Annulé

Bias Network Design using Cadence Spectre (Analog Integrated Circuit Design)

Design a bias network using Cadence Spectre (or other CAD software as longs as I can easily follow your steps).

Must generate a 10uA current with gm = 100uS that cannot vary by more than +-10% over -40 C to 130 C or supply variations of +-10% with a nominal 1.8V supply. You come up with the idea of using a constant gm bias circuit to bias the amplifier. Design the bias network and determine the dimensions of all transistors. Due to area constraints, you can only use a resistor up to 40K Ohms and a maximum L of 10um. Also, do not forget that K > 20 is forbidden and your circuit needs a startup circuit! (Hint: Consider using m=4 to simplify your equations.)

What is required:

1) Schematic annotated with the operating point (THIS ONE IS THE MOST IMPORTANT ONE)

2) Transient Simulation showing correct startup (ramp VDD from 0 to 1.8V)

3) Sweeps showing that gm is stable over the temperature and voltage range.

DEADLINE:

November 14, 2018 @ 4:00 AM PST (San Diego, California, United States of America)

I will give more details to those who bid.

Compétences : Design de circuits, Génie Électrique, Electronique, Ingénierie

en voir plus : create network using nntool, list affiliate network using direct track, vlsi projects using cadence, neural network using nntool, cracking wep encryption network using kismac pdf, social network using aspnet, affiliate network using directtrack, connecting attendance machine via network using, can crack wpa network using osx, stereo analog meter circuit diagram, cmos analogue integrated circuit problem, mesh network using java, vlsi circuit design using verilog, project voice network using opnet, security network using snmp, connecting nodes network using matlab, social network using jsp, electrical network using etap, social network using codeigniter, integrated circuit design

Concernant l'employeur :
( 20 commentaires ) San Diego, United States

Nº du projet : #18155456

3 freelance font une offre moyenne de $60 pour ce travail

rubelsarkar161

Hi there, If you can increase deadline one more day, I can complete your project as I do already have a designed one. Just need some modification Soft: # Cadence Virtuoso # ADE L (spectre) TSMC 130/180 nm PDK

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(2 Commentaires)
3.2
EEngineerr

Hi I'm an electronic engineer and do have required skills and experience of accomplishing such jobs. 1- What device should be used in the design, BJT or MOSFET? 2- For What amplifier the bias network will be used? 3- Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(2 Commentaires)
3.0
ShilpaMehta1987

If you look to my profile you will find the I am electronics simulation software expert and have worked on many softwares.

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(1 Évaluation)
0.6