Fermé

Locate Contract Manufacturer of Custom Sized Wooden Blocks

Help find a willing and able wood workshop (a contract manufacturer) to produce/make simple finished wooden blocks in quantities of 10,000 units, and ship to USA. Starting order will likely be 40,000 units. The hope is to double the order quantity after a short time, then double again once finished product (using these blocks) demand is established.

I would like to find a contract manufacturer, anywhere in the world, that can affordably make finished wooden blocks using Hardwoods; Cypress, Acacia, Shorea (aka: Maranti, Lauan, Balau, Phillipine Mahogany), Ipe, Mahogany, Teak or hardwoods, not softwoods, depending on what wood source is available locally for the manufacturer. Wood variety/varieties must withstand outdoor heat, cold, and humid air, rain and moisture from environment well.

I have attached photos of similarly finished blocks for reference only. They are not my product photos. The photos do not show the proper sized blocks needed. But the finish of these blocks is close to what I am seeking.

1. The wooden blocks we are looking to have manufactured will have measurements approximately as shown in the list below, depending on the efficient use/utilization of the wood supply:

Approximate wooden block sizes needed. It is possible that other sizes might be desired also.

- 20mm x 20mm x 100mm Long

- 20mm x 40mm x 100mm Long

- 20mm x 20mm x 100mm Long

- 20mm x 40mm x 150mm Long

- 20mm Diameter Round x 40mm Long

2. The rectangular blocks will require 2 holes to be drilled into them of approximately 2.5mm to 3mm. The holes will be drilled through the 20mm or 40mm lengths. The round rod will have 1 hole drilled.

3. The block surfaces will be smoothly finished (fine sanded) so wood is not rough to the touch of skin.

4. If oil or sealant can be applied in their shops, we would like to know what chemicals they can apply to the blocks.

I have high quality 3D and 2D renderings being prepared and are nearly compete. This will allow for clear communication and reference by all parties/people.

I expect the cost per unit of the largest size listed would be less than $.10 USD per unit (10 cents per piece) delivered cost to USA or (1/10th of a $USD) depending on quality of materials and workmanship. Smaller pieces would be somewhat less because of material cost.

When you find a shop that is willing and able to produce these wooden blocks, within my reasonable per unit estimate and quality expectations above, you will have been completely successful! If you are able to find a manufacturer that can produce the blocks at a higher rate, please feel free to contact me about it as it may be acceptable depending on other factors, like what the wood species is, quality of workmanship, other services offered etc…

Please send photos of wood work produced by the contract manufacturer at their production facility. Or feel free to ask questions to me or submit photos anytime for review.

Compétences : Entrepreneuriat, Industrie Manufacturière, Approvisionnement de Produits, Sourcing Fournisseur, Assistant Virtuel

en voir plus : cnc wood manufacturing, wood manufacturing company near me, custom wood manufacturing, contract manufacturing wood products, wood manufacturing near me, finding a manufacturer to make your product, custom wood components, custom size butcher block countertop, custom computer creator oscommerce help, magento custom sized products module, help contain reduce operation cost clients, contract template custom software, supplement contract manufacturer singapore, contract manufacturer supplements zealand, manufacturer custom tailor, magento manufacturer custom grid, herbal supplements contract manufacturer singapore, vegicaps contract manufacturer, health supplement contract manufacturer, contract manufacturer importer

Concernant l'employeur :
( 6 commentaires ) Riverside, United States

Nº du projet : #18540224

27 freelance font une offre moyenne de $167 pour ce travail

milesf01

Hi, I can help you to get it manufactured. I'm  here from xiamen, China.  thanks! help customer from design, prototype, manufacture, QC, shipping. Looking forward to working with you. Regards, Miles

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(17 Commentaires)
6.0
MImranjavid

Hello, I am very interested in your posted project. I am expert in manufacturing researching, marketing research, product sourcing, product designers and suppliers. I can find all the suppliers that you need and they w Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(26 Commentaires)
5.6
pongku7

Hello, I have connections and I would surely be able to assist you with Locating high quality Contract Manufacturer of Custom Sized Wooden Blocks that are capable of produccing the item as per your requirements. Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(81 Commentaires)
5.7
RSUKANTA2014

Hello sir, I understand what you are looking for. I am from India and able to make those blocks locally and able to send you through courier service but I am not sure if custom duty applicable on it or not. Please sen Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(23 Commentaires)
4.2
Stefanie2000

Hi, I can help you to find a suitable manufacturer of wooden blocks according to your requirements. I had worked for many years as as a Commercial Director of manufacturing and trading companies and I was especially s Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(1 Évaluation)
3.2
natalka503

Hello, I have big experience in that kind of projects and I would really like to help you. Please contact me on chat to discuss details. Greetings, Natalie

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(1 Évaluation)
2.0
omi5439

I will try to get it done I am from India. Please contact me over the skype or email to discuss more. Or send me the request over the freelance chat.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
aditya099

Hi, Thanks for such a detailed explanation for your requirement. I have extensive experience in product development, component sourcing, supplier management. I can help you find multiple vendors with competitive pric Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(0 Commentaires)
0.0
chenshen1996

Our company is called " Empire CTA", CTA means China to American. Our company set up in U.S. We want to be a supplier to other company, we have factory in China, And we can help the company who has product to produce t Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
RomainBG

Hello, I am based in Bulgaria for 7 years, in a region with a lot of wood industries. Bulgaria is close western Europe and middle east which make it a great place for a lot of wood varieties. I will glad to help Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)
0.0
simburutama

We are a professional 3D design company who can build any kind of 3D model for the various application. We also a 3D printing service company that can create a prototype product. In addition, we are a carpenter from Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(0 Commentaires)
0.0
ronibd00

Hi, I need more information and discussion with you. In Bangladesh, here have Mahogony and few others too. I need to talk with you. Pls send a message to connect with you. My name is Mohammad. I am skilled and experi Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(0 Commentaires)
0.0
khanyasir338

dear sir, we are manufacturer of all kinds of wooden articles from [login to view URL] you are interested to deal with us,then you can send us images of the required block on 8266835879 (whats app) thank you Relevant Skills and Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(0 Commentaires)
0.0
rajbatra4

Wonderful assignment. We are located in Yamuna Nagar( Haryana) -India and our city if hub of teak wood blocks and contract workshop are in plenty. However it will be a task to locate the who can give and finish as desi Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
manojnimesh

I have many Custom Sized Wooden Blocks manufacturers in my contact in India who are highly skilled & deliver at low cost with superior quality on time. It will be highly cheaper than any other country. Quality wi Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(0 Commentaires)
0.0
sudheer1993reddy

Dear Fellow Entrepreneur, We have wood working floor shop in India. But here based on cubic feet wood material we buy and do wood works based on dimensions. But per unit cost is not $0.1 . Wood material cost is more ba Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(0 Commentaires)
0.0
FaizaShabbir27

I have been working on Web Development since 2012 and have worked with wide variety of systems. I build custom back-end and front-end solutions as your provided mark-up to life on the web. I love to provide high qualit Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
meenajaideepmukh

Hello I read the job description and can help you to find the manufacturers. I have got expertise in web research. Hope to hear from you soon.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)
0.0
Gsgamet

hi! I'm from Philippines, i think i can help you find what you're looking for. here in the Philippines there's wide variety of wood and one of my neighbor was into wood works. i am also part of UPS courier, I might hel Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
MarinaMartini

Hello, I am bidding not to lose your trail. Will retract if not successful, should find out by noon tomorrow (EST). Cheers, Marina

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0