Metal Garage Drawer System Prototype

@Ekarthaan

Hi eliteremoval, Last week I built a very similar ceiling‑mounted, gas‑assisted pull‑down storage prototype, so I’m confident I can handle this really well. Your goal is clear: a robust metal system that lowers 27–31 gal totes smoothly, looks clean, and survives heavy garage use. I’ll design a welded steel/alum frame with a parallel‑linkage lift, dual gas struts, sealed bushings, and a positive safety latch. Modular rails will fit common tote rims so sizes stay flexible. i would like to know the below. - What ceiling structure will we mount to (joist size, spacing, allowable load per anchor) and the target safety factor (e.g., 3x or 4x over 150 lb)? - Is one‑hand operation required, and what max pull force is acceptable (e.g., ≤15–20 lbf), given the gas‑assist? I think we should. - Add an over‑center latch plus secondary tether; this boosts safety and reliability if a strut ever fails. - Use powder‑coated steel with stainless fasteners; better corrosion resistance in a garage enviroment and longer life. Lets follow a plan like this. - I map loads and motion: calculate moments, select strut force/rod travel for 36–42" drop, confirm hinge geometry. - I model CAD: frame, linkage, tote interface, stops, and latch; check clearances at 48x30x20 in closed. - I run FEA on brackets and anchors; iterate until deflection and strenght meet margin

@engartdesigninfo

Hello, we have reviewed your project. Together with my team, we can assist you in every way in terms of architecture. From architectural technical drawings to ultra-realistic 3D photos. We have provided remote support to many offices abroad and we continue to work with them, in this sense, we have important references especially from America and Germany. In addition, with our engineering capabilities, we can present you the cost analysis of your project and the amount of materials you will use in your project as a report. We create contemporary and traditional buildings with a flexible design approach. We have a command of all architectural and engineering programs and have a carefully established team. Do not forget that you will enjoy working with us and we will decide together with you at every moment of your project, please send us a message to get started. Good day.

@furkancakir

Hi. Leave it to me https://www.freelancer.com/u/furkancakir # SolidWorks # Visualize # Composer # AutoCAD # 3dsMAX # ANSYS # LS-Dyna # Abaqus # Fusion 360 # Inventor # FreeCAD # Blender # Q-Blade # Altair EDEM # Rocky DEM # MeshLab # MS Excel # MS Word # MS Office # VBA for SolidWorks # VBA for MS Excel # C++ # Java # MatLab 600+ Character Per Minute.

@mircube

I'm Madiyar, and I believe my extensive 3D design and manufacturing background make me a strong contender for your metal garage drawer prototype project. I have significant experience in metal fabrication and 3D modeling, skills that are essential for this project. My proficiency in software like Adobe Illustrator, Autodesk 3ds Max, and Art CAM will allow me to bring your vision to life and ensure that the end product is not just functional, but also aesthetically pleasing. In addition to my technical skills, I also have a keen understanding of conceptualizing modular systems - uniquely qualifying me to customize the drawer sizes and configurations according to your specified needs. Having worked on different functional yet aesthetic hardware projects previously, I understand the importance of combining robustness with a sleek look. Furthermore, I’m comfortable with problem-solving in high-load scenarios such as this; for instance, calculating load tolerances for motion geometry optimization is second nature to me. My main goal is to ensure your drawers operate smoothly in cluttered environments and withstand heavy usage Given all of this experience, I can confidently tell you that choosing me would be a wise decision. With your guidance, we can collaboratively turn your vision into reality- a robust, highly functional yet visually appealing garage drawer system. Let's create something amazing together!

@manusharma2992

With my robust skill set in engineering, design, and product development, I strongly believe I can be the arm that brings your vision of a modernized overhead garage storage system to life. My extensive experience in 3D modeling and simulation enables me to take your concept rendering and create detailed engineering drawings, meticulously considering factors like load distribution and motion geometry. My mastery of tools such as AutoCAD, SolidWorks, Sketchup, and Revit will give your project the precision, beauty and customization that you desire. Moreover, I've spent significant time in metal fabrication and have a deep understanding of how to optimize designs for durability without sacrificing aesthetics. This knowledge has enabled me to create systems that not only withstand heavy use but also cater to modular needs - a vital capability for your project.

@kkirandeep582

With a track record of success in 3D design, 3D modelling and product design, I believe I have the skills and experience to transform your vision for a ceiling-mounted pull-down garage storage system into a tangible prototype. My proficiencies with CAD design, mechanical engineering, load calculations, motion geometry will be particularly useful in creating this robust and innovative drawer system. Not only am I adept at creating functional designs but also ensuring they have a sleek and modern aesthetic appeal. This means that I can create a prototype that not only meets your functionality criteria but also exudes the professionalism and elegance needed for commercial success.

