Design and program a a versatile digital VU meter using a 1.5" oled display -- 2
£750-1500 GBP
Paiement à la livraison
would like to use a RGB OLED, 1.5inch diagonal, 128x128 pixels, 16-bit colour oled display with embedded controller, communicating via SPI interface. You'll need to design a simple processor board to interface to the display and code it to have a graphical display to look like a standard analogue audio VU meter. The design must be able to display 2 x 3 different audio inputs (1: input level, 2: Output level, 3: Gain reduction....This would need to be x2 for Left and Right channels. (so a total of 6 possible audio sources) and be able to switch between them and display the level correctly and show which input it is displaying. The user needs to be able to select a single channel (L or R), then the source (1, 2 or 3), and a meter type (Bar or analogue) then display that "full screen", OR select both channels and display any combination of meter and input, but both displayed at the same time. EG: L channel, VU meter, analogue meter, input 1 (on left or at top of display, wherever it fits best), AND R channel, Gain reduction, Bar graph display, input 3 (on right of display or bottom...as appropriate). The meters must have the same ballistic characteristics of a standard analogue audio VU meter. Accuracy is a MUST. Colours should be used intelligently and should have a good resolution. The display may be used in either a Mono channel unit or a stereo channel unit, so there would need to be a hardware link on the board to tell the processor to always use the full display in a mono unit (so second channel selection Etc is disabled), or split the display intelligently for a stereo unit (showing which channel is which) and enable the second set of 3 inputs (and be able to switch modes independently on Left and Right channels). Expected display to be used is something similar to this: https://www.amazon.co.uk/Waveshare-1-5inch-RGB-OLED-Module/dp/B07DB5YFGW/ref=sr_1_1?dchild=1&keywords=Waveshare+1.5inch+RGB+OLED+Display+Module+128x128+Pixels+16-bit+High+Color+SPI+Interface&qid=1626291291&s=computers&sr=1-1
The display will also need the ability to display Eq response curves/spectrum analyser.
Development hardware will be supplied at my cost.
You can supply schematics for the prototype processor board and I would layout the PCB and have them fabricated and then sent to you for prototyping/code testing Etc.
I would prefer to use either a PIC processor or a Silicon Labs MCU
Nº du projet : #31918823
À propos du projet
Décerné à:
Thanks for Freelancer which gives chance to meet you. I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renew Plus
19 freelances font une offre moyenne de 1132 £ pour ce travail
Hi, I have almost 13 years of experience. I have read the details and have a few questions. Please get back to me to discuss it further. Thank You.
Hello there, I have experience in designing electronics circuits and can make your project. I can also develop hardware compatible android apps and will provide you all the design for your product including schematic, Plus
Hello How are you? Thanks for your posting job. I have read your project requirements and I am 100% sure I can complete your project perfectly. ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ ⭐ I have 15 years experience in Circuit & PC Plus
Hi I can design only Simple Prototype Processor Board with schematic using " 1.5" RGB OLED Display" "Analogue and digital VU meter for communicating via SPI interface. I have seen the link and attached documents you s Plus
Hello, thank you for your job posting. I have 5 years experience in PCB and circuit design and Manufacturing, Embedded programming, and i can help you with any kind of request in these fields. I will do my best to sati Plus
HELLO DEAR EMPLOYER, First receive warm greetings, and hoping you are good, i welcome you to TOP GRADE SERVICES LTD, the home of Amazing services and quality. EXPERT IN NAMED SKILLS, OVER 18 YEARS OF EXPERIENCE, After Plus
Main specialization: * developing Windows Desktop and Web solutions (mainly using C, C++, C#, ASP.NET) * converting/translating/porting code from one programming language to another programming language. * writing wrap Plus
