Fermé

FEM: FRP infilled with MASONARY wall

Job Description:

Required help to finished my report urgently, due to Covid have to take another approach.

The topic is to investigate the FRP I-section infilled by masonry wall under compressive/axial load (see the images attached to this file for modelling using abaqus).

Methodology part: Require to provided validation or verification that model that is carried are correct either by comparing with theoretically, analytically or other researchers work that they did experimentally etc. So the require to do researched of his own before carrying out modelling to validate also to what material properties parameter to input into the modelling.

Before I plan to do experiment to obtained parameters into FE software abaqus which I can't do anymore as facilities is closed and this was good source to validate results too.

I came up the way to validate by proposed that to treat two elements (of any of type selected material for Unreinforced masonry wall and FRP) in FE (abaqus) separately, do not combine them beginning. Then validate two of those element separately by other researchers work or theoretically using codes. So people with experience in modelling two element masonry wall and FRP using Abaqus is preferred alot. Also to type technical stuff about this.

Then finally, to combine them both together in simulation then carry out further researched. Then analysis the results and type the discussions.

Finally note this down, I expect the person to in touch with me daily basis as time is short to finished the work and when modelling team-viewer is required to use so that I can ask ask the questions and notice key things as well learn myself too (self recording screen is preferred too). By this I will know the works fulfil my requirement. As people tends say no and I know some random wrong work will be given to me and you may say it right, this will be unacceptable. I require your full co-operation and I am flexible the time to co-ordinate with you so that the work is carried out according your given time professionally. As I am new to this software and to this topic research, this way I will sure of the work produced other than blindly sit and wait.

I havent not decided the cost, I will pay the fixed price so negotiate with about it, I expect to finished within the one months time not more. So your full co-operation is significantly important

Compétences : Analyse d'éléments finis, Ingénierie, Rédaction scientifique, Abaqus

Concernant le client :
( 2 commentaires ) Manchester, United Kingdom

Nº du projet : #26485356

13 freelances font une offre moyenne de 494 £ pour ce travail

umg536

Hi there, I'm bidding on your project " FEM: FRP infilled with MASONARY wall " I am an expert Writer, I have worked for several years. Portfolios and reviews can be shown please leave a message on my chat so we can di Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 6 jours
(39 Commentaires)
6.8
liveexperts123

Hi there, I have read your project description and i'm confident i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 10 jours
(39 Commentaires)
6.2
anumali0987

Hey I can help you with your the FRP I-section infilled by masonry wall under compressive/axial load project, I have 6 years of experience in writing and currently enrolled in PhD program. I can share the sample of my Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% GBP en 1 jour
(114 Commentaires)
5.9
afzalwaqas94

Hi! Greetings! I am a Mechanical Engineer with expertise in Mechanical Design. I have done projects that include Design of Telescopic Knuckle Boom, Design of Steel Space Frame Chassis for Formula SAE Vehicle, Design of Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(49 Commentaires)
5.7
iamhamzazaki

Hey there,hoping you in good health I have read your project description about linking finite element analysis I have expertise at ansys,structural module,thermal and fluent,combination of both.I can also generate repo Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% GBP en 1 jour
(53 Commentaires)
5.4
gophaneishwar7

Hello, I am a mechanical graduate working as FEA engineer. I have checked all input files/details. I'd be very happy to discuss this further and get started for you as soon as possible. Technical skills: Analytical c Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(42 Commentaires)
5.2
doggar302

Hello there! Hope you are doing well! On checking the requirement from the description, I am confident that I can do this job successfully. I have a good experience and skills in the Engineering Finite Element Analysis Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(17 Commentaires)
5.3
MustafaFECFD

Hello I am a mechanical and aeronautical engineer with 5 years experience based on finite element method in aerospace industry. I am professionally using abaqus and modelled masonry wall, RC beams and steel structures Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 5 jours
(21 Commentaires)
5.2
PKonstiantyn

Hi Thank you for post job " FRP I-section infilled by masonry wall under compressive/axial load". I will provide good results. I'm a professional Mechanical Engineer, 3D Designer, and Inventor. I've completed a Masters Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 5 jours
(1 Évaluation)
1.8
stepinnsolution

Hello Sir, I have gone through the project detail and attached file and have few question in mind so reply me back then we will discuss all points in chat. Please check my portfolio: https://www.freelancer.com/u/stepin Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(0 Commentaires)
0.0
SinaAskarinejad

I have 10 years of experience working with abaqus. I am now a research associate at University of Cambridge. I am happy to help you with this project.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(0 Commentaires)
0.0