Terminé

Voltage controlled relay with LCD display

Hi freelancers.

I need a PCB designed and software written for a voltage controlled relay. The device will sense input voltage and display it on a standard 2 x 16 LCD display. A simple menu system will be implemented to set the on and off voltages and time between switching. The main parameters are.

The device will have 3 buttons to navigate simple menu.

The device shall keep set values so when power is lost the device will not need resetting.

The freelancer shall use Altium for the board design.

The device shall be low cost.

STM 32 MCU preferred but others will be considered.

A 5 volt relay will be used to switch an external load.

Project will need to be kept confidential.

If you need any more information please ask.

Happy bidding

Compétences : Génie Électrique, Electronique, Logiciels Embarqués, Microcontrôleur, Mise en Page PCB

en voir plus : lcd voltage relay, system x on freelancer, software freelancer cost, relay with freelancer, power electronics freelancer, freelancer power electronics, freelancer lost, freelancer display, freelancer board design, board design freelancer, 2 power standard, freelancer microcontroller design, voltage , VOlt, relay, pcb design freelancer, pcb design altium, PCB altium, microcontroller design, mcu, low cost freelancers, load board, freelancer pcb, freelancer for pcb design, electronics pcb microcontroller

Concernant l'employeur :
( 8 commentaires ) sydney, Australia

Nº du projet : #2396792

Décerné à:

rsdevelopers

Hello, we can do it. Please check PM for details on Bid

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% AUD en 7 jours
(9 Commentaires)
3.9

36 freelance font une offre moyenne de $362 pour ce travail

MikroStar

hi, i can help you with this project.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 15 jours
(78 Commentaires)
7.8
DamithaKD

Read Pm sir :)

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 10 jours
(36 Commentaires)
6.4
quang102

hello i can do it with PIC MCU, and altium designer thanks

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(35 Commentaires)
6.5
scribblerspk

I can do your project; for more details kindly see your mail box. There are 05 reviews of mine but they are not appearing in your bid and I don't know the reason but you can check them by your self. Thanks.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 20 jours
(13 Commentaires)
5.5
yhaat

Hi, I can do this job.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 5 jours
(18 Commentaires)
5.0
zelamicro

Hi. I can do it.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 5 jours
(24 Commentaires)
4.9
usamacpp

We are a very experienced team who can tackle this task. Please check PMB for more details.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 5 jours
(3 Commentaires)
3.8
EEPL

Dear Sir, I can do this project for You. Please read private message.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 14 jours
(4 Commentaires)
4.1
nevamalap

Hello, I can help you with this project. Please check your PMB. Thank you.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 5 jours
(3 Commentaires)
3.0
SanducAndrei

in 17 years of practice i have make a lot of microcontrolers and relay bords, i can make that in 2-3 days.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 3 jours
(12 Commentaires)
3.2
hoduong

Hi You I can do this

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 7 jours
(4 Commentaires)
2.5
yamukha

Can do it using Atmega32.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 28 jours
(1 Évaluation)
2.3
creonsolutions

hey, I am an electronic undergarduate who has very good knowledge in Altiu and microcontrollers related work.I can do this using microchip PIC18F452 which is a low cost microcontroller. Awaiting for a reply. thank y Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 10 jours
(2 Commentaires)
1.8
jedversion

I can do that..

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 8 jours
(1 Évaluation)
0.7
Ivanmid

Hi. I can make this project very low cost and very efficient. I can use AtMega328P-Pu for your design since it is very cheap 5$ a piece and I have great experience with atmega. The PCB will be minimal (atmega, lcd disp Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 5 jours
(0 Commentaires)
0.0
antoonio

Hello, I can make it. Check my PM. Regards

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 20 jours
(0 Commentaires)
3.6
prabaei

i have already done this

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 3 jours
(0 Commentaires)
0.0
Analoglamb

Hello, I am an electronic engineer in Beijing. My name is Peter. I have done some projects like this. And our team are good at the STM\PIC\AVR\C8051F\MSP430 microcontrollers. The price of the product is lower than Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 20 jours
(0 Commentaires)
0.0
insanarafatjamil

I have 3.5 years of experience in digital system designing using PIC Micro-Controllers.I do PCB design in ARES , and use MicroC_Pro compiler for compiling codes. I can do this for you maintaining a cheap production Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% AUD en 1 jour
(0 Commentaires)
0.0
dspengineer

We are Microchip authorized design partner in DSP ENGINEER Inc. and We have a high Quality OEM products for TOSHIBA Home appliances Over 15 yeras experience in Embedded Systems

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% AUD en 30 jours
(0 Commentaires)
0.0