Logo FreelancerComment cela fonctionneParcourir les emplois Se connecter S'inscrire Publier un projet
EXPLORER
3D Animation 3D Modelling 3D Rendering CAD/CAM Solidworks
Profile cover photoundefined
Vous suivez désormais .
Erreur de suivi de l'utilisateur.
Cet utilisateur n'utilise pas les utilisateurs à le suivre.
Vous suivez déjà cet utilisateur.
Votre plan d'adhésion ne permet que 0 suivis. Améliorez ici.
L'utilisateur n'est désormais plus suivi.
Erreur lors de l'arrêt du suivi de l'utilisateur.
Vous avez désormais recommandé
Erreur lors de la recommendation de l'utilisateur.
Une erreur a eu lieu. Veuillez rafraîchir la page et réessayer.
E-mail désormais vérifié.
Avatar de l'utilisateur
$8 USD / heure
Drapeau de UKRAINE
odessa, ukraine
$8 USD / heure
Il est actuellement 11:00 AM ici
Membre depuis le mars 31, 2016
1 Recommandation

Anatolii K.

@anatol33

4,9 (23 commentaires)
5,9
5,9
$8 USD / heure
Drapeau de UKRAINE
odessa, ukraine
$8 USD / heure
96 %
Travaux complétés
100 %
Suivant le budget
100 %
Dans les temps
3 %
Taux de réembauche

Engineer - Electronics, 3D modeling

I’m an electronics engineer with more than 20 years of experience, have 7 years of experience in SolidWorks. I can provide following services: - Electronics designs based on ARDUINO platform, both software and hardware. Experience with Atmega and ESP32 controllers. - C++ programming in Arduino IDE. - Experience with RF equipment, communications. - Experience with RC models electronic equipment: transmitters, receivers, servos, accelerometers, etc. - 3D modeling based on sketches, drawings, photos, etc. Have experience in modeling for 3D printing. - 3D renderings. - Designing new products. - Electronics designs based on ARDUINO platform, both software and hardware. Besides electronics I have good background in mechanics, aerodynamic, physics. I work fast and my prices are competitive. I’m using SolidWorks 2011 version. Located in Ukraine. Languages: English – good German – basic Russian, Ukrainian – native.
Freelancer 3D Modellers Ukraine

Contactez Anatolii K. concernant votre emploi

Connectez-vous pour discuter des détails via la messagerie.

