Fermé

design a 3d printing mechanism , 6k press and a rocket (fea/cfd/animation)

do 3 projects:

https://www.freelancer.com/projects/threed-modelling/design-printing-mechanism-according/details

https://www.freelancer.com/projects/autocad/juice-press-bar-with-fea/details

https://www.freelancer.com/projects/microsoft-dynamics/cfd-analysis-accelerated-projectile/details

$/miletone tbd

Milestones rocket, horizontal flight msl standard day

milestone1: 50$

create any rocket and fin-form form you want, od 4mm, length 60mm. show the "coanda" effect at different velocities (0-M3), show and measure the vector force pressing perpendicularly inwards, optimize the rocket´s round end in order to reach highest vector force over velocity range.

milestone2: 50$

show how this effect can be locally disturbed by what forces applied to the rounded region in order to let laminar flow stall. think of a foil with a rough surface (range 0-50µm of ie bubbles) that you glue to that region. Eliminate as much as possible the “sucking” effect. Show best roughness geometry.

milestone3: 50$

create a thrust that propels the rocket to M2.5-3 within ideally 20m. show energy used on 0-100m, acceleration chart and thrust and drag and weight chart. Use any useful powder and metal, that s not important. What I need is a realistic thrust with a realistic cone geometry.

milestone4: 50$

show how the thrust jet is influenced/squeezed by the orthogonal pressure vector caused by the coanda effect and released w/o coanda effect. If the rough stall producing foil would be just half around the rocket s end: what would be the turn rate? Optimize the fins to produce highest and lowest turn rate.

Milestones press

Design hpp press and fea and cfd and animation

Milestone5, 50$

Design the water cylinder id66 od maybe 150mm, take a 200ton jack , piston with 20 steel rings from combustion engines, piston stroke500mm, and oil pump and push the piston to produce 6000bar, make fea and cfd and animation.

Milestone6, 50$

Put water cylinder onto 4m tube with traveler (chamber divider with seals like o-rings), design c flanges and caps and 2 valves on each side, let water flow in when juice already fills the whole tube volume, press juice to 6000bar, make fea and cfd and animation.

Milestone7, 50$

Put components around press like air pressure with 4 cylinders controlling the valves, design valves with sealing, choose cylinders: sucking juice and pressing into tube and the one pressing juice out with 10L of water, show interface to bottling station (no oxygen, all ss304 tubes), show system cleaning with water, make fea and cfd and animation.

Milestone8, 50$

I send you links of all machines (washer, mincer, grinder, bottler, power units and cooler) and you integrate them into container. Make film of transparent container showing the whole system.

Milestone9, 50$

2 more tube versions, all 4m, but id 150 and 300mm. make fea and cfd and animation.

Milestones printer

Milestone10, 50$

Design a51 hp cartridge and attached container, with motored roller distributing each single height layer of metal up to 200°C, choose materials, do fea and cfd and animation (solidworks composer and material motion)

Milestone11, 50$

Design carousel, comprised of ca 30 cartridges, with different speeds, verify/correct speeds, basis is 0.5m/s printing speed, show cfd of thermal behavior in cartridge and printed layers, optimize layer by printed mass and nano particle size.

Milestone12, 50$

Design (preheating) hopper system for different materials (ceramics/different metals/plastics pa66/11/12), animation, cfd for all materials.

Milestone13, 50$

Grow system to 10 cartridges per row, animation

Compétences : Solidworks, Ingénierie, Génie Mécanique, Ingénierie Aéronautique, Ingénierie Aérospatiale

en voir plus : freelance industrial designer rendering 3d printing cad architecture interior design exhibition, iş ilanları design for 3d printing graphic photoshop izmir, 3d printing design, 3d printing design competition, 3d printing design outsourcing, 3d printing design software, 3d printing service and design balwyn services for hire other business services, design software for 3d printing canadian products only, design the enclosure product prototype 3d printing, freelance design for 3d printing, outsourced 3d design and printing, 3d model design for 3d printing, design and production of 3d printing positioning stage, design, 3D printing, logo design 3d printing, 3d printing in product design, how to design parts for 3d printing, how to design 3d models for printing, product design 3d printing, graphic design 3d printing

Concernant l'employeur :
( 1 commentaire ) neuss, France

Nº du projet : #21911443

13 freelance font une offre moyenne de $1068 pour ce travail

Yohanesujang

Hi, I'm Ujang from Indonesia. I'm an RnD mechanical engineer/Product Designer. I'm not only making the design, but I know that my design is manufacture-able because I have many experiences on Manufacture: CNC milling, Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(28 Commentaires)
6.5
thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic p Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 20 jours
(17 Commentaires)
5.2
designbyatin

Hi, I'm seriously looking to work for your projects and I'm capable to work and deliver all of these projects, but my charges would be on an hourly basis 20 USD per hour. I've 10years of experience and extensive knowle Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(30 Commentaires)
4.7
ENG1mga

Hi there! I am ready for all I am a SolidWorks expert, product designer, and mechanical engineer. I checked your job carefully and I am so interested in your job. I have many experiences in your project's field. I'm su Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(54 Commentaires)
4.6
arkitekFRIDAY

Note: Please Click “HIRE ME” then simply leave a simple message like “HI THERE” . We will respond quickly as possible. Good Day! We are a team of Architects, Engineers, Artists, and Animators here. I am an Archite Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(4 Commentaires)
3.1
willson112203

Hi Thank you for your job posting. I am very interest in your project. and a mechanical engineer. I also develop numerous co-designs and new products and complete 3D designs. So I have full experience Solidwork, Ans Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(1 Évaluation)
2.8
cchcch921

I'm mechanical engineering expert and have a lot of experience in the CFD analysis and FEA using Ansys. Of course, I have many experienced in CAD (solidworks), design, motion, simulation. I' m sure I can complete yo Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(6 Commentaires)
2.4
Natty2019

Hello, i am Mechanical engineer, Bsc in thermal engineering Msc in design engineering, im expert Mathematical modeling, expert in Mechanical system analysis system modeling , experimenting including software modeling a Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(3 Commentaires)
1.5
%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 30 jours
(0 Commentaires)
0.0
khedr98

Hello there, I am a cad designer using solidworks and mechanical engineer, I am ready to work with you on your project, I have an experience in this field, I can do it with high quilty,little time and 100 %satisfaction Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
Nyean

Hi, Good day, This is NK, writing this proposal to inquire about the exciting freelance opportunity. I can deliver you quality works at affordable costs. Please let me handle this project to get a positive outcome. S Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(1 Évaluation)
0.1
Ajaypv94

I am a mechanical engineer having experience in structural analysis and modelling in solidworks

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 20 jours
(0 Commentaires)
0.0
MTdes

Hello, I'm a Mechatronics Engineer with machine design experience and specialized in CAD/CAM services. I can do your job in minimal time and good efficiency. Thank you and hope to hear from you soon

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)
0.0