Fermé

Graphical text to hex to text converter for Linux

This project is to adapt an existing Open Source program called GHex. It will not be re-distributed so therefore there is no IP issue as far as I know. If you are concerned about this you may wish to let me know that you will re-write from scratch.

The adaption shall use the same software technologies as GHex and will be used on the Linux platform. The completed project will be installed just in the same manner as GHex.

My need is to be able to see and translate characters for an LCD driver called the HD44780. There are two character sets for the HD44780, A00 and A02. I do require a full character map so A02 should be displayed on screen.

In the GHex software one can see a section that displays line numbers on the left, then a central portion that contains the hex and then, on the right, a section that has the ASCII symbol for the hex.

I want an interleaved design similar in concept as Wireshark. My design would have a minimum of 48 characters horizontally with the hex on one line and the text or ASCII on the next line. There is no need to have a program that has a variable window size. I would like 64 characters across one line but 48 will do. The hex lines would have a background colour different to that of the ASCII or text lines. The font will distinguish between all characters without doubt. A '1' ("one") is different to a capital letter 'I' ("eye") or a lower case 'l' ("el"). (Unlike the font used here ...!)

I will need to be able to mouse over portions of the information in the hex or ASCII sections of the program and copy to clipboard. When I copy to clipboard it will be in a comma-delimited fashion. The hex numbers will be preceded with '0x' in this manner: 0x43 which would represent the letter 'C'. So a line of hex in clipboard would be: 0x01,0x02,0x03,0x04,0x05 and so on.

The hex numbers on screen, as in the GHex program, would be spaced. Directly underneath each hex number would be the ASCII symbol for that hex number. The hex on screen does not have the preceding 0x but looks the same as the GHex program.

I need to be able to paste into this converter either a line of hex or a line of text/ASCII and it will go ahead and convert my newly pasted information. Perhaps a button to take the contents of the clipboard and paste them into the program ?? Perhaps two different panes on top of each other, one that has ASCII at the top and hex underneath and one that has hex on top and ASCII underneath ??

At this stage, there is no requirement to do multiple lines. Just the one line of at least 48 characters across the screen will be OK. Assume a 1920 screen with the program starting in the centre of the screen. It should not take up all the width of the screen - maybe up to 95% ?. Use a smaller font if needed.

Try to think about how the end-user will use this program to convert either hex or ASCII strings. If you have any suggestions or queries about how it will operate discuss then with me beforehand.

A copy of the HD44780 is uploaded here. Pay attention to pages 17 and 18.

I would be presented with the full source code and the ability to install it as a final solution. There will be no time-outs or other impediments in the code. The project uses exactly the same software technologies as the GHex program for a reason. This tool should be thought of as a first-step in a larger suite of tools. I am not interested in a script.

This project needs to work on a Debian-based Linux OS that is at least a year old but also needs to work on a newly minted OS also. Perhaps the best platform to test on at this stage is the Mint platform. I am using 18.3 - you should test on Linux Mint 18.2.

You should present a video of your work showing how to install the program (if it isn't obvious) and how the program works. The project ends once the program has been successfully implemented at my end.

All the best.

Compétences : Linux, Programmation C, Graphical User Interface (GUI)

en voir plus : 16bit analog digital converter linux pcb, ascii hex converter code verilog, install video converter linux server, html pdf converter linux, md5 converter md5 text, youtube mp3 converter linux, jpeg hex converter, converter linux, mht file converter linux, mp3 m4r converter linux, openoffice converter linux, php code converter pdf text, docx doc converter linux, ringtone hex converter, pptx ppt converter linux command line

Concernant l'employeur :
( 4 commentaires ) Toowoomba, Australia

Nº du projet : #20401858

27 freelance font une offre moyenne de $563 pour ce travail

ITPyramid85

Hi, I am interested on your project really. i am linux app expert and have enough experience for 15 years. C/C++, linux is my top skill and I can give you perfect result. I have experienced on GHex and can adapt the he Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(15 Commentaires)
6.1
leemilun

Hi, nice to meet you. I am Gao M. I have read carefully your post and very interested in your project. I have much experience in linux open source development. Thus I am confident I can perfectly complete your project. Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 10 jours
(15 Commentaires)
5.2
gurtajs4

Hi, Raspberry Pi pro, have done many projects on RFID, GPU, GPIO and Video. I am a multimedia expert with Audio Video encoding/decoding experience in Linux/Android Domain. Delivered several projects on RPI, Digital Si Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 5 jours
(22 Commentaires)
5.2
MrtDolphin

Hi. I am programming king. I can work on your project to adapt GHex. Please check my profile and contact me. best regards.................................................................................................

