Bethanie Fire Tanks

$250-750 AUD

Complété

Publié

il y a plus de 3 ans

$250-750 AUD

Payé lors de la livraison

Need Finite element Von Mises Stress analysis to be carried out on bolted panel tank. 3D DWG model attached. Poissons Ration 0.3, 2.9mm thick Panel Material Density 7860kG/M3, Liquid density 1000kG/M3, depth of liquid 2300mm. Assume base of tank fixed to concrete floor. Allowable material stress 247.50 MPa. Liquid can be full in both partitions (case 1) or empty left side (case 2) or empty right side (case 3). No wind loads or earthquake loads to be considered. Roof is solid 2.0mm steel panel bolted all round to walls. Joints between panels are bolted at 75mm centres. Horizontal Stiffener braces at two heights bolted to panels joints and centre of panel. Pairs of M16 horizontal all-thread tie rods at one level through tank. Bottom corners of panels stiffened with 2.00mm corner stiffening brackets. External corners of panels bolted together with 2.90mm corner angles 100x100x2.9mm Each case need stress distribution and deflections.

3D Modelling

Mechanical Engineering

Structural Engineering

AutoCAD

N° de projet : 28075794

Concernant le projet

12 propositions

Projet à distance

Actif à il y a 3 ans

Cherchez-vous à gagner de l'argent ?

Adresse e-mail

Avantages de faire une offre sur Freelancer

Fixez votre budget et vos délais

Soyez payé pour votre travail

Surlignez votre proposition

Il est gratuit de s'inscrire et de faire des offres sur des travaux

Décerné à :

@gophaneishwar7

Hi, My name is Ishwar, I am a Mechanical Engineer with many years of experience using FEA and CAD tools. I can do the FEA analysis of the tank. I have done similar analysis. Please open a chat so that we can discuss it more. I will do my best to complete your project perfectly with high responsibility and passion. You will get wonderful results. Thanks in advance, Ishwar

$250 AUD en 7 jours

4,9

(47 commentaires)

5,1

12 freelances proposent en moyenne $466 AUD pour ce travail

@totoco87

hi how are you? i am mechanical designer i have experience 3d design and 2d shop drawing i can make FEA analys this work need make 3d files and make FEA the final file send you stress distribution and deflections. please write for me i can start work now and send you when i finish thank you

$500 AUD en 3 jours

4,8

(163 commentaires)

6,5

@saied2017

Hello I’m mohamed saeed Mechanical engineer with high experience in finite element analysis based stress ,displacement analysis I have checked your job description and ready to help you in your project

$889 AUD en 2 jours

4,8

(48 commentaires)

5,9

@struct2019

I'm Professional Civil/Structural Engineer with 20yrs of experience as Structural Engineer,Consultant and Estimation ,I can delivered the project on time,econimical result within the budget. I can start the project right now ,considered your Project with highest quality once rewarded. Please leave a message so we can discuss the deadline and budget of the project.

$600 AUD en 7 jours

5,0

(12 commentaires)

5,2

@baselbasel07

I have a Phd in structural engineering and I have a big experience in finite element analysis using ansys apdl. I can make ultimate load analysis for ur tank and give you von mises stresses and factor of safety

$389 AUD en 4 jours

4,7

(4 commentaires)

4,5

@granimal

Hi, My name is Saurabh and i am an expert in 3D Modeling, 3D Rendering, Rigging, Interior designing. I have checked your requirements about 3D Bethanie Fire Tanks DESIGN and ready to start the work . I will Provide you Best quality work with Great Options in Fair price and less time depending on the complexity of your design. I look forward to a successful working relationship in the future. please check out the link below for some of my work- https://www.freelancer.in/u/granimal?w=f And let's chat to discuss it further and I will be able to show you more work samples Best regards, Saurabh Tripathi

$250 AUD en 2 jours

3,6

(12 commentaires)

4,2

@Semah06

Hey, I'm an Architect and Structural Engineer and I will do exactly what you are looking for in your Bethanie Fire tank based on your requirements. I have done similar work recently and I will provide eyes catching and professional Drawings for you. charges is $444.... Looking forward...Thanks https://www.freelancer.com/u/Semah06?page=portfolio&w=f&ngsw-bypass= ..Looking forward...Thanks

$444 AUD en 5 jours

4,2

(4 commentaires)

3,3

@Usama9806

Hello, I am Muhammad Usama. We are team of Expert Engineers. I can definitely do your task within a limited time period. Kindly share quick details and feel free to contact me. Thank you

$667 AUD en 8 jours

5,0

(1 commentaire)

1,0

@Yasela

Hi, I am qualified chartered Structural Engineer ( EC, UK) with 16+ years experience. I have done similar projects before . 1. Circular steel Tank, with STADD PRO. 2. Cuboid steel tank ( bentonite mixing tank for pile construction) using STADD PRO Your descriptions are very clear , can commence the work with either SAP2000, STAD PRo or MIDAS. The different load cases ( fully filled- both tanks/ single tank) can be incorporated along with required load combinations. Hope you are required to find the SLS stresses / deflections conjunction to AS standards. Does roof plate have surcharge load on top? Very much interested with the project.

$250 AUD en 2 jours