Electronics & Embedded Systems Design – Arduino, ESP32 & PCB

@Mahihassi

As an experienced and dedicated Electrical Engineer with a Master's in Embedded Systems, I have specialized knowledge and expertise that aligns perfectly with your project needs. My extensive proficiency with Arduino, ESP32, microcontroller programming, and PCB design is complemented by my strong ability in Proteus simulation, firmware development, troubleshooting, and testing. Over the years, I've leveraged my skills to develop robust embedded solutions that combine hardware, software and intelligent connectivity. From system architecture & schematics to firmware development and PCB design – my approach follows a full product development workflow. I believe in providing innovative solutions; taking your ideas from just being concepts to real-life products ready for the market. Moreover, my diverse exposure in fields such as AI/ML (for edge devices), Robotics & Control (for industrial automation), and Biomedical Instrumentation further enriches my capabilities. All these experiences render me capable of not only understanding technical requirements but proposing efficient solutions while developing all required hardware/software.

@MuhammadUzair16

Hi, I am an embedded systems engineer with over 16 years of experience developing consumer electronics from concept through production, including circuit and PCB design, Arduino/ESP32 firmware, simulation, bring-up, testing, and troubleshooting. I can turn your requirements into a practical hardware and firmware solution, then provide the schematics, source code, PCB and Proteus files where needed, BOM, and clear technical documentation. My relevant work includes ESP32-connected devices, custom microcontroller boards, sensor and control systems, and production-ready PCB designs. Much of this work is private and cannot be shared publicly, but I can show suitable examples privately. Once I review the exact application, interfaces, power requirements, and expected operating conditions, I can propose the architecture and confirm milestones. What is the first device or system you would like to develop? I would be happy to discuss the details and recommend the best approach.

@engrusmanfaiz

Hi, This is a very good match for my background. I have 10+ years of hands-on experience in electronics, embedded systems, PCB design, Arduino/ESP32, STM32, firmware, and troubleshooting. I can handle projects from circuit concept → schematic → simulation → PCB → firmware → testing, rather than working on only one part of the system. I’m experienced with KiCad, Altium, Proteus, C/C++, ESP32, Arduino, STM32, sensors, IoT, UART/I²C/SPI/CAN/RS485, and various hardware interfaces. I can provide complete source files, BOM, firmware, simulation files, documentation, and testing support. If you have an upcoming project, send me the requirements and I’ll suggest the most practical architecture and development approach.

@markoa7

Hello! With my experience straddling electronics design, embedded systems and firmware development, I am suitably equipped to handle your project's technical requirements. I've got a particular affinity for PCB design and have demonstrated this in the development of reliable, high-performance boards throughout my career. Moreover, I'm well-versed in power supply circuits (DC-DC, AC-DC conversions) and multilayer designs for embedded systems – an added mastery that could come in handy for your project! My code-slinging abilities are not restricted to any single microcontroller. I'm proficient in several including STM32, DSPIC, ESP32 and ESP8266 - which is why UART, SPI, Ethernet, USB, CAN and MODBUS aren't just letters jumbled together to me; they're communication protocols whose seamless integration I deeply understand. Lastly, if there's one capability that has consistently stood me out it would undoubtedly be my skill with wireless technologies including Wi-Fi, Bluetooth, and ZigBee. I believe that no project is too daunting – from circuit design through Arduino/ESP32 development to PCB layouts – let me transform your ideas into existing realities today!

@RaspberryOculus

When it comes to complex electronics and embedded systems projects, my 27 years of experience as a Systems Architect have prepared me to handle just about anything. Having worked on projects like the Fiber Glass submarine for military use and even actively combatting rovers, I've honed my skills in areas directly applicable to your project. I'm well-versed in Arduino, ESP32, PCB design, circuit design, Proteus simulation and more - all skills that align perfectly with your needs. Moreover, in addition to having the technical know-how, I take immense pride in providing clients with clear and comprehensive documentation to support present and future needs. As an engineer who understands the value of efficient systems that just work, I'm committed to leveraging my expertise to find practical solutions for your project's unique challenges. Finally, I treat every project as an opportunity for continued growth and my commitment extends beyond delivering the final product. I'll not only provide you with complete project files and comprehensive technical documentation but also offer you any support necessary even after project completion. So let's team up and turn your ideas into successful realities!

