Fermé

ANSYS_micro_channel_flow_with_heat_transfer_study

Research Question

A wide variety of suggested design improvements have been made to microchannels since their inception. Still, nearly all research resides in a low volume of design options compared to a straight rectangular microchannel. Although this provides an easy comparison to this typical design baseline, nearly all studies use a wide range of boundary conditions, geometric feature sizes, and differ in coolant and solid material choice, leading to a nearly impossible comparison between the designs proposed in individual research papers. If any of these designs were to be considered for use in any given application, it would be difficult to compare these designs; thus, extensive research would be required to address the issue, perhaps excluding simple variances in cross-sectional geometry.

With precisely that in mind, the purpose of this research is to investigate a wide variety of possible microchannel designs, identifying those designs that provide the highest heat transfer rate, and then examine these designs in greater depth, optimizing their geometry to suit specific applications. These designs are first considered in generality but are also more deeply considered for piezoelectric ceramic stack cooling applications. This application differs from much existing research as these systems can usually achieve higher Reynolds number flows than is typical, affording higher pressure drops since they are not as strictly constrained regarding pump sizes.

Compétences : Génie Mécanique, Analyse d'éléments finis, Ingénierie, Génie Chimique, Ansys

Concernant le client :
( 666 commentaires ) Bangalore, India

Nº du projet : #34382807

12 freelances font une offre moyenne de 194 € pour ce travail

megiengineers7

Hi there, I am a mechanical engineer with expertise in CFD and FEA. I have expertise in heat transfer and heat exchanger design. I have done few projects for micro channel heat transfer and i have prepared detailed ca Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 7 jours
(69 Commentaires)
6.1
saleiz2019

Hello there Thank you for your detailed description CFD expert here using ANSYS Fluent for more than 8 years I have a mechanical engineering background and thermal engineering masters degree I will do as many simul Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 7 jours
(21 Commentaires)
5.3
(45 Commentaires)
5.5
asherry137

Hi there, I'm a mechanical engineer with decent experience in CFD and FEA. I have computed several simulations and hand calculations earlier. I feel very confident to carry out this research work. Let me know if I coul Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 7 jours
(10 Commentaires)
4.3
zahid49ch

Hello, Dear Employer. Greetings of the day, I have studied your project description & found it interesting. I have done many project-related engineering, 3D modeling, product designing, CFD & FEA simulation, design ana Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 7 jours
(27 Commentaires)
4.3
AndreyAgeenko

Hi, I read the job description carefully and believe it has a disruptive, brilliant idea. I have been developing engineering projects with Solidworks, Ansys very hard since 10 years ago. As a Fluid machine designer, I Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 3 jours
(6 Commentaires)
3.8
ngocnhan2790

Hi. I have just read your proposal and understood your requirements. I am a mechanical engineer with full experiences in ANSYS simulation(FLUENT/CFX, Mechanical products, etc.). Please contact me to discuss this proje Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% EUR en 1 jour
(5 Commentaires)
3.4
pra009anu

Hi there I am an experienced mechanical engineer and expert in solidworks & Solidcam with experience in industrial automation of more than 7 years. I have designed, worked and installed various industrial machine and I Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 3 jours
(8 Commentaires)
3.5
hidayetkaraca96

Hi, my name is hidayet karaca and I am a mechanical engineer. I have read trough your job and I am capable of doing it. Lets discuss further. You can check out my credentials and my previous jobs from my homepage.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 7 jours
(3 Commentaires)
3.0
Pandiyan789434

hello ,Greetings of the day I read thoroughly the project description "ANSYS_micro_channel_flow_with_heat_transfer_study". I will make analsis as per your requirement in on time delivery and any changes or revisions a Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 5 jours
(0 Commentaires)
0.0
bcningenieria

Hello dear, My name is Abel, I am a Spanish mechanical engineer, I have extensive experience in designing machinery and structures; and I consider that the work that you propose I could carry out perfectly. I send my Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 15 jours
(0 Commentaires)
0.0
neerajjain80

as per your requirement CFD analysis required for microchannel,. for this u wanted to analysis wide vairiety of designt to find optimum,efficient design. so no of analysis mau many. also e have t o run for different r Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% EUR en 15 jours
(0 Commentaires)
0.0