@abushahama

Hi! I'm Abu, Top 30 SolidWorks freelancer with 12+ years in mechanical and industrial product design, including ceiling-mounted overhead storage systems, gas-assisted mechanisms, sheet metal enclosures, and modular customisable hardware with full load calculations and prototype-ready CAD. I understand you need a ceiling-mounted pull-down garage storage system for 27–31 gallon storage totes — gas-assisted overhead drawer lowering to 36"–42" without a ladder, 48" wide × 30" deep × 20" closed height, 150 lb capacity — with smooth operation, heavy-duty durability, sleek modern aesthetics, and adjustable drawer sizes and configurations for different user needs, supported by CAD design, load calculations, motion geometry, and prototype development documentation. I have strong experience designing overhead and wall-mounted storage structures, gas spring mechanisms, modular sheet metal assemblies, and structural systems where load capacity, motion kinematics, and DFM for metal fabrication are all critical. My designs go from concept to fabrication-ready documentation efficiently. For your system: review your concept rendering → validate load cases and gas spring sizing for 150 lb at 36"–42" travel → design full CAD assembly in SolidWorks with sheet metal parts, motion geometry, and adjustment features → deliver 3D model, fabrication drawings, BOM, and motion analysis summary. Ready to start — please share your concept rendering so I can begin the structural and kinematic layout.

@ENG1mga

Welcome I can help you for the drawer design and prototyping it I MADE MANY SMART DEVICES THAT MANUFACTURED AND USED IN REAL YOU WILL GET IT DONE PERFECTLY IN LESS TIME CHECK MY LATEST REVIEWS > (http://www.freelancer.com/u/ENG1mga) I have previously worked on, Lifting Set of Drones Mechanism, Robotic Arm, Delivery Robot, Automatic Wiring Machine, Solenoid Engines, Car Rooftent, Boat Lift Mechanism, Shoe Treadmill Mechanism Mechanical Ventilator and many other projects. I use Solidworks, Fusion 360, and ANSYS, COMSOL I have a workshop specializing in all 3D printing and CNC machining work, so I strive to provide the highest quality and precision. What you will receive with me: - 2D drawings - 3D files - Complete Tech. Formats - Finite Element Analysis (FEA) (if needed).

@Ryan15222

Hello, I’m very interested in supporting the development of your ceiling-mounted pull-down garage storage system. I have experience in mechanical design, metal structures, motion systems, and prototype development for heavy-duty products. Your concept combines structural engineering, assisted motion, and manufacturable product design, which aligns well with my background. I can assist with: - 3D CAD design and assembly modeling - Motion geometry and linkage development - Gas-strut/counterbalance calculations - Structural and load analysis - Prototype-ready fabrication drawings - Hardware and material selection - Modular drawer/tote configuration concepts Key focus areas: - Smooth and safe lowering motion - 150 lb load capability - Anti-bind and anti-racking behavior - Ceiling mounting/load distribution - Durable metal construction - Clean modern appearance - Manufacturable and scalable design Deliverables can include: - SolidWorks/Fusion 360 files - STEP exports - Fabrication drawings - BOM and hardware recommendations - Motion studies and load calculations I also have experience with telescopic slides, gas springs, pivot mechanisms, and welded steel assemblies. A few questions: 1. Manual-assisted only, or future motorized version planned? 2. Preferred material: steel, aluminum, or mixed construction? 3. Do you already have additional sketches or dimensions beyond the rendering? Best regards,

@xabhix

Hi, I can design your metal garage drawer system prototype with clean, functional, and fabrication-ready CAD modeling. I have 7+ years of experience in mechanical/product design, sheet metal assemblies. Drawer systems often benefit from modular layouts and reinforced slide structures for durability and smooth operation. ✔️ Metal drawer system CAD design ✔️ Sheet metal & fabrication-ready modeling ✔️ STEP, DXF, STL, SLDPRT/SLDASM files ✔️ Prototype and manufacturing support Portfolio: https://www.freelancer.in/u/xabhix I own a 3D printer and I’m available to start immediately. Could you share reference sketches, dimensions, or drawer slide requirements? Best regards, Abhishek

@CreativeDesign50

Hi, I reviewed your metal garage drawer system prototype project and I’m genuinely excited about it. I can help create a clean, functional, and manufacturing-focused drawer system design with organized structure, practical storage layout, and durable construction planning. I understand the importance of smooth usability, strong metal framework, space optimization, accurate dimensions, and prototype-ready CAD workflow for reliable fabrication. ✔ Metal drawer system design support ✔ Functional and durable storage layout ✔ Manufacturing-focused CAD modeling ✔ Accurate dimensions & clean assemblies ✔ Prototype-ready technical workflow ✔ Organized files for fabrication use You can view my portfolio here: https://www.freelancer.in/u/CreativeDesign50 We can discuss more on chat. Best regards, Kirandeep Kaur

@CADninja

Hi the concept looks interesting. Is this an AI generated concept or do you have more technical specifications about the linkages and other hardware used? I can show the preliminary layout free of charge, to ensure we are on the same page. My past work is available at my bio link designcenter3d.in. Here is more about me: A mechanical/Industrial designer with the strong sense of professional ethic. I possess skills to convert an idea into a functional design. I am strong at technical concept design, feasibility study, product research, engineering design, CAD, aesthetics, ergonomics, DFMA, Rendering, Animations etc.