@Adeel2k14

I design production-ready hardware and firmware, specializing in multi-layer PCB design, ESP32/Arduino integration, and power management. From schematic capture and high-frequency digital routing to firmware state logic, I deliver optimized, reliable systems. Key Expertise: EDA Tools: Altium Designer, KiCad, EasyEDA, LTspice, Proteus. Microcontrollers: ESP32 (S3/C3/MINI), STM32, nRF52/53 series, RP2040. Hardware: Multi-layer PCBs, high-efficiency buck regulators, VFD/LED matrix drivers, SPI/UART interface buses. Deliverables: Complete schematics, PCB manufacturing files (GERBER/BOM/CPL), tested firmware, Proteus simulations, and thorough technical documentation. Let's discuss your specific project requirements, timeline, and deliverables!

@hayteekeys

HI, KINDLY READ THROUGH MY PROPOSAL I will support the full design and development of your electronic and embedded systems projects covering circuit design, Arduino/ESP32 firmware, PCB layout, simulation, testing and clear documentation. MY APPROACH ✅ Understand your technical requirements and propose an efficient solution ✅ Develop schematics, firmware and PCB designs as needed ✅ Provide simulation, BOM, testing support and complete project files RELEVANT EXPERIENCE Multiple projects involving ESP32/Arduino firmware, sensor integration, multi-layer PCB design, Proteus simulation and industrial/embedded control systems. DELIVERABLES - Complete circuit schematic - Source code / firmware - PCB files (when required) - Simulation files, BOM and technical documentation - Testing and troubleshooting support QUESTION 1. What is the first specific project or priority task you would like to start with? 2. Preferred tools (KiCad, Altium, Arduino IDE, ESP-IDF, etc.)? Ready to start immediately once we discuss the exact requirements, budget and timeline.

@hayat38402

Hello, I am Muhammad Javed, an electrical/electronics engineer with more than 10 years of experience in circuit design, Arduino, ESP32, microcontrollers, PCB design, embedded systems, firmware development, simulation, and troubleshooting. I can support your electronics projects from initial requirements through hardware development, firmware, simulation, testing, and final documentation. I can design complete schematics, develop Arduino/ESP32 and microcontroller firmware, create PCB layouts, prepare Proteus simulations, and troubleshoot both hardware and software issues. My approach is to first understand the functional requirements and constraints, then propose a reliable and cost-effective architecture before proceeding with implementation. I will ensure proper component selection, power management, signal integrity, protection, and practical manufacturability. Depending on the project, I can provide complete source code, editable schematic/PCB files, Proteus simulation files, BOM, component specifications, test results, and clear technical documentation. I am also comfortable debugging existing prototypes and identifying issues through systematic testing. I have worked on a wide range of embedded and electronics projects and can provide relevant examples of previous Arduino, ESP32, PCB, and microcontroller work. I am available for both individual projects and ongoing technical collaboration.

@leonidye

Hi, I can support your electronics and embedded development projects from initial requirements through schematic, firmware, PCB design, simulation, testing, and final documentation. I have hands-on experience with Arduino, ESP32, STM32 and embedded systems, including sensor integration, communication interfaces, power circuits, troubleshooting, and PCB development. For each project, I can first review the requirements and propose a practical hardware architecture, then develop the schematic and PCB layout with appropriate component selection, protection, grounding, and manufacturability considerations. Where required, I can also create Proteus simulations, develop and debug firmware, and assist with prototype bring-up and troubleshooting. I can provide complete editable project files, source code, BOM/component information, Gerbers, simulation files, and clear technical documentation. I’m also comfortable debugging existing hardware/firmware and improving designs rather than starting from scratch. I focus on reliable, maintainable designs and clear communication throughout development. I would be happy to start with your first project and build a long-term working relationship. Please share the initial requirements, and I can review them and suggest the best technical approach. Regards,

