Electrical System Review/rectify for the Design of Recycling Line

@mesutgode

Hello I am not writing long texts which is generated by AI. I am experienced automation engineer. You can check my portfolio and we can discuss details. Thank you

@rashidamjad

As an electrical engineer with a strong focus on systems and full-stack development, I'm highly proficient in Australian electrical design standards and have a meticulous understanding of the specific requirements for this project. My past experiences include working on waste paper processing equipment designs, which gives me an edge in effectively reviewing and rectifying your present system to accentuate your production line's efficiency. One of my key strengths lies in control systems and detailed engineering design, which aligns precisely with your expectations. Be it single line diagrams, MCC power review, cable sizing calculations or voltage drop analysis - I've all your bases covered. I am adept at using Electrical CAD software for BMS and proficient in delivering required documentations with Australian standard Electrical Drawings including-Termination drawings, Instrumentation Drawings and many more. Additionally, having a dominant background in automation and embedded systems sets me apart for this project. Understanding the complexity of integrating different technologies seamlessly which is quintessential for your project tasks like Pre-commissioning & Commissioning Documentation and QAQC Services. Collaborating with a small technical team leaves us flexible yet disciplined enough to ensure deliveries remain consistent with high quality.

@leonidye

Hi, I can support the detailed review, rectification, and documentation of the electrical and control system design for your waste paper recycling production line to align with Australian Standards and project requirements. I have experience with industrial electrical design, control panel/MCC review, power distribution, motor control circuits, VSD/DOL systems, cable sizing, voltage drop calculations, earthing, instrumentation loops, PLC I/O schedules, and commissioning documentation for process equipment. For this project, I can review the existing China-designed system, identify compliance or design gaps, and prepare corrected documentation covering SLDs, MCC schematics, power/control drawings, cable schedules, termination drawings, I/O lists, loop diagrams, and control architecture. I can also assist with QA/QC documentation, FAT/SAT templates, pre-commissioning check sheets, motor rotation tests, megger test forms, VSD commissioning procedures, and handover documentation. My approach would start with reviewing the existing drawings, equipment list, MCC/BMSB interfaces, field instruments, motor/VSD data, and utility/site requirements, then developing an Australian-standard design package suitable for review by the client, panel builder, and commissioning team. I am ready to start after receiving the existing electrical drawings, equipment schedules, panel drawings, control philosophy, and any Australian client/utility standards that must be followed. Regards.

@moizam1

Hy friend, I just read your post and I get exactly what you need. You're looking for a detailed review and design work for the electrical system of a waste paper recycling production line, ensuring it meets Australian standards. Here's how I'd do it: I'll leverage my expertise in Australian electrical design and control systems to review and rectify your existing designs, including control panels and integration with BMSB, MCC, and field equipment. I'll provide comprehensive documentation including SLDs, power distribution schematics, and detailed calculations for cable sizing and fault levels. Here are a few similar builds I've done: ✔️ [Link to relevant project 1] ✔️ [Link to relevant project 2] ✔️ [Link to relevant project 3] What you'll get: - Complete compliance with Australian electrical standards - Thorough design review and rectification of control systems - Detailed documentation including all necessary schematics and schedules Where I'm strong: - Australian electrical engineering - Control systems design - Waste processing equipment expertise Happy to jump on a quick call and show you how this would run for your setup. Best, Moizam Bilal

@eslamsaeid1991

Hello sir, I am electrical engineer. have 11 years experience in design field. i am aware with all deliverables mentioned from your side. please check my portfolio and clients reviews. Thanks Eslam

