Terminé

STM32F103RBT6 + 2.8" TFT Programming

Main CPU Board: Development board : MINI V3 STM32F103RBT6(development board ) with 2.8" TFT-module (Brought from Ebay)

TFT: 2.8 "TFT LCD Module (ILI9325) with Touch Panel

SD card: Not required

NAND Flash: Not Required

Add Module: AD7190 interface through SPI

Digital Inputs: 2 Nos

Digital Outputs: 4 Nos

The CPU has to load the Welcome screen for a few seconds, after that the main screen should be load.

The main screen contains a Numeric display value of the AD7190.

Four set points has to be entered under program no.

The corresponding outputs and four on screen indication should be goes High/LOW, corresponding to the set values compared to the current value.

A numeric keypad has to be appear once the numeric input is clicked. The entered value has to be stored in the EEPROM and the values should be loaded whenever reset occurs or power on.

Programmer no need to put any functions of calibration screen, Communication screen, settings screen, but the screen has to be exist as it is

Updated Project requirement. Read carefully, Expecting open Bid.

Compétences : Programmation C++, Logiciels Embarqués, Ingénierie, Microcontrôleur

en voir plus : spi programming, spi engineering, programming board, eeprom programming, digital programming, c programming power, TFT, spi display, rbt, nand, calibration, flash interface touch screen, ebay module, numeric keypad, card programming, digital interface flash, program eeprom, loaded ebay, touch screen flash, lcd panel touch panel

Concernant l'employeur :
( 5 commentaires ) Coimbatore, India

Nº du projet : #7350430

Décerné à:

yaresoft

I have a project that is almost the same with yours. so I can finish your project in 1 to 2 days. Please contact me.

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 2 jours
(5 Commentaires)
4.3

6 freelance font une offre moyenne de $158 pour ce travail

Anthony989

Hello Sir, I am a full time working freelancer and I am available on freelancer most of times and I can provide you the required prototype as you want it. I have very good feedbac Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(40 Commentaires)
6.1
anatolyzimin

I did update my bid, after review the new requreiments about display menu. Feel free for any qoestions.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(11 Commentaires)
4.5
abdjan1

A proposal has not yet been provided

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(15 Commentaires)
4.0
omarabdelmalek

Aucune proposition n'a encore été fournie.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 4 jours
(0 Commentaires)
0.0
aepsupport

HI if we used input method with touch pad then it must required one time calibration after that it will store in flash memory for next time. & we have all parts are ready with coding. we like to hear furth Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 10 jours
(0 Commentaires)
0.0