering
(4 ans)
Publications
Measurements of the reduced force coefficients for H2, N2, CO, and CO2 incident upon a solar panel
Phys. Rev. E, vol. 58, no. 1, pp. 492–503, Jul. 1998
The reduced force coefficients were measured for H2, N2, CO, and CO2 incident upon a solar panel array material, SiO2-coated Kapton, Kapton, and Z-93-coated Al. The coefficients were determined by measuring both the magnitude and direction of the force exerted on the surfaces by molecular beams of the gases.
Digital spatial filter made from a SQUID array
IEEE Transactions on Applied Superconductivity, vol. 13, no. 2, pp. 779–782, 2003.
A linear array of high transition temperature SQUID, has been configured to work as digital spatial filters. The SQUID filters can be configured to obtain a desired spatial frequency response. We describe their design using a technique known as Frequency Sampling, which consists of specifying a discrete spatial frequency response for the SQUID array spatial filter.
Weld quality evaluation using a high-temperature SQUID array
IEEE Transactions on Applied Superconductivity, vol. 13, no. 2, pp. 235–238, 2003
This paper presents preliminary data for evaluating weld quality using high-temperature SQUIDs. The SQUIDs are integrated into an instrument known as the SQUID Array Microscope, or SAMi
The National Ignition Facility Neutron Imaging System
Review of Scientific Instruments, vol. 79, no. 10, pp. 10E529–10E529–5, 2008
The National Ignition Facility (NIF) is scheduled to begin deuterium-tritium (DT) shots possibly in the next several years. One of the important diagnostics in understanding capsule behavior and to guide changes in Hohlraum illumination, capsule design, and geometry will be neutron imaging of both the primary 14 MeV neutrons and the lower-energy downscattered neutrons in the 6–13 MeV range
Neutron imaging development for megajoule scale inertial confinement fusion experiments
J. Phys.: Conf. Ser., vol. 112, no. 3, p. 032078, May 2008
Neutron imaging of Inertial Confinement Fusion (ICF) targets is useful for understanding the implosion conditions of deuterium and tritium filled targets at Mega-Joule/Tera-Watt scale laser facilities.
Progress toward the development and testing of source reconstruction methods for NIF neutron imaging
Review of Scientific Instruments, vol. 81, no. 10, pp. 10D311–10D311–3, 2010.
Development of analysis techniques for neutron imaging at the National Ignition Facility is an important and difficult task for the detailed understanding of high-neutron yield inertial confinement fusion implosions.
Investigations into reconstruction techniques for the NIF Neutron Imaging System
J. Phys.: Conf. Ser., vol. 244, no. 3, p. 032051, Aug. 2010
Neutron imaging is currently being developed as a primary diagnostic for inertial fusion studies at the National Ignition Facility (NIF). It is an attractive diagnostic for measuring asymmetries in the burn region and will be able to operate at neutron fluences found during ignition scale implosions.
Modeling the National Ignition Facility neutron imaging system
Review of Scientific Instruments, vol. 81, no. 10, p. 10D335, Oct. 2010.
Numerical modeling of the neutron imaging system for the National Ignition Facility (NIF), forward from calculated target neutron emission to a cameraimage, will guide both the reduction of data and the future development of the system
Performance characteristics of the neutron imaging diagnostic at NIF
2011 Abstracts IEEE International Conference on Plasma Science (ICOPS), 2011, pp. 1–1
No abstract available
A new gated x-ray detector for the Orion laser facility
SPIE Proceedings, 2012, vol. 8505, p. 85050K–85050K–10
Gated X-Ray Detectors (GXD) are considered the work-horse target diagnostic of the laser based inertial confinement fusion (ICF) program. Recently, Los Alamos National Laboratory (LANL) has constructed three new GXDs for the Orion laser facility at the Atomic Weapons Establishment (AWE) in the United Kingdom
The neutron imaging diagnostic at NIF (invited)
Review of Scientific Instruments, vol. 83, no. 10, p. 10D317, Aug. 2012.
A neutron imagingdiagnostic has recently been commissioned at the National Ignition Facility (NIF). This new system is an important diagnostic tool for inertial fusion studies at the NIF for measuring the size and shape of the burning DT plasma during the ignition stage of Inertial Confinement Fusion(ICF) implosions.
Relativistic Transparency Experiments at the Trident Laser.
APS Meeting Abstracts, vol. 1, p. 6009. 2013
With near-diffraction-limited irradiance of 3 × 1020 W/cm2 on target and prelase contrast better than 10-9, we have accessed the regime of relativistic transparency (RT) at the Trident Laser. The goal was to assess electron debris emitted from the target rear surface with phase-contrast imaging (PCI) and current density measurements (hence, the total electron current). Companion diagnostics show whether the experiments are in the target-normal-sheath-acceleration mode or in the RT regime.
Contactez David C. concernant votre travail
Connectez-vous pour discuter de tous les détails via la messagerie.
Vérifications
Certifications
Meilleures compétences
Parcourir les freelances similaires
Parcourir les présentations similaires
Invitation désormais envoyée !
Merci ! Nous vous avons envoyé un lien par e-mail afin de réclamer votre crédit gratuit.
Une erreur a eu lieu lors de l'envoi de votre e-mail. Veuillez réessayer.
Échec de copie dans le presse-papier, veuillez réessayer après avoir ajuster vos permissions.
Copié dans le presse-papier.
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.