@Mahmoud00Ibrahim

I’m an Electronics & Embedded Systems Engineer with experience in Arduino, ESP32, STM32, circuit design, PCB design, firmware development, Proteus simulation, and hardware troubleshooting. I can handle the complete project workflow from understanding the requirements and selecting the right components, to schematic design, simulation, PCB development, firmware, testing, and documentation. I have completed 50+ electronics and embedded projects, including custom ESP32/STM32 boards, IoT systems, motor controllers, power electronics, and multi-layer PCBs. I can provide all required source files, BOM, firmware, PCB/Gerber files, simulation files, and clear technical documentation. I’m ready to discuss your first project and propose the most practical and reliable solution. Best regards, Mahmoud

@shykhAbubakar

Hi, I am ready to support your electronics and embedded systems projects, including circuit and schematic design, Arduino and ESP32 development, PCB design, Proteus simulation, and firmware development with full troubleshooting and testing support, following IPC-2221 and IEC 61010-1 standards for clean, reliable, and safe designs. Project Deliverables: Complete circuit schematic Source code/firmware PCB files Simulation files BOM and component information Technical documentation Testing and troubleshooting support Could you please clarify: Q1: What sensors and actuators does the system need to interface with? Q2: Do you have any specific power supply or communication interface requirements? I have over 7 years of experience in electronics design, embedded systems, and PCB development. Similar projects I have done: ESP32-Based IoT Sensor Node with PCB Design Arduino Multi-Sensor Control Board with Firmware Development Software I can use: Arduino IDE / ESP-IDF  Proteus Altium Designer / KiCad My portfolio is attached below. I am ready to start immediately and look forward to receiving your project requirements. Thank you! Warm regards, Abubakar

@mahmoudralizadeh

Hi I am an Electronics Engineer with extensive experience in PCB Design, Embedded Systems, Firmware Development, FPGA, and VHDL. I have: • 8+ years of experience in PCB design and electronic circuit development • 6+ years of experience in Embedded Systems and Firmware Development • 4+ years of experience in FPGA and VHDL development PCB & Hardware Design • Analog and digital circuit design • Schematic and PCB layout • Multi-layer PCB design • Power electronics and DC-DC converters • SMPS and switching circuits • MOSFET/IGBT driver design • EMI/EMC considerations • Circuit simulation using LTspice and PSpice • Altium Designer Embedded Systems • STM32, ESP32, AVR/ATmega • Embedded C/C++ • STM32CubeMX / STM32CubeIDE • UART, SPI, I2C, USB • PWM, ADC, DAC, Timers and Interrupts • Sensor and actuator interfacing • Real-time control systems • Hardware/Firmware integration and debugging FPGA & VHDL • FPGA digital system design • VHDL/RTL development • Xilinx FPGA • FSM and digital logic design • Digital signal processing • High-speed digital interfaces • FPGA simulation, verification and debugging I can handle projects from concept and circuit design to PCB development, embedded firmware, FPGA/VHDL implementation, simulation, testing, and debugging. My focus is on developing reliable, manufacturable, and well-documented electronic systems, while maintaining close coordination between hardware, firmware, and FPGA components. I would be happy to provide relevant previous work and portfolio examples upon request.

@shadabkhan92

With great enthusiasm, I present myself as the ideal freelance candidate for your Electronics & Embedded Systems Design project. My name is MOHD SADAB, and my forte lies in both theoretical expertise and practical experience a range of areas, from circuit design to PCB layout, Arduino to ESP32 development and everything in between. Having worked primarily on real-life implementation rather than just prototypes or pilot projects, I understand the value of efficiency and reliability in electronic systems. This means I can not only propose suitable solutions, but also implement them in an effective manner where performance and endurance are prioritized without compromise. Additionally, my skill set extends beyond electronics itself. My proficiency across other vital areas like Odoo ERP, IoT hardware design, and web/mobile stack makes me a versatile choice to build smart technology systems that integrate well within existing workflows. From the get-go till final deployment, I'm able to ensure seamless functioning with thorough documentation and troubleshooting support. Let's join forces for a project that truly pushes boundaries; one that demands transformative AI solutions interacting with intricate hardware- where my passion and specialty shine the brightest!

