I require PCB layout services (and perhaps schematic design/capture) services using Protel99se.
This is the initial 'give outsourcing a try project' for me. I would like to have some extra help and have on-going
part-time work projects for an independent freelancer.
The project is to create a carrier board similar to the Gumstix Tobi but with additional functions.
The carrier board is for the Gumstix Overo FE computer module.
The initial phase is to have the carrier board include :
Power regulation (PTN7800WAH)
10/100 Ethernet (LAN9221)
10/100/1000 Gig Ethernet to USB (LAN7500)
Super Cap backup voltage for Gumstix RTC
Spartan6 16LX/25LX FPGA on the Gumstix's expansion bus
Additional Audio Codec (TLV320AIC3254) + PA
Serial Ports (RS232/RS485 via MAX3160)
LCD port to 1.4" x 1.4" OLED (Sparkfun LCD-09678)
microSD slot (Molex 500901-0801)
Dual 2mm Samtec (40 positions) for I/O and power position along the narrow edges of the board.
The PCB is expected to be 4 or 6 layers and a restricted shape and size.
Currently the overall dimension will be 1.55" by 5.00" inches with edge incursions (size and shape yet to be determined)
Multiple stacked PCB's are okay if necessary.
Finest pitch pin devices are [url removed, login to view] TQFP or [url removed, login to view] pitch of the Overo header connectors with 0402 minimum discretes.
Project is to be delivered as a Protel99se project file including schematics, pcb layout, PCB foot prints, and schematic symbols.
Project should be suitable for production via Sunstone's No-Touch PCB service.
[url removed, login to view] <-- Expansion Connectors
[url removed, login to view]
[url removed, login to view] <-- OLED
[url removed, login to view]
18 freelance font une offre moyenne de $496 pour ce travail
I am designing pcbs for last 10 years in protel99se and for one year in altium designer. I have designed several industrail and military and aerospace pcbs. I can do ur job very nicely
We are expert in schematics and PCB design and providing our services to build high tech PCBs for avionics control systems.
Hi, I am a PCB design engineer and I am working in protel 98/protel 99, i can help you with the 3d model of the PCB after ready and help you with the mecanics and with the hardware part if you need help. Thanks for the Plus
I work primarily in Protel se99. I have over 10 years experience with Protel and am an experienced hardware engineer. I have placed over 100 orders with sunstone [login to view URL] provide Protel samples of my work if you li Plus
Hi I use Accel which is a PCAD derivitive. I would do both the schematic & pcb layout as they go together . I will be able to translate the schematic into Protel99se. I also do hardware design and firmware. Plus
Dedicated at microcontroller system for 8+years, Our products include USB data logger/WLAN data recorder/CAN bus control system .etc, Good at embeded hardware and software design. Do well in 8bit/16bir/32bit MCU system Plus
I am the right person for this job i have more then ten years experiencs of bga based board layout as well as i have a commercial licensed version of altium designer and i used that tool more then four years