Annulé

Convert my BOM and Circuit Design Files to an Eagle Schematic and Improve battery charging speed

BOM will be provided to promising applicants

I have a BOM and some circuit design files that need to be converted to an eagle schematic that allows me to make design modifications in the future. I have made this PCB in the past but do not have the schematic files to make modifications. The order of components needs to stay the same and the size of the PCB must stay the same. The PCB is for a pressure sensor array with vibration motor drivers and BLE communication. It also includes a rechargeable battery module. This is a 2 part project, the first part is to recreate the original PCB and the second part is to improve the battery charging module for the PCB.

1) Make Eagle schematic and Gerber files based on circuit design drawing and BOM provided. Keeping the PCB size constrains the same and the positioning of the RGB LED, Power Button and charging port the same.

-Size is: 19mm X 96mm.

-Thickness is 1.6mm.

-Material is FR-4 TG130.

-Copper Thickness 1oz. Inner copper thickness 0.5oz.

-Surface finish HASL.

-Min tracking/spacing = 6 mil

-Min hole size = 0.3mm

2) Improve the charging speed of the PCB. Our previous PCB took more than 4 hours to charge a 3.7V LiPo battery. We would like to reduce this time to 2-3 hours if possible. We would also like the freelancer to double check the motor driver which controls the vibration motors in our PCB. The motor drivers should provide a steady 3V supply to each of the 4 motors but this seems to decrease with the battery level.

Proposed Milestones:

1) Eagle Schematic and Gerber Files for Original PCB, BOM (20% payment)

2) Eagle Schematic, BOM and Gerber Files for Improved PCB, BOM (20% payment)

3) Testing of both PCBs in our office after we have them manufactured based on the gerber and BOM files (60% payment)

Compétences : Mise en Page PCB, Electronique, Génie Électrique, Design de circuits, Microcontrôleur

en voir plus : pdo design files, bluetooth audio circuit design, convert flash media server files red5, circuit design saving money, basic circuit design switch, power supply circuit design, circuit design needed, convert punch home design autocad, photoshop psd vector design files, punch design files autocad, bid circuit design, edit design files, convert punch home design files, global gps project circuit design schematic, schematic circuit design tester, bom circuit design, eagle circuit design freelancer, circuit design in eagle, Electronic circuit design in eagle, eagle circuit design

Concernant l'employeur :
( 5 commentaires ) Tsukuba, Japan

Nº du projet : #20454700

Décerné à:

CordWoodTech

We are a team of engineer experienced in electronics, circuit design, PCB design, micro-controller programming, Arduino and wireless protocol. We have designed and developed circuits and products in the field of weara Plus

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 10 jours
(26 Commentaires)
5.0

29 freelances font une offre moyenne de 623 $ pour ce travail

sagradoamicus

Hi I am experienced electronics engineer with more than 9 years of experience. I can do it for you. The files attached are just the images of the top and bottom silk layers. We will have to create the schematics by us Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(268 Commentaires)
8.0
mechatronicsengr

Hi, I hope you are doing well. I have expertise in Eagle Based PCB, Schematic, BOM ,Gerber development projects. I have reviewed your requirements and I can execute the project as your requirements. Looking Forward, Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(72 Commentaires)
6.7
vtlabs

Hi My name is Vusi and I am an Electronic Engineer with over 4 years experience designing PCBs. You can learn more about me from my Freelancer profile.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(46 Commentaires)
6.4
bijan01in

Hi I am interested to your project. I am familiar with electronics, microcontroller as well as PCB design by Eagle. Thanks.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 20 jours
(96 Commentaires)
5.9
krunalbhongade

Hello. Greetings of Peace! Please check my website for my works. [login to view URL] I have been developing industry-standard custom electronics from 7 years. I have developed systems including a s Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(28 Commentaires)
5.9
jitendracf

Hi, I have more than 8 years of experience in embedded system design and development. I have expertise in PCB designing upto 6 layers using different cad tools like cadsoft eagle, altium, Kicad etc. You can go through Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(14 Commentaires)
5.1
arunprakaash6

Hello, I am Arun Prakaash, PCB Designer. I have 3 years Experience in designing. I am using Altium Designer to design a PCB. I will design a PCB with 3D model and BOM. I will send my sample BOM and Sample PCB in chat Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(15 Commentaires)
4.6
jitendrabaraiya

i have more than 6 years experience in embedded firmware and hardware design with eagle and altium design software . and i have already design Battery charging circuit with 2A charging current . so i can do your job wi Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 30 jours
(6 Commentaires)
4.6
hari1406

Hi Sir. I am Electrical and Electronics Engineer with vast amount of expertise in the area of PCB designing. I have ability to design highly proficient PCB ( Single layer - 16 layers ) with both high and low speed desi Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(26 Commentaires)
4.5
tokumei

Hello, Good day, I read the project details and your proposal and I would like to provide you support in designing the PCB. I'm an experienced EAGLE user and in electronics so I'm confident in make this board success Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(6 Commentaires)
4.1
mazeemsk

I am an Embedded Engineer and PCB Designer. I read through the job description very carefully and I am absolutely sure that I can do the project very well. I have worked on similar projects to what you are looking for Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 2 jours
(12 Commentaires)
4.0
sawban2

Hello. How are you? I have read the project description,and I have confidence that I can carry the job to success. Cuz I am a developer with powerful skills in power electronics and pcb design , I know the real meani Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(6 Commentaires)
3.4
iffi37

hi i would love to do your task. i 'll do unlimited revisions till satisfactorily completion of your [login to view URL] for your response

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(8 Commentaires)
3.5
samuelrvw

What is he AH of the battery? Also the type 0.5C or 1C etc. We need to see if its physically possible by calculating it. Dimension of the board is (19mm X 96mm.) I see there are some drill holes if you have a DXF/DWG f Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(4 Commentaires)
0.9
raimilson

Hello I have plenty of experience working PCB reverse engineering, schematics and design. I can make this project and receive 100% after you test. Best Carlos

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(0 Commentaires)
0.0
divinedesignr

Hello, Hope You are doing great. Let's get You some brief details about us. We are innovative product design and development company, specializing in designing products for industrial and mechanical industries. We wo Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 35 jours
(0 Commentaires)
4.7
Andy728Marin

Hi,dear. I have just read your project and I felt happy to see it. I have experienced for +6 years in this field. Particularly, I have ever done the job like this as you want. I want to hear your advice and discuss in Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 2 jours
(0 Commentaires)
0.0
mehtajat

Dear Sir, I have many years of Firmware development, circuit design, PCB design experience. I have used different PCB design software like Altium Designer and Eagle etc. I have also worked with battery charging circui Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 14 jours
(0 Commentaires)
0.0
raymondtech

Hello. I ready your proposal and an do your project and can convert it to eagle. I am having above 20+ years experience in PCB design using P-CAD and Eagle PCB I am very much familiar in design pcb for analog/mixed s Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)
0.0
developersperhr

We will design (schematic and PCB layout) any small, medium or complex device in Eagle PCB CAD (v9.3.1 or latest). The PCB can be single or multi-layer (up to 10 layers) as the customer requires. If requested, a Soli Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)
0.0