@gzarali

Hi, I’m a multidisciplinary engineer focused on design + analysis, delivering production ready CAD and simulation-backed solutions. I work across mechanical and architectural scopes, with clear drawings, practical detailing, and fast communication. Feel free to check my profile for similar projects ,happy to review your scope and suggest the best next steps. G. Zaralı

@sakshis576

As an experienced designer and engineer, I'm no stranger to tackling unique and intricate projects such as your ceiling-mounted pull-down garage storage system. I bring a wealth of skills in 3D design, CAD modeling, mechanical engineering, and manufacturing design that I believe would be an exceptional fit for your needs. In addition to my technical expertise, I understand the significance of high-quality aesthetics in product design – a vital trait for your preferences towards a sleek look coupled with utmost functionality. I can effortlessly incorporate these essential features while ensuring maximum durability and seamless operation in the initial designs.

@mouniridmed

Hello I can create detailed CAD models and engineering calculations for your garage drawer system. I am an experienced CAD/CAM designer specializing in CATIA, SolidWorks, and AutoCAD, with over 10 years of professional freelance and teaching experience. I excel at transforming 2D plans into precise, detailed 3D models, creating accurate assemblies, parts, and visualizations ready for manufacturing or prototyping. With my expertise in Part Design, Generative Shape Design (GSD), Drafting, and Assembly Design, I deliver high-quality, production-ready models in STL, STEP, OBJ, or FBX formats. I am detail-oriented, efficient, and committed to exceeding client expectations. Best regards, Mounir

@iamVutuk

Vutuk Design and Media offers comprehensive mechanical engineering and product visualization services, making us the ideal partner for your garage drawer system prototype. Our team utilizes 15 years of industry experience to create detailed SolidWorks models that are optimized for high-volume production. We focus on the fine details of sheet metal design, such as bend allowances, notch clearances, and hardware integration. To better define the scope of the project, we would like to clarify: Will the drawer system be a standalone unit, or does it need to be modular for integration into a larger workbench or cabinetry series? Do you require a non-linear FEA stress analysis to simulate the structural performance of the unit under maximum weight capacity? What specific metal material and finish (e.g., powder-coated cold-rolled steel or stainless steel) are you planning to use for the prototype? Would you like us to provide 2D technical animations or exploded-view drawings to assist with the assembly and installation process? Vutuk Design and Media combines technical precision with visual excellence. We invite you to visit our profile and explore our portfolio to see our past work in machine design, sheet metal engineering, and product visualization. We are ready to help you bring this storage solution to market.

@subodhkumarv2015

Hi, there I hope you’re doing well. I’m a Mechanical Engineer with strong experience in SolidWorks, Fusion360, Inventor, product design, 3D modeling, Printing, and manufacturing drawings. I’ve completed many projects as following: • 3D modeling and mechanical design with functions • Detailed engineering drawings and GD&T • Product development from sketches or new concept idea • 3D printing(STL) and Design for manufacturing (STEP) • High qualitied Rendering I can deliver accurate results and fast revisions, and I always maintain clear communication and reliability. I’d be happy to discuss your project details and start immediately. Looking forward to working with you. Best regards

@muhannadbukhamse

Hello ✅ Do you prefer a guided rail system, articulated arm mechanism, or cable-assisted lift geometry for controlled lowering under full 150 lb load capacity? ✅ Will the ceiling mounting need structural verification for different joist types and garage framing conditions during prototype engineering? I have experience in mechanical product development, structural design, and CAD prototyping for heavy-duty modular systems using steel fabrication and motion-assisted mechanisms. I can help engineer the ceiling-mounted pull-down storage system including load calculations, gas-assisted motion geometry, CNC/fabrication-ready CAD models, and durable modular drawer configurations optimized for smooth operation and user safety. My workflow includes detailed 3D modeling, mechanical clearance studies, structural support analysis, and prototype-oriented design suitable for manufacturing and future product scaling. Let’s communicate further to review the concept rendering, motion requirements, and engineering approach. Best regards,

@Ewaidiouse

Mechanical Design & Engineering Expertise: Reverse Engineering | Fabrication | DFM | 3D Printing | Concept Design | Product Development | Robotics Profile: I am a Mechanical Designer with over 8 years of experience turning complex ideas into functional, manufactured products. I focus on creating designs that aren’t just visually sound, but are technically optimized for real-world performance and efficient production. Software Proficiency: SolidWorks • Autodesk (AutoCAD, Fusion, Inventor) • Maya • Matlab • Rhino • Catia Best Regards, MOHAMED EWAIDA Senior Mechanical Designer