Correct NVR Camera Cabling On-Site

$100-150 USD / hour

Closed

Posted 7 days ago

$100-150 USD / hour

The security feed at my construction site in San Diego, CA is down because the data switch and the NVR switch were re-wired in reverse after recent works. More than 10 IP cameras are now patched into the wrong switch ports, while the NVR is sitting on the data network. I need someone to visit the site, trace every run, and put each cable back where it belongs so the cameras are once again visible in the NVR interface. This is just changing cables, no tools are required. It would be good to bring a data test tool or toner in case there is some unknown/errant cable we need to identify.

Field Technical Support

Troubleshooting

Local Job

Project ID: 40484573

About the project

3 proposals

Active 4 hours ago

Location: San Diego, United States

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

3 freelancers are bidding on average $100 USD/hour for this job

@hiroo2

Hi there, this is Hiro from U.S. I have experience with IP camera systems, network patching, NVR configurations, and structured cabling troubleshooting in commercial and construction-site environments. I can help trace and reorganize the camera and data switch connections at your San Diego site so the IP cameras are correctly routed back to the NVR network and fully restored within the recording interface. I’m comfortable working with mislabeled or reversed patching scenarios, verifying cable paths, and identifying unknown runs using basic network testing or toning equipment if needed. The focus would be restoring stable camera visibility, correcting switch assignments, and ensuring the surveillance network is organized cleanly for future maintenance. Regards, Hiro

$100 USD in 1 day

0.0

(0 reviews)

0.0

@oscar746

Hello, I can help restore your CCTV system by correctly tracing and re-terminating the network runs between the data switch, NVR switch, and IP cameras at your San Diego construction site. I have experience with IP camera networks and structured cabling, and I understand how mispatched switches can disrupt NVR visibility. I will carefully identify each run, verify connections, and restore the correct topology so all cameras are properly recognized in the NVR interface. I can also bring basic network testing tools (cable toner/tester) to identify any unclear or mislabelled lines and ensure everything is correctly mapped before finalizing the setup. The goal will be a clean, fully functional camera system with all feeds restored and properly organized. I’m available to visit the site and can coordinate timing as needed. Best regards,

$150 USD in 3 days