@mobiwebsolutions

✋ Hi There!!! ✋ The Goal of the project:- REVIEW, RECTIFY AND OPTIMIZE THE ELECTRICAL DESIGN OF A WASTE PAPER RECYCLING LINE TO MEET AUSTRALIAN STANDARDS INCLUDING MCC, BMSB AND FIELD CONTROL SYSTEM INTEGRATION I have carefully reviewed your complete requirement including SLD design, MCC review, cable sizing, protection coordination, instrumentation loops, earthing, QAQC documentation, and full commissioning support aligned with Australian electrical standards. I am the best fit for this project because I specialize in industrial electrical design review, control systems engineering, and compliance-driven correction of complex plant automation systems. 3 key points I will deliver exactly as required: 1. Full electrical system review including SLD, MCC, DOL motors, cable sizing, and fault level analysis 2. Instrumentation and control system validation including loop diagrams, PLC I/O schedules, and termination design 3. QAQC and commissioning documentation including FAT/SAT templates, testing procedures, and IFC drawing packages I will provide engineering design review, documentation correction, QAQC validation, testing procedures, and full source/drawing deliverables with structured reports. I have 9+ years experience as a full stack and industrial systems engineer working on electrical design review, automation systems, and heavy industrial commissioning projects. Looking forward to chat with you for make a deal Best Regards Elisha Mariam

@cesur135

With a robust background in the design and implementation of electrical systems for a variety of industrial projects, I believe I would be the ideal candidate to perform the requested Electrical System Review on your waste paper recycling production line. My experience includes, but is not limited to, wastewater treatment plants, water treatment plants, and HES projects which aligns perfectly with this task you require. Throughout my career I have worked to meet stringent control standards while ensuring maximum power efficiency as highlighted in your project. Additionally, I have a length of experience working in power distribution settings such as MCCs and BMSB; factors crucial to the process flow of your recycling line. As an engineer familiar with Australian Standards, I am well versed in the calculations required for maximum demand, voltage drops and fault levels - critical elements for any intricate electrical system like yours. Finally, testament to my attention to detail and dedication to getting a job right first time, every time are my comprehensive deliverables.

@engrhasan01

I have worked on industrial electrical and automation projects involving MCCs, motor control systems, PLC/VSD integration, power distribution, and detailed engineering documentation for manufacturing and process plants. Your project aligns well with my experience reviewing existing overseas designs and bringing them into compliance with local engineering standards and commissioning requirements. Scope I Can Support: Maximum demand calculations and SLD development Power distribution review and design verification MCC, DOL, and VSD control schematic review Cable sizing, voltage drop, and fault-level calculations Earthing and bonding design Instrumentation and PLC I/O review Cable routing, ladder, and support layout design QA/QC review and IFC package preparation FAT/SAT documentation and commissioning procedures Deliverables: Australian-standard electrical drawings (SLDs, MCCs, schematics, layouts) Instrumentation and control documentation Load schedules, cable schedules, and termination drawings Functional Design Specification and Control Philosophy QA/QC records and IFC package Pre-commissioning and commissioning dossiers Controlled PDF/DWG deliverables Before commencement, I would review the existing Chinese drawings, MCC documentation, protection studies, equipment schedules, and PLC architecture to assess the scope of rectification required and provide an accurate timeline. Best regards, Hasan

@Zawiya3

I am excited to submit my proposal for the Electrical System Review and Rectification of your Recycling Line design. With experience in industrial electrical systems, automation, power distribution, and control panel design, I can thoroughly assess the existing electrical architecture to identify design flaws, safety concerns, compliance issues, and operational inefficiencies. My approach focuses on ensuring a reliable, safe, and scalable system that supports continuous recycling plant operations. I will perform a detailed review of electrical schematics, load calculations, motor control circuits, protection coordination, cable sizing, grounding systems, and PLC/control interfaces. Any deficiencies or design inconsistencies will be documented and corrected according to applicable industry standards and project requirements. I can also provide recommendations to improve system performance, energy efficiency, maintainability, and future expansion capabilities. In addition to delivering revised electrical documentation, I will work closely with your engineering team to ensure all modifications integrate seamlessly with the mechanical and process design of the recycling line. My goal is to provide a technically sound and fully validated electrical solution that minimizes downtime, reduces risk, and supports long-term operational success. I look forward to discussing your project requirements in greater detail.

@ahmedassad902

Hello, I fully understand your needs, as I have previously worked on a project similar to your specifications. I am an experienced architect specializing in 3D design and rendering. I have extensive experience using AutoCAD, SketchUp, and Revit 2025, and I can deliver the required design drawings on time. I would be delighted to work on your project. I have carefully reviewed your project details. If you choose me, your project will be completed quickly and to a high standard. Thank you for your interest.

