Fermé

Microchip PIC microprocessor software to control LCD, Keypad, USB, RTC and RS-232

Project Description: 2-Stage Project with 2 milestone payments.

1. ***The 1st stage of this project is completion of the board design (must use Orcad/Cadence software), which includes schematic, printed circuit board and Bills Of Materials. 1st milestone payment on successful completion of 1st stag

2. ***The 2nd stage of this project is coding the software with good documentation and 2nd milestone payment is made on successful completion of 2nd stage.

3. ***Functional block diagram of electronics (hardware) for this project to be provided to selected Freelancer.

4. Software design; preferably using 'C'

5. Software is for a Microchip PIC microprocessor (part number to be provided)

6. Selection of the the Microchip PIC microprocessor can be done by the our Freelancer, with the criteria that is works with Microchip's PIC 'EXPLORER 8' evaluation board.

7. We are looking for well-documented software.

8. The PIC needs to support

i) 8 input buttons/switches,

ii) a 2-line by 16 character per line LCD (14 pin parallel interface); part number to be provided.

iii) RS-232 communications for sending and receiving 8 bit data (no hand-shaking).

iv) Real Time Clock (RTC)

v) USB 2.0 (USB stick) interface with capability to read data from USB stick or write data to USB stick

9. The code needs to be well documented so that we can build it up ourselves.

Compétences : Electronique, Microcontrôleur, Génie Électrique, Programmation C, Verilog / VHDL

en voir plus : pic software graphic lcd, microchip pic ammeter, lcd graphic pic microprocessor, software control gui, pic development kit graphic lcd, pic controller software, software control masajes, software control led using usb port, summary usb pic microprocessor, microchip pic usb wireless adapter, microchip pic communication usb, pic microprocessor usb design sd card consulting, pic temperature control lcd control, microchip pic pal lcd, microchip pic usb midi, microchip pic programmer software, microchip pic usb tutorial

Concernant l'employeur :
( 4 commentaires ) markham, Canada

Nº du projet : #21700457

54 freelance font une offre moyenne de $664 pour ce travail

sagradoamicus

Hi I am experienced embedded system engineer with more than 11 years of experience. I can do PCB design and firmware both for you. Please get in touch to discuss the complete details discuss the price and timeline. R Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(240 Commentaires)
7.9
DreamCha

Thanks for sharing your project. I'm fully read the description, so that, I'm very interested to this project. As I'm a Senior Embedded System engineer, I have rich experiences in many embedded systems development, Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 8 jours
(39 Commentaires)
6.9
microembedded

HI there I am an electrical engineer with 8+ years of experience relayed to microchip controller. I can do the pcb design and coding for you. Let me know if you are interested.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 45 jours
(38 Commentaires)
6.4
ahmad5857

Hi Sir, We are expert in PIC programming and we use both code studio and mplab for programming PIC controllers. Lets talk to us on on this project. We are professional engineers and developers who do such projects fr Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 18 jours
(41 Commentaires)
6.6
xiaoqideng

Hi, how are you? Thanks for your project. I've read your description carefully, and I'm very interested in your job. I have been developing many firmware using many PIC such as PIC16, and PIC32 for 10 years. Please hav Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 18 jours
(50 Commentaires)
6.7
sofiadubina99

Dear Sir. How do you do? I have seen your description very carefully and posting to you my idea. you can see my many work history from my profile. If you give me a chance to interview, I'll explain in more detail and Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(34 Commentaires)
6.5
cpp2048

If you are interested then may I suggest you to go for STM32 MCU rather than PIC ? I have been working with various IP vendors but I like STM32 most as its having better support and pricing and being an ARM architectur Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(62 Commentaires)
6.2
ITPyramid85

Hello, I am software developer with enough experiences on C/C++, C#/.NET for 13 years. I can work by full time for your project and trying to satisfy the requirements. I am designing the project from scratch and struct Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(17 Commentaires)
6.1
quang102

....................................................................................................................................

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 15 jours
(35 Commentaires)
6.5
xaainulabideen

For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail. For more details inbox me so that we can discuss in detail.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(59 Commentaires)
6.2
AwaisChaudhry

Hi,. I have gone through the brief details mentioned on the job. I have done multiple jobs with C Programming, Electrical Engineering, Electronics, Microcontroller, Verilog / VHDL which are the skills required to get t Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(6 Commentaires)
5.9
CoherentTech123

Dear Sir, I am an expert with more than 15 years of experience in firmware development, prototyping and PCB Layouts. I have worked with 8-bit, 16-bit and 32-bit architectures developing ultra-low power d Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 10 jours
(49 Commentaires)
6.0
RushService

Feel fee to contact me for Microchip PIC microprocessor software to control LCD, Keypad, USB, RTC and RS-232 .Shoot me message to discuss further more details .We provide the comments,images,videos,demos and live s Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(28 Commentaires)
5.2
xiaoguang2018

Hello. I have experiences about PIC programming. I used the series of 8bit PIC. I know all the function that you said. I hope a cooperation with you. Regards.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(36 Commentaires)
5.5
MElizabethp

Hello, my name is Maria, I am an electronic engineer with a lot of experience in the development of Printed Circuit (PCB), using Arduino, Raspberry pi and Microchips. I have knowledge in the management of softwares suc Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 40 jours
(10 Commentaires)
5.4
leons01

Hello, We are a 14-year-old Electronics design and Manufacturing Company working as an IoT design partner for Toshiba Semiconductors, Avnet, WPG and many others. Our past product experiences include: - Communication Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(2 Commentaires)
4.7
(5 Commentaires)
4.7
Ivan927

Hello! I am very interested in your post project. i am really looking for this kind of project for a long time in freelancer since i have rich experience on it. I think this project is very suitable for me and i am su Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(7 Commentaires)
5.0
smartman7102

Please give me a chance!.I have many experience in PIC. I built USB+PIC+RTC+EEPROM project recently. And a lot of project built using PIC. I am mastering about PIC. Such as PIC16f877a+LCD1602+4*8 Keypad => calculator. Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(10 Commentaires)
4.1
ninestar801

Hi, I have gone through your requirements and I can do this task. The skills and resources needed for this project are in my genes. I can assure you for a complete professional work in given time [login to view URL] share comp Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(6 Commentaires)
4.1