I am about to build a small heat forming machine, used for 8x6 inch size plastic sheets (2mm thickness). Here are the production process, which defines the feature needed for controller:
1. Set the heater to certain temperature (around 300F);
2. Worker put a plastic sheet onto a metal holder, push a button, the holder (guided by a rail) will enter heater for 1 minute (adjustable);
3. Holder come out, and move down, let the softened plastic piece fall onto mold. At this time, the plastic sheet is like a upside down Taco Bell;
4. Two air pistons will press the plastic on the mold from both sides (left/right), to certain pressure (50 lb?), and hold there for 3 seconds;
5. Turn on the water pump, to spray water onto the plastic sheet (on the mold) to cool it down;
6. Air pistons release the mold, then worker will pick up the plastic parts from mold.
7. Blow the mold with air to cool it down.
8. Worker put another sheet and go to step 2, and repeat.
Note: The mold is fixed on platform, never moves.
I want someone who is really good at Arduino, to write the code for the whole process. Also need the code to be well structured, and all parameters easily adjustable (through a text file or excel file) by none technical worker.
This Freelancer also need to send me links of all components that I need to buy on eBay or other places. I will assemble the components myself in Chicago area.
Of cause he needs to provide good support after project finishes. And he may get more projects in future.
If he also knows general mechanical stuff, such as how to design such a machine, which heater should I buy, and air piston etc., that will be great. But this is not required. I can use my other engineer to do the mechanical design.
40 freelance font une offre moyenne de $303 pour ce travail
Hi, I hope you are doing well. I have expertise in Arduino embedded system programming and development. I have experience with temperature control system design. I have understood your project requirements would Plus
Hi Sir, we have read your project and all the 8 points, lets discuss with us more on it thanks We offer you our services for this project. we are able to give you very best solution on GPS system we are able to g Plus
Best knowledge on Arduino and have real time experience on Arduio UNO/MEGA board. I have written lots of code to make automation system. Also I have work for IoT device by using Wifi module ESP8266. Program has been wr Plus
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Arduino, Electronics, I have made many Arduino Projects, so I am sure I can do a good work for you. Plus
Greeting there , I could absolutely help you with your Arduino based heat forming machine project i am very excited work on your project and help you get it done in short time About my experience : https://www.y Plus
Hello. I have a experience for process control and Arduino. is the your assigment only program? or with drover board? I hope a cooperation with you. Regards.
Hi, I am a product designer and automation specialist who has thermoforming process experience. I designed hundreds of products for thermoforming. I built one thermoform machine in past. I have experience on what exa Plus
Hello! I can carry out your project. I have all the necessary equipment (microcontrollers and modules) in my studio. I've had experience in writing firmware for such devices. But In fact, I need a more detailed desc Plus
I have been building automated machines and systems using arduino, raspberrypi and other microcontrollers for a lot of different use cases. I am sure I can deliver the best result for your project.
dear employer, This is the project a like! A have a lot of experience with Arduino, see my reviews and I can build this for you and advise on hardware and will give support after implementation too. Of course I have Plus
Hello there, I am an Electrical Engineer by profession and have been doing Arduino projects for a while now. I have worked on many projects related to Automation of various mechanisms. I have recently provided an empl Plus
how r u/bro,,,,,this project is my speciality.I m dealing with arduino since 8 years. u will feel brotherhood as well.................................I m also interested in making moulding machines......
Hi, I am a mechanical design engineer, my 'normal' day job is designing and commissioning bespoke machinery for factories all over the world. I do design work and Arduino programming on Freelancer in my spare time. Plus
Hi. Interesting project. I have years of experience in the design of embedded control systems using arduino modules, as well as knowledge of pneumatic systems. Your explanation of the project has seemed very good, w Plus
hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 7 years in arduino and electronics
Hello, from your description I understand that the project is somewhere similar to this : [login to view URL] Background: I am vice-champion in an international robotics competition called Plus