Logo FreelancerComment cela fonctionneParcourir les emplois Se connecter S'inscrire Publier un projetProfile cover photoundefined
Vous suivez désormais .
Erreur de suivi de l'utilisateur.
Cet utilisateur n'utilise pas les utilisateurs à le suivre.
Vous suivez déjà cet utilisateur.
Votre plan d'adhésion ne permet que 0 suivis. Améliorez ici.
L'utilisateur n'est désormais plus suivi.
Erreur lors de l'arrêt du suivi de l'utilisateur.
Vous avez désormais recommandé
Erreur lors de la recommendation de l'utilisateur.
Une erreur a eu lieu. Veuillez rafraîchir la page et réessayer.
E-mail désormais vérifié.
Avatar de l'utilisateur
$60 USD / heure
Drapeau de TURKEY
bursa, turkey
$60 USD / heure
Il est actuellement 11:40 AM ici
Membre depuis le septembre 29, 2017
0 Recommandations

Bahtiyar B.

@ElektroNeo

monthly-level-four.svgverified.svg
5,0 (4 commentaires)
4,8
4,8
$60 USD / heure
Drapeau de TURKEY
bursa, turkey
$60 USD / heure
100 %
Travaux complétés
100 %
Suivant le budget
100 %
Dans les temps
N/A
Taux de réembauche

Embedded System Developer | PCB Designer

Hi. I am an Electronics Engineer with +5 years of experience in Embedded Firmware and Embedded Systems. ✔ I know C/C++ programming language especially for embedded firmware. ✔ I can make PCB designs with KiCAD, Eagle, Proteus, EasyEDA and Altium Designer. ✔ I can make a project with STM32, PIC12/16/18/24, ESP32, ESP8266, RP2040 and Atmel Microcontrollers. ✔ I can make simulations with LTspice, Logisim Evolution and Proteus. ✔ I can make GUI with a Nextion or .NET Framework, ✔ I can rapidly prototype your embedded system. ✔ I can do Arduino programming. ✔ I used these things in my previous projects: UART, I2C, SPI, DMA, ADC, DAC, PWM, EEPROM, MPU6050, BMP180/280, ADXL345, HC-SR04, Joystick, L86 GPS, 7SD, Nokia 5110 Display, LCD Display, Nextion Display, DS1307+, RS485, PCA9685 PWM Module, BLDC Motor Control, BNO055 MPU, Step Motor Control, Servo Motor Control, NRF24L01, NTC Thermistor, HX711 Load Cell.
Freelancer Electronics Engineers Turkey

Contactez Bahtiyar B. concernant votre emploi

Connectez-vous pour discuter des détails via la messagerie.

Éléments du portfolio

In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
I designed and send my designs to production. And after production my module worked fine.
5V, 3.3V and 1.8V Breadboard Power Supply

Commentaires

Modifications enregistrées
Montre1 - 4 sur 4 commentaires
Filtrer les commentaires par : 5,0
$80,00 USD
Great job. Nice to work with you.
Electronics Microcontroller Electrical Engineering PCB Layout Arduino
Avatar de l'utilisateur
Drapeau de Madaco M. @madasl
il y a 3 mois
5,0
$3 550,00 AUD
Was fantastic, will ask him to work on our next project
Electronics Microcontroller Software Architecture Electrical Engineering PCB Layout
+4 de plus
Avatar de l'utilisateur
Drapeau de Craig L. @kiwioz
il y a 1 an
5,0
$60,00 USD
quality of work amazing. fast and very professional
Microcontroller Embedded Software
V
Drapeau de Vidal M. @vmoya02
il y a 2 ans
5,0
$25,00 USD
he submitted the project before the due time .. it was perfectly completed and I am satisfied .. hire him without any hesitation :)
Electronics Electrical Engineering Circuit Design Circuit Board Layout Flex Circuit Design
Avatar de l'utilisateur
Drapeau de Z A. @zulfaaldhuhli
il y a 2 ans

Éducation

Bachelor Degree

Bursa Technical University, Turkey 2016 - 2022
(6 ans)

Qualifications

Professional Certificate

ICAT'20 (International Conference on Advanced Technologies)
2020
I did "Adjustable Neural Stimulator System with Android Application" project.

Scientific Computing with Python

freeCodeCamp
2020
Verify: https://www.freecodecamp.org/certification/elektroneo/scientific-computing-with-python-v7

Contactez Bahtiyar B. concernant votre emploi

Connectez-vous pour discuter des détails via la messagerie.

Vérifications

Freelance préféré
Identité vérifiée
Paiement vérifié
Téléphone vérifié
E-mail vérifié
Connecté à Facebook

Certifications

preferredfreelancer-1.png Preferred Freelancer Program SLA 1 94%

Meilleures compétences

Electronics 3 Microcontroller 3 PCB Layout 2 Arduino 1 Circuit Design 1

Parcourir les freelances similaires

Electronics Engineers in Turkey
Electronics Engineers
Microcontroller Developers
PCB Layout Designers

Parcourir les présentations similaires

Electronics
Microcontroller
PCB Layout
Arduino
Utilisateur précédent
Utilisateur suivant
Invitation désormais envoyée !
Utilisateurs enregistrés Total des travaux publiés
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2023 Freelancer Technology Pty Limited (ACN 142 189 759)
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.