Logo Freelancer Comment ça marche Parcourir les emplois
Se connecter S'inscrire
Publier un projet
Photo de couverture du profil
Vous suivez désormais
Erreur de suivi de l'utilisateur.
Cet utilisateur n'utilise pas les utilisateurs à le suivre.
Vous suivez déjà cet utilisateur.
Votre plan d'adhésion ne permet que 0 suivis. Améliorez ici.
Ne suit désormais plus
Erreur lors de l'arrêt du suivi de l'utilisateur.
Vous avez désormais recommandé
Erreur lors de la recommendation de l'utilisateur.
Une erreur a eu lieu. Veuillez rafraîchir la page et réessayer.
E-mail désormais vérifié.
Avatar de l'utilisateur
$20 USD / heure
Drapeau de ALGERIA
alger, algeria
$20 USD / heure
Il est actuellement 8:33 PM ici
Rejoint le mars 15, 2015
1 Recommandation

Sidali H.

@sidou82

 4,7 (10 commentaires)
3,9
3,9
91%
91%
$20 USD / heure
Drapeau de ALGERIA
alger, algeria
$20 USD / heure
100 %
Travaux complétés
100 %
Suivant le budget
100 %
Dans les temps
8 %
Taux de réembauche

Electronics Engineer / Coding

Strong analytical skills with a thorough knowledge of analog and digital electronics, C, C++, VBA and Python coding and SAP ERP business analysis. Eager to support you in electronics, PCB design and business process analysis. Familiar with : - C, C++, VBA, Python, MySQL - Microcontrollers & Arduino Programming - Matlab and Simulink - Power Electronics - SAP SD, MM, PM - Labcenter Proteus - PCB Design
Freelancer Electronics Engineers Algeria
Voir tous les Electronics Engineers en Algeria

Contactez Sidali H. concernant votre travail

Connectez-vous pour discuter de tous les détails via la messagerie.

Portfolio

2849142
This a board using arduino nano to control power meter.
PCB design
2633924
• Implement the Perturb and Observe (P & O) Maximum Power Point Tracking Algorithm in Arduino Uno. • creat the circuit diagram consisting of a 200w solar panel and boost converter circuit.
P&O MPPTracking Algorithm using Arduino Uno
2633901
The goal is to see LED being turned ON as Output. Using HC-04 the default situation is that the UltraSonic sensor is close to the object (with 5cm) and start checking the time right after the object is far away from the UltraSonic sensor(with 10cm) and stop checking the time right after the object is close to the UltraSonic sensor again (with 5mc). The Arduino has to get feedback the timing value on how long did it take. The limitation of timing value is 20seconds. if the value is same to 20 seconds or over, the LED is turned ON. if not, the LED is turned OFF.
UltraSonic_Check_Distance ARDUINO
2255716
In order to extract the maximum amount of from the photovoltaic generator, we propose an intelligent control method for the maximum power point tracking (MPPT) of a photovoltaic system under variable temperature and insulation conditions. This method uses a fuzzy logic controller. As part of our work, we will focus on voltage inverter at three levels to NPC structure. The latter can increase the voltage supplied to the load (network) through their topology. Thus, they can generate more voltage sinusoidal possible and improve the total harmonic distortion through the high voltage levels provided by the structure of this new converter.\\nThe grid interface inverter transfers the energy drawn from the PV module into the grid by keeping common dc voltage constant. The PQ control approach has been presented for the multilevel inverter. The simulation results under Matlab/Simulink show the control performance and dynamic behaviour of grid connected photovoltaic system.
Modeling and simulation of a grid connected PV generator
1874868
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
2255549
The objective was to assess the number of solar panels needed to produce the annual electricity consumption of Al-Shifa Hospital (150 kW / day)
Solar Electric Power System - Al-Shifa Hospital
The objective was to assess the number of solar panels needed to produce the annual electricity consumption of Al-Shifa Hospital (150 kW / day)
Solar Electric Power System - Al-Shifa Hospital
2849142
This a board using arduino nano to control power meter.
PCB design
2633924
• Implement the Perturb and Observe (P & O) Maximum Power Point Tracking Algorithm in Arduino Uno. • creat the circuit diagram consisting of a 200w solar panel and boost converter circuit.
P&O MPPTracking Algorithm using Arduino Uno
2633901
The goal is to see LED being turned ON as Output. Using HC-04 the default situation is that the UltraSonic sensor is close to the object (with 5cm) and start checking the time right after the object is far away from the UltraSonic sensor(with 10cm) and stop checking the time right after the object is close to the UltraSonic sensor again (with 5mc). The Arduino has to get feedback the timing value on how long did it take. The limitation of timing value is 20seconds. if the value is same to 20 seconds or over, the LED is turned ON. if not, the LED is turned OFF.
UltraSonic_Check_Distance ARDUINO
2255716
In order to extract the maximum amount of from the photovoltaic generator, we propose an intelligent control method for the maximum power point tracking (MPPT) of a photovoltaic system under variable temperature and insulation conditions. This method uses a fuzzy logic controller. As part of our work, we will focus on voltage inverter at three levels to NPC structure. The latter can increase the voltage supplied to the load (network) through their topology. Thus, they can generate more voltage sinusoidal possible and improve the total harmonic distortion through the high voltage levels provided by the structure of this new converter.\\nThe grid interface inverter transfers the energy drawn from the PV module into the grid by keeping common dc voltage constant. The PQ control approach has been presented for the multilevel inverter. The simulation results under Matlab/Simulink show the control performance and dynamic behaviour of grid connected photovoltaic system.
Modeling and simulation of a grid connected PV generator
1874868
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
Elaboration of the virtual robot and the establishment of the control of the real robot arm following the steps below :\\n- The modeling of a manipulator arm with five degrees of freedom identical to ROB3i using SolidWorks, and the highlighting of the direct and inverse kinematic model, which represents the control member.\\n- The integration of the robot in a 3D environment using the OpenGL graphics library, programmable user interface and language GLUT DEV C ++ 4.9.9.2 by applying the bright and colors effects.\\n-The Design and implementation of a communication interface between the virtual and real robot and a control board for enslaving the engines of real robot mainly using PIC 16F877 microcontroller and L298 circuit to control arms\\\'s motors.\\n
Study and realization of a virtual robot using OpenGL / C++
2255549
The objective was to assess the number of solar panels needed to produce the annual electricity consumption of Al-Shifa Hospital (150 kW / day)
Solar Electric Power System - Al-Shifa Hospital
The objective was to assess the number of solar panels needed to produce the annual electricity consumption of Al-Shifa Hospital (150 kW / day)
Solar Electric Power System - Al-Shifa Hospital

