Find Jobs
Hire Freelancers

Manual J calculations

$250-750 USD

En cours
Publié il y a 10 mois

$250-750 USD

Payé lors de la livraison
We are going to install mini-splits for heating and cooling in our A frame cabin in Rathdrum, Idaho. We need help with the correct calculations and paperwork for the building permit.
N° de projet : 36682037

Concernant le projet

26 propositions
Projet à distance
Actif à il y a 10 mois

Cherchez-vous à gagner de l'argent ?

Avantages de faire une offre sur Freelancer

Fixez votre budget et vos délais
Soyez payé pour votre travail
Surlignez votre proposition
Il est gratuit de s'inscrire et de faire des offres sur des travaux
Décerné à :
Avatar de l'utilisateur
Hello there! My name is Saed and I am a professional architect/structural/mechanical engineer with 23 years of experience. I understand that you are looking for help with manual j calculations for mini-splits for heating and cooling in your A-frame cabin in Rathdrum, Idaho. We can help you with the correct calculations and paperwork for the building permit. I have a team of licensed architects/structural engineers who can create plans for commercial/industrial/residences as well as provide complete sets of drawings for city permits. Our expertise includes preparation of drawings for the construction of new buildings, drawing up plans for alterations, updates and renovations of residential houses and industrial/commercial buildings, review of drawings based on the building code of the state and seal/correct and seal if there are any errors in the drawings, drawing up and reviewing water supply/sewer piping creation and calculation of site plans drafting/structural calculations for adding and removing decks/catches I will remain responsible for revisions until they are approved by the City. Please let me know if you would like me to discuss further or answer any additional questions
$250 USD en 2 jours
0,0 (0 commentaires)
0,0
0,0
26 freelances proposent en moyenne $393 USD pour ce travail
Avatar de l'utilisateur
Hello, I am an experienced engineer, I am expert in Mechanical and Hvac designs so i can provide the required calculations in the required time. Please check my portfolio and reviews. Thanks.
$350 USD en 3 jours
4,9 (68 commentaires)
7,1
7,1
Avatar de l'utilisateur
Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.
$750 USD en 7 jours
4,9 (42 commentaires)
6,9
6,9
Avatar de l'utilisateur
Hi there,I'm biddin on your project "Manual J calculations" I have read your project description and i'm an expert in Mechanical Engineering domain therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .
$750 USD en 3 jours
5,0 (20 commentaires)
6,3
6,3
Avatar de l'utilisateur
I am writing to express my interest in the HVAC Drafting Engineer role that you have posted. I am an experienced Mechanical Engineer with expertise in drafting, design and project management. I have a deep understanding of HVAC systems, duct designing, heating and cooling load calcultions. I have a strong background in using CAD software such as AutoCAD and REVIT. I have experience in creating detailed and accurate 2D and 3D drawings, which can be used for fabrication and assembly. I have a strong eye for detail and ensure that all drawings are accurate and meet all industry standards. I have excellent project management skills and have successfully managed projects from conception to completion. I have a proven track record of delivering projects on time, within budget, and to the highest standards. I am able to work independently or as part of a team, and I am confident that I would be able to bring my experience and skills to the role to help drive the success of your projects. If you are looking for an experienced, dedicated and highly motivated Mechanical Engineer, I believe that I would be the ideal candidate for this role. I would welcome the opportunity to discuss my suitability further and I look forward to hearing back from you soon. Thank you for considering my application. Best regards
$500 USD en 7 jours
4,9 (55 commentaires)
6,1
6,1
Avatar de l'utilisateur
Hi, im a Energy manager/ Mechanical Engineer with years of experience in energy management within the industrial zones. I can provide a detailed load calculation for the given domain with ANSYS simulation done for the given system in which based on the simulation, i can provide recommendations for optimizing the system within the domain. Please refer my portfolio for sample works. Regards Ishan
$250 USD en 2 jours
4,9 (43 commentaires)
5,7
5,7
Avatar de l'utilisateur
Hello, Dear Concern, We are a team of professional members of Civil, Structure, Construction, Mechanical, Thermal, Renewable Energy, Industrial, Chemical, Aerospace, Avionics, Aeronautical, Electrical, Electronics, and Telecommunication Engineering. We are also experts in the following software: ANSYS, ABACUS, AUTOCAD, STAR CCM+, COMSOL, CREO, CATIA V5, Homer Pro, MATLAB, Simulink Embedded system, PCB DESIGNING, ARDUINO, ESP, Proteus, Eagle, Altium, Solidworks PCB, SPSS, STATA, Stud pro. We are trusted people and will never break your trust. We will deliver your work within your defined timeline. I assure you that your work will be error-free and 100% professional with high quality. We will never waste your time and money. We will try over best to make you proud. Please consider me for this job. Thank you in advance. Kind Regards