@sakshis576

As an electronic enthusiast and a proficient PCB designer, I have honed my skills in Arduino, Circuit Design, Electronics and Embedded Systems over the years. My expertise alongside successful endeavor in previous projects aligns well with your requirements for this electronics and embedded systems design work using Arduino, ESP32, and PCB-layout experience. My solid understanding of the interplay between software and hardware components enables me to propose efficient solutions that will enhance the performance and reliability of your electronic projects. I am also well-versed in Proteus simulation, which comes handy in testing designs even before they are prototyped.

@edi45

Hi, i am embedded system engineer with 11 years of experience. I can help you build esp32 base product in from design the hardware, develop firmware, and bench test. I have esp32 low power device that runs on very low power for environmental sensor that you can check in my profile. Please let me know if you are interested

@julianm260

With over 8 years of experience as a Senior Electronics Engineer, I am confident in my ability to deliver on your project's demands. My proven track record in RF engineering and embedded systems design makes me the right fit for your electronics project. I am not only skilled in Arduino, circuit design, embedded systems, PCB layout, and electrical engineering, but I bring a comprehensive approach to my work. This involves designing, testing, and delivering robust hardware solutions. Whether it's developing C/C++/embedded firmware or conducting power electronics analysis, my end goal is always compliance with safety and performance standards. In addition to my technical prowess, I offer strong troubleshooting, system integration and project-management skills. I am highly efficient at carrying projects through all stages - from conception to implementation and strategic documentation. Furthermore, my ability to collaborate with multidisciplinary teams ensures that the final outcome considers all necessary aspects. Let's discuss further how my skills can contribute to your project's success.

@Zainrais0786

With extensive experience in Circuit Design and Embedded Systems I can help you with the design and development of electronic projects. Hi, I am Zain. My expertise includes • Embedded Systems • Firmware Development • C / C++ • Circuit Design • PCB Design • KiCAD / Altium • Mixed Signal PCB Designs • Simulations etc. Want to start early? Lets chat for further discussion Best regards

@nehasingh17

Hi, We at HardFault can support the complete electronics and embedded development cycle, from understanding your requirements and designing the circuit to firmware development, PCB design, simulation, testing, and troubleshooting. Our experience covers Arduino, ESP32, STM32 and other microcontrollers, along with sensor interfacing, communication protocols, power electronics, schematic/PCB design, and embedded firmware. We can provide clean schematics, production-ready PCB files, Proteus simulations where required, well-structured source code, BOM/component selection, testing support, and clear technical documentation. Rather than treating hardware and firmware separately, we focus on making the complete system work reliably together and can also troubleshoot or improve an existing prototype if needed. As a team, we can handle different parts of the project in parallel, which gives you better technical coverage and faster progress than relying on a single individual. We are also comfortable adapting to project-specific requirements and can share relevant examples of our previous electronics, ESP32, Arduino, PCB, and embedded systems work. Could you share the first project or existing prototype you would like us to review so we can suggest the most efficient hardware and firmware approach?

@alluankit01

Hi, I can support your electronics and embedded systems projects involving Arduino, ESP32, circuit design, PCB layout, firmware, simulation, troubleshooting, and documentation. My approach will be to first understand the exact technical requirements, power needs, sensors/modules, communication interfaces, enclosure limits, and testing expectations. Then I’ll propose a practical hardware/software solution and develop the required files step by step. I can help with: * Circuit and schematic design * Arduino / ESP32 firmware * Microcontroller programming * PCB design and layout * Proteus simulation * BOM and component selection * Hardware troubleshooting * Testing support * Technical documentation Deliverables: * Complete schematic * Source code / firmware * PCB files when required * Simulation files when required * BOM with component details * Setup and testing notes * Troubleshooting support I’ll focus on reliable design, clean code, practical component choices, and clear documentation so the project can be built, tested, and improved easily. Best regards Ankit