@Specgi

Hello, I am an experienced electrical engineer with a strong background in industrial automation, power distribution, and electrical system design for manufacturing and processing facilities. I can review your recycling line electrical design, identify potential issues, and provide practical rectifications to ensure the system operates safely, efficiently, and in compliance with relevant industry standards. My expertise includes electrical load calculations, motor control systems, MCC and control panel design, cable sizing, protection coordination, PLC integration, and troubleshooting complex industrial systems. I will thoroughly evaluate the existing design documentation, schematics, and equipment specifications to verify performance, reliability, and maintainability while recommending any necessary improvements. I am committed to delivering a detailed and accurate review with clear recommendations that support the successful implementation of your recycling line. Whether the project requires design validation, optimization, or corrective modifications, I will work closely with your team to ensure the electrical system meets operational requirements and project objectives. I look forward to contributing to the success of your project.

@shadabkhan92

Hi Done similar tasks https://www.freelancer.com/projects/telecommunications-engineering/Voice-Gateway-With-DTMF/ Price will increase as per phases, Phase 1 — Design Basis & Gap Assessment (Weeks 1–2) Review of all existing design documentation against the applicable Australian Standards (AS/NZS 3000 series, AS/NZS 3008, AS/NZS 61439, AS 60204.1 and related). Establish the project design basis: supply authority parameters, site conditions, load list verification. Deliverable: Gap Assessment Report identifying every non-conformance, ranked by criticality, with a rectification register. This report becomes the agreed scope baseline for Phase 2 — so there are no surprises on rework volume later. Phase 2 — Power System Design & Rectification (Weeks 3–6) Maximum demand calculations, single line diagrams for BMSB-1/2 and all MCCs, cable sizing and voltage drop calculations, fault level review and protection coordination philosophy, earthing and bonding design. Deliverables issued progressively for client review at IFR (Issued For Review) status. Phase 3 — Control System & Instrumentation Rectification (Weeks 5–8, overlapping) MCC control schematics, DOL and VSD motor control design rectification, instrument loop diagrams, JB and termination schedules, PLC I/O schedules, control architecture, functional design specification and control philosophy. Field interfaces (fire system, lighting/small power) closed out in this phase. I will share all phases as drafted doc

@revival786

Greetings! I will review and rectify your waste paper recycling line's electrical design including maximum demand, power distribution, MCC control, cable sizing, voltage drop, fault level, earthing, lighting, fire interfaces, instrument loops, cable routing, and ladder supports. I will provide SLDs, schematics, layouts, schedules, termination drawings, I O schedules, and full QAQC, pre commissioning, and commissioning documentation. Send your existing drawings and testing results. Thanks, Revival

@sekai1116

Coming from an Australian Electrical engineering background and with extensive experience in control systems, I have the precise skills needed for your project. My expertise includes Circuit Design and Electrical Engineering which are integral to your requirement. Moreover, my experience with waste paper processing equipment design further strengthens my familiarity with the field and specific Australian electrical standards. Having worked on comprehensive projects similar to yours, I am well-versed in each aspect you enumerated. My proficiency goes beyond just designing but also extends to reviewing and rectifying complex electrical systems such as control panels, which is a critical component of your recycling line. From DOL motor control design to voltage drop calculations, I can confidently undertake any task outlined in your project description. Furthermore, my commitment to thoroughness will be evident in the quality of deliverables you will receive. In addition to designing the necessary schematics and diagrams. With me on board, you can be assured of a meticulous approach towards your Electrical System Review/Rectify project for the Recycling Line. Combining expertise, experience, and commitment to ensuring an efficient and compliant system while being within the given time frame makes me an ideal candidate for this role. Looking forward to discussing further how I can add value to your project.

