Waste Water Recycle Skid Design - Solidworks

Project Scope:

To design a steel fabricated skid using SolidWorks ("Weldments" and Sheet Metal) which will contain a number of wastewater recycling components in line with provided design parameters. Four possible solutions will be presented. Each Skid design will contain all required components and be fully plumbed with pipe work (Georg Fischer Piping) using the SolidWorks Routing facility. All major SolidWorks solid models will be provided for use in the design process. It will be necessary for the candidate to use their own Georg Fischer pipe and fittings library (or similar) suitable for the Routing facility in SolidWorks. A P&ID diagram will also be provided for connections and minor piping component placement. All steel members must be selected to be suitable to support necessary loads and forces, with required Stress Analysis performed and test data presented with the models. All steel profiles chosen must be commonly available in Australia. The most suitable design of the four will be further developed and full manufacturing drawings for the fabricated skid will then be produced as part of the project. These drawings must be produced to Australian Standard AS 1100. Further work may be available to the successful candidate who produces a high standard of work.

Compétences : Ingénierie, Dessin en Ingénierie, Design industriel, Solidworks, Génie des Structures

en voir plus : skid design solidworks, waste skid, support skid design, solidworks waste water, steel skid design, drawings waste water recycle, solidworks wastewater, work available in australia, water engineering australia, water design, the engineering design process, stress analysis in solidworks, solidworks for industrial design, Process piping design, process engineering australia, piping design work, pipe line drawings, metal design, line manufacturing process, it support australia, industrial engineering australia, industrial design work, industrial design process, industrial design major, industrial design in australia

Concernant l'employeur :
( 3 commentaires ) Melbourne, Australia

Nº du projet : #2375272

Décerné à:


Dear sir I have 2.5yrs experience in solidworks in fabrication(oil and natural gas),skid,3d plant makin etc.. so i will do [url removed, login to view] you trust me and give me chance. Thanks & Regards Ritesh Kumar skype i Plus

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 25 jours
(0 Commentaires)

I can provide all your requirements.

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 4 jours
(0 Commentaires)

Mechanical/Mechatronic engineer with good experience in 3d Cad/cam design software. Able to do this work for you

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 7 jours
(2 Commentaires)

14 freelance font une offre moyenne de $521 pour ce travail


Please check my private message.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 30 jours
(33 Commentaires)

Dear Sir or Madam, I am professional designer with over 15 years of experience. Willing to do this project for you. Regards

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(40 Commentaires)

we are Team of Experts , please read my message

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(9 Commentaires)

Dear Sir, We are mechanical engineers and have experienced CAD/CAM. We will be able to conduct your project in 2D/3D with Solidworks in a timely manner.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 30 jours
(3 Commentaires)

Ready to start, Pls check our PMS.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 18 jours
(8 Commentaires)

We will work according to Australian Standards. Mango Solidworks CAD-Lancer Tempe,AZ, US

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 14 jours
(1 Évaluation)

We are SolidWorks Certified Professionals with all SolidWorks range of products certifications including Simulation and PDM. Please visit [url removed, login to view] for more info. We used legal licensed software.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)

I am mechanical and structural Draftsman-Design. And I am interested in your job posted

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 14 jours
(0 Commentaires)

I will support you. Please see my PM also.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 10 jours
(0 Commentaires)

Dear Sir/Madam, I am experienced product designer and have more than 3 years of experience. I am ready to work on this project. Please see my portfolio. Sincerely, Asif Ahmed

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(0 Commentaires)

Mechanical engineer worked on such projects before master of CAD softwares like solidworks ,catia,autocad and well versed with ansys too

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)

Please refer to private message

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(0 Commentaires)