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(3 Commentaires)
4.9
TakaAlex

Dear I have read your well documented description carefully to get a clear understanding of what you want and what I should achieve. Now I want to say that I am really interested in your task and I can do it successful Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(3 Commentaires)
4.6
itoasis1

Hi. I have review your project description. I have full experiences in Development. I am very interested in your project and also ready to start work immediately. Hoping for your soon Reply. Thank You Regard.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(11 Commentaires)
4.6
Ivan927

Hello! I am very interested in your post project. i am really looking for this kind of project for a long time in freelancer since i have rich experience on it. I think this project is very suitable for me and i am su Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(4 Commentaires)
4.1
adampohp79

Hi. thanks for your posting. I'm very happy to have a chance of bidding your project. I have experience in development of the projects like yours If you hire me, I'll do my best for your project and finish greatly in a Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(10 Commentaires)
4.3
ryongshan

Hi, ****** I'm a image processing expert and full stack developer from backend to frontend. ********** I've developed mamy project such as OCR, LPR, ANPR, Face Recogtion and have experiences more than +7 years. I thin Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 2 jours
(5 Commentaires)
3.7
Victorier006

hello,how are you. i read your bid carefully. i am c/c++, linux expert and have full experience for 10 years. c/c++, linux is my top skill. i can provide most quality and high speed. if you want to success, please cont Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(4 Commentaires)
3.4
MichealSMoreno

Dear client, how have you been? I've read your project description carefully. Presenting this proposal with 100% confident. How about discuss in chat? Waiting for your reply. Best regards.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 20 jours
(9 Commentaires)
3.6
avto35217

Dear sir, I'm sure that I can complete your project 'Graphical text to hex to text converter for Linux' as soon as possible. I am senior software developer and always provide fast service. I promise a high quality and Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 2 jours
(3 Commentaires)
3.2
kotalentsu

Hi, there. I read your project description carefully. I am linux expert. and so I have rich experience of c, c++ in [login to view URL] 10+ years. I will serve you kindly, so you will have a good result. Best regards.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(5 Commentaires)
3.2
lesula

I will adapt GHex exactly to your specifications. You said you have attached a copy of HD44780. Where is it? Did you mean this: [login to view URL]

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 10 jours
(8 Commentaires)
2.3
mkduga

Hi, I am very interested in helping you with this project. I have used GHex before. I do have a question--what do you mean when you say "interleaved" like wireshark? I have a lot of experience with conversions and e Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 14 jours
(1 Évaluation)
2.2
greenguru2018

Hello How are you? I've read carefully your job description. I have more than five years experience in Development. Your satisfaction with the project is my top priority! If you give me a chance to work with you, the Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(2 Commentaires)
1.6
Panggumsok

Hi, I'm C and C++ expert. I like to do c and cpp progrmming as it is interested for me. I've been programming with c language over 10 years. More harder problem, more interested! I'm very interested in your project a Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(5 Commentaires)
3.1
fangovincent

Hi After long consideration, the best way to create the program you want is to fork gHex and make changes in it. Here is the changes I'd do Feature 1: translate characters from HD44780 Possible solution: Make change Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 12 jours
(1 Évaluation)
0.2
Anatoly1995

Hello, sir. I saw your proposal on freelancer site and understood your requirement well. I have 5+ year experience in C/C++ development under Linux and Windows and i am sure that i will satisfied your demand. I have Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(0 Commentaires)
0.0
rufw91

Bsc. Eng and Bsc IT Will provide full working solution before award. don't pay if it you don't like my work

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 10 jours
(0 Commentaires)
0.0