Commentaires

Modifications enregistrées
Montre1 - 5 sur 11 commentaires
 Filtrer les commentaires par :
5,0
€50,00 EUR
Project for Sidali H.
Good Freelancer. Made great effort to meet our expectations and specific requirements.
Electronics
Matlab and Mathematica
Microcontroller
Electrical Engineering
+1 de plus
A
Drapeau de Aurelien P.
@aurelien2
•
il y a 7 ans
5,0
$55,00 USD
create a model in simulink
excellent job
Matlab and Mathematica
Electrical Engineering
M
Closed User
@mulayrutuja1
•
il y a 7 ans
5,0
$60,00 USD
Project for sidou82 -- 2
good work within budget and time! Looking forward to work again.
Electronics
Matlab and Mathematica
Microcontroller
Electrical Engineering
+1 de plus
Avatar de l'utilisateur
Drapeau de Prem G.
@gurbani
•
il y a 8 ans
4,6
£60,00 GBP
Project 10239723 has been deleted
Really nice person to work with. Would definitely hire again
Avatar de l'utilisateur
Drapeau de Hassan S.
@hassanshah1991
•
il y a 8 ans
5,0
$110,00 USD
nano v3 board project
excellent freelancer will hire him again
Electronics
Microcontroller
PCB Layout
Arduino
Circuit Design
S
Drapeau de Victor M.
@salemend
•
il y a 8 ans

Expérience

Measurements Engineer

Freelancer
sept. 2007 - Jusqu'à présent
- Instrumentation Engineering - Analog & Digital Electronics design - PCB design - SAP S/4 HANA - Microcontrollers and Arduino programming - Flow meters sizing (Orifice, Ultrasonic, Turbine) - Instrument Installation, testing, Pre-Commissioning, and Commissioning - Calculation of Control valves sizing and noise - Calculation of Relief valves sizing and noise

Éducation

Master's degree in Electronics

Université des Sciences et de la Technologie 'Houari Boumediène', Algeria 2002 - 2007
(5 ans)

Qualifications

SAP PM Configuration

SAP
2018
Blueprint, Tests, configuration

Fiscal Metering Systems

DNV-GL
2014
Training courses on fiscal metering of natural gas

Information Systems Project Management

Veil-Tech
2009
Management of projects of information systems

Contactez Sidali H. concernant votre travail

Connectez-vous pour discuter de tous les détails via la messagerie.

Vérifications

Freelance préféré
Identité vérifiée
Paiement vérifié
Téléphone vérifié
E-mail vérifié
Connecté à Facebook

Meilleures compétences

Electronics 8
Matlab and Mathematica 6
Microcontroller 6
Electrical Engineering 6
Circuit Design 5

Parcourir les freelances similaires

Electronics Engineers in Algeria
Electronics Engineers
Matlab and Mathematica Engineers
Microcontroller Developers

Parcourir les présentations similaires

Electronics
Matlab and Mathematica
Microcontroller
Electrical Engineering
Utilisateur précédent Utilisateur suivant
Invitation désormais envoyée !
Merci ! Nous vous avons envoyé un lien par e-mail afin de réclamer votre crédit gratuit.
Une erreur a eu lieu lors de l'envoi de votre e-mail. Veuillez réessayer.
Logo Freelancer France / Français Aide & Assistance FreelanceCatégoriesProjetsConcours FreelancesEntrepriseAdhésionProgramme de Freelance PréféréGestion de projetEmplois locauxPhoto AnywherePrésentationAPI pour les développeursDevenez VérifiéApplication Desktop À proposÀ propos de nousComment cela fonctionneSécuritéInvestisseurPlan du siteHistoiresNouveautésÉquipeRécompensesCommuniqué de presseOffres d'emploi TermesPolitique de ConfidentialitéTermes et ConditionsPolitique de CopyrightCode de conduiteFrais et chargesPartenairesEscrow.comLoadshiftWarrior Forum ApplicationsLogo d'Apple App StoreLogo Google play
Échec de copie dans le presse-papier, veuillez réessayer après avoir ajuster vos permissions.
Copié dans le presse-papier.
Utilisateurs enregistrés Total des travaux publiés
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.