Logo Freelancer Comment ça marche Parcourir les emplois
Se connecter S'inscrire
Publier un projet
Photo de couverture du profil
Vous suivez désormais
Erreur de suivi de l'utilisateur.
Cet utilisateur n'utilise pas les utilisateurs à le suivre.
Vous suivez déjà cet utilisateur.
Votre plan d'adhésion ne permet que 0 suivis. Améliorez ici.
Ne suit désormais plus
Erreur lors de l'arrêt du suivi de l'utilisateur.
Vous avez désormais recommandé
Erreur lors de la recommendation de l'utilisateur.
Une erreur a eu lieu. Veuillez rafraîchir la page et réessayer.
E-mail désormais vérifié.
Avatar de l'utilisateur
$10 USD / heure
Drapeau de KENYA
nairobi, kenya
$10 USD / heure
Il est actuellement 10:55 PM ici
Rejoint le août 17, 2018
0 Recommandations

Morris K.

@automorris

 0,0 (0 commentaires)
0,0
0,0
0%
0%
$10 USD / heure
Drapeau de KENYA
nairobi, kenya
$10 USD / heure
N/A
Travaux complétés
N/A
Suivant le budget
N/A
Dans les temps
N/A
Taux de réembauche

Mechatronics Design Engineer

Am a Solidworks designer and Solidcam CNC programmer. My scope of work is on CAD design, FEA analysis and CNC programming. 3 years of experience in designing customers products. My main aim is to offer the best design solutions to various engineering problems. Looking forward to work on challenging design problems.
Freelancer Engineers Kenya
Voir tous les Engineers en Kenya

Contactez Morris K. concernant votre travail

Connectez-vous pour discuter de tous les détails via la messagerie.

Portfolio

9389303
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
9389155
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
9157556
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
9057919
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
8791006
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
9041090
This is a five cylinder intake manifold having five runners. The design idea is such that the runners, the plenum are separate entities thus easier to machine. The plenum has two sections, the upper and the lower. The runners have incorporated fuel injector ports for a better design. The intake manifold is suitable to any throttle body the client has. Depending on the throttle body,an additional spacer plate can be machined to couple the intake manifold and the throttle body
Intake Manifold
9389303
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
9389155
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
9157556
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
9057919
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
8791006
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
9041090
This is a five cylinder intake manifold having five runners. The design idea is such that the runners, the plenum are separate entities thus easier to machine. The plenum has two sections, the upper and the lower. The runners have incorporated fuel injector ports for a better design. The intake manifold is suitable to any throttle body the client has. Depending on the throttle body,an additional spacer plate can be machined to couple the intake manifold and the throttle body
Intake Manifold

Commentaires

Modifications enregistrées
Aucun commentaire visible ici !

Expérience

CAD Designer & CNC Machinist

Kens Metal
févr. 2022 - sept. 2022 (7 mois, 3 jours)
My role here included designing customer's designs, nesting the drawings for laser cutting and cnc water jet cutting. I also did the actual cutting on either the fiber laser cnc machine or water jet cnc machine

Éducation

Bachelors Degree Mechatronics Engineering

Jomo Kenyatta University of Agriculture and Technology, Kenya 2016 - 2021
(5 ans)

Qualifications

Bachelors Degree in Mechatronics Engineering

Jomo Kenyatta University of Science and Technology
2016
Graduated with a second class lower division. I worked on several projects while at school which helped me build up my skills in CAD design.

Contactez Morris K. concernant votre travail

Connectez-vous pour discuter de tous les détails via la messagerie.

Vérifications

Freelance préféré
Identité vérifiée
Paiement vérifié
Téléphone vérifié
E-mail vérifié
Connecté à Facebook

Meilleures compétences

Engineering
CAD/CAM
Manufacturing
3D Rendering
Solidworks

Parcourir les freelances similaires

Engineers in Kenya
Engineers
CAD/CAM Designers
Manufacturing Experts

Parcourir les présentations similaires

Engineering
CAD/CAM
Manufacturing
3D Rendering
Utilisateur précédent Utilisateur suivant
Invitation désormais envoyée !
Merci ! Nous vous avons envoyé un lien par e-mail afin de réclamer votre crédit gratuit.
Une erreur a eu lieu lors de l'envoi de votre e-mail. Veuillez réessayer.
Logo Freelancer France / Français Aide & Assistance FreelanceCatégoriesProjetsConcours FreelancesEntrepriseAdhésionProgramme de Freelance PréféréGestion de projetEmplois locauxPhoto AnywherePrésentationAPI pour les développeursDevenez VérifiéApplication Desktop À proposÀ propos de nousComment cela fonctionneSécuritéInvestisseurPlan du siteHistoiresNouveautésÉquipeRécompensesCommuniqué de presseOffres d'emploi TermesPolitique de ConfidentialitéTermes et ConditionsPolitique de CopyrightCode de conduiteFrais et chargesPartenairesEscrow.comLoadshiftWarrior Forum ApplicationsLogo d'Apple App StoreLogo Google play
Échec de copie dans le presse-papier, veuillez réessayer après avoir ajuster vos permissions.
Copié dans le presse-papier.
Utilisateurs enregistrés Total des travaux publiés
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.