Éléments du portfolio

A robotic trolley for 100 kg load, using Omni wheels, with an ultrasonic  obstacle avoidance sensor.
I did:
- Choosing main parts, as gear-motors, drivers for them, battery; with all calculations involved.
- Making a 3D model intended for manufacturing, using ready-made parts and metal profiles from sites specified by the customer.
- Developing electronics to control robot's movements: An Arduino based controller (ESP32) with some additional elements, complete wiring diagram. 
- Writing software to control the robot over Wi-Fi. The robot's controller acting as Access Point with an http server and a web page on it, so control is possible from a browser.
- Testing and debugging the code, On my side outputs to the motor controllers were connected instead to LEDs on a demonstration panel, to show the functionality on video - manipulations on the web page and reactions of controller.
On this stage the project was considered as completed.
Robotic Trolley
A robotic trolley for 100 kg load, using Omni wheels, with an ultrasonic  obstacle avoidance sensor.
I did:
- Choosing main parts, as gear-motors, drivers for them, battery; with all calculations involved.
- Making a 3D model intended for manufacturing, using ready-made parts and metal profiles from sites specified by the customer.
- Developing electronics to control robot's movements: An Arduino based controller (ESP32) with some additional elements, complete wiring diagram. 
- Writing software to control the robot over Wi-Fi. The robot's controller acting as Access Point with an http server and a web page on it, so control is possible from a browser.
- Testing and debugging the code, On my side outputs to the motor controllers were connected instead to LEDs on a demonstration panel, to show the functionality on video - manipulations on the web page and reactions of controller.
On this stage the project was considered as completed.
Robotic Trolley
The task was to convert a full size mass produced electric cart into a remote controlled one, charged by folding solar panels, equipped with cameras on a gimball, intended for patrolling and border guarding.
My task was to create a main controller, taking from and sending data to a communication equipment provided by another company and converting that data to signals to all servos and actuators controlling vehicle, gimball, cameras and folding/unfolding solar panels.
I made both hardware and software, also mounted and tested it personally visiting the country.
Remote Controlled Electric Vehicle
The task was to convert a full size mass produced electric cart into a remote controlled one, charged by folding solar panels, equipped with cameras on a gimball, intended for patrolling and border guarding.
My task was to create a main controller, taking from and sending data to a communication equipment provided by another company and converting that data to signals to all servos and actuators controlling vehicle, gimball, cameras and folding/unfolding solar panels.
I made both hardware and software, also mounted and tested it personally visiting the country.
Remote Controlled Electric Vehicle
A device for measuring the inclination angle of a ground drill head mounted on a truck and the pressure in it's hydraulic system. The inclanation angle had to be read wireless, Wi-Fi was used. ESP32 controllers were used for transmitting and receiving of a signal from a 3-axis accelerometer, Arduino Mega - for controlling a touchscreen display.
Device for reading sensors remotely
A device for measuring the inclination angle of a ground drill head mounted on a truck and the pressure in it's hydraulic system. The inclanation angle had to be read wireless, Wi-Fi was used. ESP32 controllers were used for transmitting and receiving of a signal from a 3-axis accelerometer, Arduino Mega - for controlling a touchscreen display.
Device for reading sensors remotely
An electric shoe brush with container for the soap water ejected by a micro pump. A fully functioning prototype was designed, started from choosing all parts needed.
ELECTRIC SHOE BRUSH
An electric shoe brush with container for the soap water ejected by a micro pump. A fully functioning prototype was designed, started from choosing all parts needed.
ELECTRIC SHOE BRUSH
An electric shoe brush with container for the soap water ejected by a micro pump. A fully functioning prototype was designed, started from choosing all parts needed.
ELECTRIC SHOE BRUSH
An electric shoe brush with container for the soap water ejected by a micro pump. A fully functioning prototype was designed, started from choosing all parts needed.
ELECTRIC SHOE BRUSH
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
Designed according to the customer's guidelines and general dimensions. 3D model, 2D drawings for manufacturing and renderings.
SPEAKER SYSTEM
The goal was to create a CAD design of an externally mounted motorcycle helmet heads up display (HUD) unit. The HUD will be used for navigation purposes in addition to displaying simple notifications. The image will be created using a miniaturized LCOS projector (just like in google glass). 
Possible to mount on any type of helmet.
Display for a motorcycle helmet
The goal was to create a CAD design of an externally mounted motorcycle helmet heads up display (HUD) unit. The HUD will be used for navigation purposes in addition to displaying simple notifications. The image will be created using a miniaturized LCOS projector (just like in google glass). 
Possible to mount on any type of helmet.
Display for a motorcycle helmet
The goal was to create a CAD design of an externally mounted motorcycle helmet heads up display (HUD) unit. The HUD will be used for navigation purposes in addition to displaying simple notifications. The image will be created using a miniaturized LCOS projector (just like in google glass). 
Possible to mount on any type of helmet.
Display for a motorcycle helmet

Commentaires

Modifications enregistrées
Montre1 - 5 sur 23 commentaires
Filtrer les commentaires par : 5,0
$40,00 USD
Anatolii is a very professional engineer. He have the ability to listen carefully to the requirements, improve it and deliver efficient software.
C Programming Embedded Software Arduino
M
Drapeau de Michel C. @michcf
il y a 7 mois
5,0
$1 275,00 USD
Despite many hurdles, he did a really fantastic job designing exactly what I was looking for. I will definitely hire again
Electrical Engineering Robotics Circuit Design
C
Drapeau de Josh S. @Chirodad
il y a 1 an
5,0
€550,00 EUR
Very good Work.!!!
Arduino German Translator
H
Drapeau de Hubert H. @Hubert81
il y a 1 an
5,0
£2 300,00 GBP
Spot on guy!! He realized immediately what I needed and then led me through technical issues. Very happy with Anatolii, and we'll be doing some more work shortly.
Engineering Mechanical Engineering
Avatar de l'utilisateur
Drapeau de Srdan J. @huis789
il y a 1 an
5,0
$200,00 NZD
Very easy to work with. Got the project finished as desired with very little back and forth.
Matlab and Mathematica Electrical Engineering C++ Programming Mathematics Arduino
Avatar de l'utilisateur
Drapeau de Michael C. @kestrelcad
il y a 2 ans

Éducation

Bachelor\'s Degree

Odessa National Telecommunications Academy, Ukraine 1983 - 1988
(5 ans)

Contactez Anatolii K. concernant votre emploi

Connectez-vous pour discuter des détails via la messagerie.

Vérifications

Freelance préféré
Identité vérifiée
Paiement vérifié
Téléphone vérifié
E-mail vérifié
Connecté à Facebook

Meilleures compétences

3D Modelling 13 Solidworks 12 CAD/CAM 10 3D Animation 8 3D Rendering 7

Parcourir les freelances similaires

3D Modellers in Ukraine
3D Modellers
Solidworks Designers
CAD/CAM Designers

Parcourir les présentations similaires

3D Modelling
Solidworks
CAD/CAM
3D Animation
Utilisateur précédent
Utilisateur suivant
Invitation désormais envoyée !
Utilisateurs enregistrés Total des travaux publiés
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2023 Freelancer Technology Pty Limited (ACN 142 189 759)
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.