Ouvert

BLDC Servo Motor Driver

I need someone with experience in motion technology and who has already worked on similar projects. We need to build a simple BLDC servo driver using step/dir signal for position and as a feedback to use an quadrature pulse encoder, driver must be absolute reliable to not lose steps during continues time of running. Driver will be mostly used by small CNC router and engraving machines.

Project description:

Driver will drive BLDC Motors up to 500W.

Driver current output up to 10A .

BLDC Voltage up to 50V.

Command signal - step/direction (Mach3 and LinuxCNC).

Feedback - quadrature pulse encoder (encoder with commutation).

Input pulse step rate must be min 75 kHz.

PID tuning must use serial communication with an GUI where user can set parameters like:

-max encoder error

-max current

-PID (P,I,D)

Output for error 5V TTL signal.

Input for reset 5V TTL signal.

Led for error.

Detect failure (or when encoder is disconnected or any encoder failure) of encoder and turn off the outputs to motor.

We expect the following from the one who accepts the project:

PCB files ready for manufacture (2 layers PCB, original PCB project file).

Complete source code for micro-controller (clean written and well commented).

Schematics of complete PCB board.

Compiled firmware ready to load into MCU.

We expect from the contractor to resolve any bugs in software or problems with electronics in the period of 30 days after the end of the project.

Recommendations:

It would be desirable for a MCU to choose one of the STM32 cortex M3 or M4 family.

It would be desirable to send a video clip of the BLDC motor running with the driver before the project is finally completed as proof that the driver is functional.

Compétences : Design de circuits, Electronique, Logiciels Embarqués, Microcontrôleur, Mise en Page PCB

Voir plus : i need to hire an artist for projects, i need help from an engineer thermoforming experience australia, i need graphic design experience, i need experience civil engineer for my company, i need an assistant job with a little experience in upland, i need a motion graphics staff, i need a list of computer programming projects, i need easy to build cheap robot projects, i need bookkeeping experience, this is a big data entry work for all freelancer no need any experience i need 50 workers for my work so please bid my project t, i need someone who has experience with microsoft outlook installed on a macbook pro in little rock arkansas, i need experience in electrical engineering light current i have n6 electronics johannesburg, i need a developer who have good experience in woocommerce and wordpress, i need a developer who have good experience in woo-commerce and wordpress, bldc motor driver, discrete components stepper motor driver, designing bipolar stepper motor driver amps, dc motor driver board feedback, cheap stepper motor driver, building stepper motor driver, bipolar step motor driver cnc project, amp stepper motor driver, phase regenerative motor driver, motor driver code, stepper motor driver

Concernant l'employeur :
( 0 commentaires ) Belgrade, Bulgaria

N° du projet : #15185465

22 freelance ont fait une offre moyenne de 684 € pour ce travail

seshupower

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding fo Plus

1000 € EUR en 20 jours
(49 Commentaires)
6.5
Anthony989

Hello, I am Anthony from Sri Lanka and I am a FULL time freelancer. I have developed BLDC controllers and I am aware of the working principle of the motor. Relevant Skills and Experience I have all the h Plus

888 € EUR en 10 jours
(43 Commentaires)
6.1
CoherentTech123

I have experience in BLDC drives using STM32F1 and STM32L MCUs. I have used SLA7078MR and other drivers to control the BLDC for precise CNC operations. I have also implemented G-Code driver. Relevant Skills and Experi Plus

500 € EUR en 15 jours
(31 Commentaires)
5.7
riki888vw

Hi, I can design BLDC Servo Motor Driver based on - module similar to Cw885 - we can select module to cover 10A - Arduino control module for optical pulse feedback, PID control and serial input Relevant Skills and Ex Plus

656 € EUR en 20 jours
(12 Commentaires)
5.2
arslanuet123

Electronics expert and circuit designer here to help u buddy Relevant Skills and Experience Electronics Proposed Milestones €333 EUR - required work

333 € EUR en 10 jours
(15 Commentaires)
4.7
rojuwon1222

I am an Electronics and Electrical Design Engineer with the areas of expertise in Embedded System, product prototyping, PCB design and firmware development for systems. Relevant Skills and Experience I have the exp Plus

777 € EUR en 10 jours
(23 Commentaires)
5.0
750 € EUR en 10 jours
(23 Commentaires)
5.1
zeshankhan43210

Hi Sir. I am a professional Electronics and Power design Engineer having expertise in Electronic Circuit designing and in motor drivers. Contact me I am expert in PID controller designing. Relevant Skills and Experien Plus

2000 € EUR en 18 jours
(12 Commentaires)
4.6
adipdutt

Three phase BLDC motor control, ,optional isolated Drive, isolated control power supply, uc TI C2000 or ST32 F407, Isolated current sense. Quadrature encoder input. Relevant Skills and Experience Two decades in Mo Plus

660 € EUR en 25 jours
(10 Commentaires)
4.2
joshuavaldes

For the bid price, I could make you a parts list and an estimate of how long it would take to design your motor controller. Relevant Skills and Experience I have made a variety of things with brushless DC motors in th Plus

333 € EUR en 3 jours
(1 Commentaire)
4.2
bchandra1955

Professional Electronics engineer is interested Relevant Skills and Experience Electronics

722 € EUR en 10 jours
(17 Commentaires)
4.4
250 € EUR en 1 jour
(15 Commentaires)
4.4
833 € EUR en 10 jours
(3 Commentaires)
2.6
kathachilo

We have already developed one Sensor-less Automatic Sliding Door Controller with KAG-BLDC Motor & PIC16F877 Processor. In your project, we will use STM32 Cortex M4 Processor. We have ARM Cortex M4 Core Development boa Plus

700 € EUR en 30 jours
(1 Commentaire)
2.6
MB0023

Hi, I am having three years of experience in industrial products development and embedded programming. I have completed BLDC drive using STM32F407 controller and also did many other project using STM32F4 controller. Plus

250 € EUR en 7 jours
(1 Commentaire)
0.3
555 € EUR en 10 jours
(0 Commentaires)
0.0
555 € EUR en 15 jours
(0 Commentaires)
0.0
ivietcom

Hi, I am a control engineering expert and have abundant experience in practical design and development of embeded systems. If you give me this project, you will get good result. Thanks. Relevant Skills and Experience Plus

700 € EUR en 12 jours
(0 Commentaires)
0.0
ingcoenergie

A proposal has not yet been provided

722 € EUR en 90 jours
(0 Commentaires)
0.0
DONG360

A proposal has not yet been provided

555 € EUR en 30 jours
(0 Commentaires)
0.0