$250 USD en 1 jour
4,3 (13 commentaires)
4,7
4,7
Avatar de l'utilisateur
Hello there! My name is Collins, and I am a mechanical engineering specialist with extensive knowledge in heat transfer. I have previously done Manual J calculations to determine the heating and cooling loads for a building, including the selection of appropriate equipment such as mini-split systems. In my past work I was able to; Determine the heat transfer characteristics. Calculate the infiltration and ventilation loads Assess internal heat gains Determine the design conditions. Perform load calculations Select appropriate mini-split systems I would be delighted to help you with your heating and cooling calculations for your A-frame cabin in Rathdrum, Idaho. With my expertise in manual calculations and matlab, I am confident that I can provide the most accurate results possible for your project.
$500 USD en 7 jours
5,0 (11 commentaires)
4,0
4,0
Avatar de l'utilisateur
Hello, I would like to work with you Manual J calculations I am Expert In the 2D/3D AUTOCAD. I have the Great hand to Create the all kind of Floor plan, site plan design in 2d and 3d. Software work I've done in the past Like: - Autocad, revit, Maya, 3dsMAx, 3d modeling All kinds of work I can do. So please, I appreciate you when you answer me. Thank you and greetings. Mannu.
$500 USD en 7 jours
5,0 (4 commentaires)
3,5
3,5
Avatar de l'utilisateur
Hello Jeff S., I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Manual J calculations plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team
$680 USD en 5 jours
5,0 (1 commentaire)
2,9
2,9
Avatar de l'utilisateur
hello nice day for you we are professional HVAC, mechanical engineering designer for more than 10 years experience send me to start and do all the calculation for each part for the split unit with HP and i will support you for all installation and everything send me to start and do calculation for all rooms or parts waiting your message thanks mohammad
$250 USD en 7 jours
4,9 (5 commentaires)
3,0
3,0
Avatar de l'utilisateur
Hello there! My name is Javier, and I'm a mechatronic engineer with a master's degree in industrial design and extensive experience in electrical engineering. I have several years of experience in modeling, projects, motion studies, Gcode programming, injection molding and 3D rendering software such as SolidWorks, Catia, Fusion 360 and Inventor. I understand that you are looking for help with manual J calculations for mini-splits for heating and cooling in your A frame cabin in Rathdrum, Idaho. I believe I am the perfect person for this job because of my extensive knowledge in electrical engineering and mechatronics. This will allow me to provide accurate calculations for the building permit setup required for mini-splits installation. Additionally, my skillset includes PCB and schematic design, microcontroller PCB board design, power electronics (AC_DC, DC-DC), embedded systems and circuit design. This makes me well-suited to tackle this project: my expertise meets your needs exactly. I'm confident that my quality assurance track record speaks for itself when it comes to customer satisfaction; if you'd like to discuss further please don't hesitate to reach out!
$250 USD en 7 jours
5,0 (1 commentaire)
2,1
2,1
Avatar de l'utilisateur
Manual J calculations. I can do it. As 9+ years experiences in these field. I can give good quality work. I have read the guidelines of your work.I believe that i can provide you the best quality works you are anticipating from this platform give me a chance to show you the best i can do at your service.
$500 USD en 4 jours
4,4 (1 commentaire)
2,0
2,0
Avatar de l'utilisateur
Hi, I have seen your posting and I am interested in your project, I believe that I am the best candidate for such project, for what I have of site experience for more that 2 years, I also have obtained my bachelor's degree in Mechanical power engineering, I can provide with correct calculations within a reasonable time of frame. I look forward to discussing further details with you, so please contact me once you have made your decision, I am always available for service.
$250 USD en 2 jours
5,0 (1 commentaire)
1,4
1,4
Avatar de l'utilisateur
Hello, I am an experienced structural engineer and can suggest the best structural solution for your project. We provide the necessary drawings and calculations. Please check out my portfolio and reviews. Thank you
$300 USD en 3 jours
0,0 (0 commentaires)
0,0
0,0
Avatar de l'utilisateur
Hey How are you ? Iam Mahmoud mechanical engineer , specialist in HVAC and designing so I reviewed your project and I will discuss with you for the best selection in HVAC with submit you calculation for loads Just contact me for details
$250 USD en 1 jour
4,4 (1 commentaire)
0,0
0,0
Avatar de l'utilisateur