@arilrivenski

Hello, I am excited to submit my proposal for the electrical system review and design of your recycling line. With a solid background in electrical engineering and extensive experience in automation, I understand the complexities involved in ensuring compliance with Australian standards. My approach will involve meticulously reviewing the existing control panel designs, integrating the necessary components with BMSB, MCC, and field equipment. I will conduct detailed analyses of maximum demand, cable sizing, and voltage drop calculations to guarantee optimal performance. Additionally, I will prepare all required documentation, including Single Line Diagrams and power distribution schematics, tailored to your specifications. I am available for real-time communication according to your time zone and can provide a simple demo or a portion of the project within 12 hours of commencement. Q1: What is the timeline you're envisioning for the completion of this project? Q2: Are there any specific challenges you've encountered with the current design? Q3: How often would you prefer to have updates throughout the project? Thanks, Aril

@mayr81

Hello, and thank you for the opportunity to support your recycling line electrical system review/rectification. I’m Cora May, and I provide Australian Standard-aligned electrical design and documentation review, with strong experience verifying control panel/MCC arrangements and integrating power and control with building management and field equipment. For your China-designed and tested system, I will review single line diagrams, power distribution from BMSB-1/BMSB-2 to MCCs and equipment, DOL and remaining motor control schemes, VSD power/control where applicable, and instrument loop termination/IO schedules to ensure compliance and buildability. I’ll also complete or verify cable sizing, voltage drop, fault level and protection coordination philosophy, earthing and bonding, lighting/small power interfaces, fire system electrical interfaces, and cable routing/ladder support layouts. QAQC review will include internal engineering review, drafting verification, design verification, and controlled IFC package preparation, followed by commissioning and pre-commissioning documentation such as loop checks, megger/functional test sheets, and handover dossiers. To tailor the review precisely, could you confirm what Australian Standards set you’re targeting (e.g., AS/NZS 3000, AS/NZS 3008, AS/NZS 60947 series), and which MCCs/VSDs are present (brand/model) for the integration with BMSB and PLC I/O?

@rbtech1984

Hi There!!! ★★★★ ( AS3000 electrical design review and rectification for a waste paper recycling line ) ★★★★ You need an experienced engineer to review and rectify a Chinese-designed electrical system for a paper recycling line, converting control panels, MCCs, VSD circuits, and instrument loops to meet strict Australian Standards while preparing complete IFC packages. ⚜ Maximum demand, cable sizing, and voltage drop calculation analysis to Australian Standards ⚜ Power distribution schematic design reviews from BMSB-1 and BMSB-2 paths ⚜ MCC single line diagrams and DOL motor control loop rectifications ⚜ Cable ladder layouts, routing diagrams, and earthing bonding designs ⚜ Instrument loop diagrams, JB termination schedules, and PLC I/O architectures ⚜ QAQC design verification with formal IFC package document control management I have completed several complex power distribution audits and schematic review layouts before, and I love engineering compliant, safe systems that bridge international factory builds with local regulatory codes perfectly. My plan is to audit your tested diagrams against AS3000 rules first. I will recalculate fault protection coordination levels, rectify your control panel wiring drawings using advanced circuit tools, structure your loop check documentation templates, and compile the entire indexed MDR dossier for a smooth on-site commissioning phase. Warm Regards, Farhin B.

@susiek9705

Hi, there. I’m Susie Kalson, an electrical engineer with over 7 years of experience in designing and reviewing complex electrical systems. I understand the critical need for compliance with Australian standards for your recycling line. Ensuring the design functions efficiently and integrates seamlessly with existing systems is paramount to avoid costly delays and operational failures. ✅ Perform a thorough review of the control panel designs to ensure compliance with Australian electrical standards. ✅ Rectify any discrepancies in the MCC power and control systems to enhance reliability. ✅ Execute maximum demand calculations and develop detailed single-line diagrams (SLDs). ✅ Oversee cable sizing and voltage drop calculations to optimize performance. ✅ Create comprehensive documentation, including functional design specifications and QAQC records. I leverage tools like AutoCAD and ETAP for circuit design and analysis. My experience with waste paper processing equipment enables me to address your specific challenges effectively. I am looking forward to work with you. Best Regards, Susie Kalson

@Foraxis

⭐ I handled a similar project ⭐, Happy to show you what works before you commit. I successfully built a waste paper recycling production line electrical system, aligning with Australian standards, enhancing control panels, and integrating with BMSB, MCC, and field equipment. In perfect alignment with your project needs, my expertise lies in Australian electrical design, detailed engineering, and focus on electrical systems. Understanding the project's complexity, my specialization in performance, security, and a polished user experience ensures optimal outcomes. Worst case, you walk away with a free consultation and a clearer understanding of your project. Kind regards, Curtley