Annulé

Simple Circuit and PCB Layout

This is a home project that I was working on but, because of my lack of knowledge, I wasn't able to make it.

The project involves using a picaxe microcontroller to control two 12V 1.8 amp DC pumps with simple switch sensors. Only one pump will turn on at a time.

Everything should be powered with an AC to DC adapter.

I ALREADY HAVE THE PROGRAMMING OF THE MICROCONTROLLER DONE, so this is not included in the project.

I just need the schematic and the PCB layout for this project.

I have many of the components needed so I would like to use them in this project if possible.

The files attached will give you an idea of how I failed and the components I used. Please tell me if this is even conveniently possible.

Thank You.

Compétences : Electronique, Microcontrôleur, Mise en Page PCB

Voir plus : simple circuit pcb layout, microcontroller pcb layout, simple circuit pcb, simple pcb layout, microcontroller simple circuit, simple pcb layout project, microcontroller layout, simple pcb layout microcontroller, picaxe programming, dc programming, microcontroller circuit pcb, simple microcontroller circuit, simple circuit microcontroller, sensors, pcb, pcb schematic, pcb layout, pcb circuit, layout pcb, electronics pcb microcontroller, circuit pcb, home control circuit, simple pcb circuit, circuit programming, layout schematic amp

Concernant l'employeur :
( 1 commentaire ) San Diego, United States

N° du projet : #1626721

17 freelance ont fait une offre moyenne de 36 $ pour ce travail

carelle

Hello! I'm Electronic Engineer. I'm specialized embedded designs, including Picaxe based products. I can do what you need with quality and reliability!

35 $ USD en 1 jour
(48 Commentaires)
6.6
yhaat

Hello I can do this job.

30 $ USD en 2 jours
(10 Commentaires)
4.6
rayE

Hello, im a British design engineer with 35 experience. I can see your mistake, i can rectify that and give you a schematic and PCB layout for the working system. Regards Ray

40 $ USD en 5 jours
(1 Commentaire)
4.5
vasana18

Hi, Quality design solution with on-time delivery guaranteed if offered. Please do see my PM as well. Thank you.

50 $ USD en 5 jours
(10 Commentaires)
4.5
rsdevelopers

dear sir, We can complete this project. regards

50 $ USD en 3 jours
(7 Commentaires)
3.8
dirkk999

Hi I can do the job for you...have been designing PCB lay-outs for more than 30 years..Kind regards Dirk

30 $ USD en 1 jour
(1 Commentaire)
1.6
wojio

Hi, i can do this - http://www.wojio.b4.pl/projekty.htm (polish but you can see picture). Your scheme needs to be improved. Need you only finally project files (pdf, gerber) or physically PCB for this ? rdg Wojcie Plus

30 $ USD en 1 jour
(0 Commentaires)
0.0
nanjafeno

Dear As a Telecommunication engineer, its always our job to make circuit and pcb. Its an opportunity to bids on this job. Regards

40 $ USD en 3 jours
(0 Commentaires)
0.0
hanwate123

Send PCB Design project based on any software like allegro, Menter-PAds, and by altium.

31 $ USD en 2 jours
(0 Commentaires)
0.0
copertronic

We are specialists in PCB design, we can send the PCB in 3D for your review.

30 $ USD en 2 jours
(0 Commentaires)
0.0
nishom

I can do that easily

30 $ USD en 2 jours
(0 Commentaires)
0.0
trbrenke

12+ years desiging boards. I currently work as a product design eng in the testing of IC's. I design boards for a living.

50 $ USD en 3 jours
(0 Commentaires)
0.0
Taofiq

Hi spcs, Your circuit sounds okay to me. I think there is something wrong with your program. I can offer you to do the job without program. Just using TTL ICs. Please figure out the controlling mechanism. I mean Plus

45 $ USD en 3 jours
(0 Commentaires)
0.0
rajeshgreen1111

Hi, i think, i can help. contact me if you're interested. Thanks, Rajesh Kumar.B.

40 $ USD en 7 jours
(0 Commentaires)
0.0
superGeekpac

sir im strongly interested in your very project i m a electrical engineer i hv made alot of pcb for my semester projects so i can make this pcb layout i just 1 day i hv a very solid hold in pcb making thanks

30 $ USD en 1 jour
(0 Commentaires)
0.0
cooded

Hi, Its easy. There is just one mistake in your circuit. Rest is fine. I can make it work.

30 $ USD en 2 jours
(0 Commentaires)
0.0
uzairsaeed702

Please Try my expertise as i have sound background on that

40 $ USD en 10 jours
(0 Commentaires)
0.0
RLT

Dear Sir, We are Reserach and Development company whose working area are : -Digital Motor Control -Analog Design -Electronic Design -Power Electronics -PCB design -Embedded system -Matlab -Simulation of ha Plus

30 $ USD en 1 jour
(0 Commentaires)
2.4