Subject: Proposal for Mini-Splits Installation Project Dear, I hope you're doing very well. I am writing to submit a proposal for the installation of mini-split heating and cooling systems in your A-frame cabin located in Rathdrum, Idaho. As an experienced Chemical Engineer with expertise in HVAC systems and mechanical engineering, I am confident that I can provide you with the necessary calculations and paperwork required for the building permit, as well as ensure the successful installation of the mini-splits. Project Objective: The primary objective of this project is to install a highly efficient heating and cooling system in your A-frame cabin using mini-split technology. The system will be designed to provide optimal thermal comfort throughout the year while considering energy efficiency and sustainability. Scope of Work: 1. Assessment and Calculation 2. System Design 3. Permitting Assistance 4. Installation and Commissioning I believe that my expertise in chemical engineering and HVAC systems, along with my experience in designing and installing various industrial systems, makes me well-suited for this project. I am committed to providing you with a high-quality HVAC system that meets your requirements and ensures long-term comfort and energy efficiency. I would welcome the opportunity to discuss this proposal further and address any questions or concerns you may have. Thank you for considering my proposal
$250 USD en 5 jours
0,0 (0 commentaires)
0,0
0,0
Avatar de l'utilisateur
Hi There, I'm mechanical design expert, I've 7 years works experience for mechanical design and CAD modeling, I can do many think with many 3D software for example SolidWork, AutoCAD, 3DxMax, SkatchUp, Inventor and other software, Let's see my design on my profile and then we can discuss about the project more detail. Best Regards, Maliki.
$250 USD en 4 jours
0,0 (0 commentaires)
0,0
0,0
Avatar de l'utilisateur
I can help you Sir . Can you share further details . Thankyou .......................................
$250 USD en 2 jours
0,0 (0 commentaires)
0,0
0,0
Avatar de l'utilisateur
Hello sir, I am a mechanical engineer and experienced in HVAC system design and installation who can help you with the correct calculations and paperwork for the building permit for installing mini-splits in your cabin. To install mini-splits in your cabin, I will need to do the following: Conduct a site visit to assess your cabin’s layout, insulation, windows, and electrical system. Calculate the heating and cooling load for each zone or room, based on the size, orientation, and usage of the space. Select the appropriate mini-split model and size for each zone or room, based on the load calculations and your preferences. Prepare a detailed plan and diagram of the installation, showing the location and specifications of the indoor and outdoor units, the refrigerant lines, the electrical wiring, and the condensate drainage. I can complete this project within 3 weeks from the date of hiring. I am available to start working on your project as soon as possible. I will communicate with you regularly and update you on the progress of the work. I will also answer any questions or concerns you may have along the way. I am confident that I can provide you with a high-quality installation that will meet your needs and expectations. If you are interested in hiring me, please contact me and we can discuss the details further. Thank you for your consideration and I look forward to hearing from you soon.
$400 USD en 7 jours
0,0 (0 commentaires)
0,0
0,0
Avatar de l'utilisateur
Hi. I can help with this project. I am a mechanical engineer with experience in the development of plans and technical documents such as bases and design criteria, material specifications, calculations of system air conditioning systems design ducts for air conditioning systems, and of course all the associated drawings of each of the mentioned systems (floor plans, elevation, isometric). Likewise, I Can do CAD drawings. I Can do thermal/energy calculations. I Can do BMS specifications. Likewise, I use the Hourly Analysis Program HVAC. I use ELITE Software Program HVAC. I can prepare shop drawings for HVAC and Plumbing individually. Furthermore, I can Be Preparing shop drawings for Fire Fighting Systems. I can prepare shop drawings for Pump Room Details. Likewise, I can prepare shop drawings for External Works of Water Supply, Sanitary, and Storm Water systems. I can Prepare As-built drawings of HVAC, Plumbing, and Electrical Services. I can prepare drawings of Mechanical and Electrical Builder's Work. Please contact me to discuss and review the different points of the project. Best regards.
$500 USD en 7 jours
0,0 (0 commentaires)
1,0
1,0

À propos du client

Drapeau de UNITED STATES
Phoenix, United States
5,0
2
Méthode de paiement vérifiée
Membre depuis avr. 29, 2011

Vérification du client

Merci ! Nous vous avons envoyé un lien par e-mail afin de réclamer votre crédit gratuit.
Une erreur a eu lieu lors de l'envoi de votre e-mail. Veuillez réessayer.
Utilisateurs enregistrés Total des travaux publiés
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.