Need PCL program written for my Velocio Branch 1430 > need program in vBuilder format

Terminé Publié le il y a 4 ans Paiement à la livraison
Terminé Paiement à la livraison

I have listed the input/output labels used by the vBuilder that correlate to the Branch 1430

drag racing timing system - 2 lanes - a left lane / a right lane

starting line momentary push button (input-C1) to activate the process > on press makes the blue light blink (output-D1) indicating racers can stage.

Each lane - with a startling line infrared beam (as an input) that is there to indicated when the racer is in place --- and when racer leaves. The beam has to stay activated for the tree to start the sequence

Left lane (input-C2) > which turns on left stage LED (output-D2) / Right Lane (input-C3) > which turns on right stage LED (output-D3)

Christmas tree (as its called in the sport) is a an array of lights on a self standing pole. Picture attached

Top bulb > BLUE -- that blinks (only after starting line momentary push button is activated (pushed once) (input-c1)

Array of lights sequence -- top to bottom

left lane Amber light (output-D2) > lights up solid (stays on) while the left lane infrared is blocked - indicating a racer is ready

right lane Amber light(output-D3) > lights up solid (stays on) while the right lane infrared is blocked - indicating a racer is read

a randomized timer between .5 seconds & 2.0 seconds initiates the following light pattern (only if output-D2 & output-D3 is activated)

Amber light (output-D4) > light comes on for .5 seconds

Amber light (output-D5) > light comes on for .5 seconds >> .5 seconds after D4 light goes off

Amber light (output-D6) > light comes on for .5 seconds >> .5 seconds after D5 light goes off

Green Light (output-E1) > light comes on for 3 seconds >> .5 seconds after D6 light goes off

Left Red Light (output-E2) >> comes on -- flashing for 5 seconds ONLY if input-C2 is de-activated before the green light E1 lite > in this condition output-E4 is activated

Right Red Light (output-E3) >> comes on -- flashing for 5 seconds ONLY if input-C3 is de-activated before the green light E1 is lite > in this condition output-E5 is activated

RULE > if both left and right lanes de-activate before green light (output-E1) is lite -- which ever was first is only red light activated and corresponding WIN light is activated

finish line left lane infrared beam (input-C5)

finish line right lane infrared beam (input-C6)

finish line right lane WIN light (output-E4)

finish line left lane WIN light (output-E5)

which ever of input-C4 or input-C5 is activated first indicates winner -- -- if either activated the red light the other WIN light goes on - if both did then who ever did 2nd activates WIN light

Basic explanation of the process between two competitors

Button pushed by starting line official > blue light blinks (indicates racers can stage - which is process of moving vehicle in lanes and break the beam)

left lane infrared broken > left lane amber light turns on (and stays on as beam is broken) >> indicating the racer is staged

right lane infrared broken > right lane amber light turns on (and stays on as beam is broken) >> indicating the racer is staged

Only after both left and right lane amber lights are lite -- randomized timer starts tree count activation of sequence

after green light is on - racers take off -- first one to break the finish line infrared (without red lighting) wins - and win light comes on.

System stops -- then waits for C1 to be pressed for the whole process to start again.

Branch 1430 - 6 D in, 12 D out, 1 RS232/RS485

Microcontrôleur Mise en Page PCB PLC & SCADA

Nº du projet : #23564117

À propos du projet

2 propositions Projet à distance Actif il y a 4 ans

Décerné à:

cesur135

hello i m automation engineer i m expert and i have finished many projects water treatment,iron steal plant,machine automation etc.. i can do let [login to view URL]

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 5 jours
(10 Commentaires)
3.7

2 freelances font une offre moyenne de 133 $ pour ce travail

writiqueproject

As an electronic architect, I have been working in PCB structure/design and firmware programming field for 8+ years. Here is a portion of the encounters that I worked back. - Schematic and PCB Format is utilizing Alt Plus

$100 USD en 2 jours
(3 Commentaires)
2.5