Annulé

Design/Manufacture USB connected,sound activated data logger

A sound activated noise recorder which would take the form of a “USB key stick” (or similar) that would

then be able to download its data into a spreadsheet

Sound activation

It should have a threshold setting mechanism (either a physical "wheel" etc or via a PC/MAC) to enable the user to set the threshold at which the device activates. It should actually record the sound itself for playback purposes if triggered. Should be able to record short bursts of sound across an 8 hour period or longer (not continuous recording - only when threshold reached)

Physical attributes

The device should be battery powered (rechargeable via USB) , robust and splash-proof and have a cover for the USB connector (Metal? screw on?)

Size and weight similar to a USB flash drive

On/off switch (optionally combined with a threshold setting wheel - like a volume control wheel that clicks off at the end of the turn)

It should have an indicator lamp (LED) that shows it is switched on and another (or colour change) to show that it has registered a sound. Battery low warning via colour change

Onboard functions

It should have a clock function that can be set when connected to a PC/MAC and that will then be capable of time stamping the data so that noise recording frequency and duration can be assessed.

When connected to a computer via USB 2.0 the data recorded should be accessible (ideally password protected) such that the it can be uploaded onto the PC and into a “spreadsheet” for analysis.

Manufacture

Need a cost on design and b uild of 500pcs initially please but would like to be able to test prototype before prod run

Computer software - optional

#1 - GUI to assist with the configuration of settings on the device

#2 - website that will accept the uploaded data to provide a report of collected data as a service to users

Compétences : Electronique, Industrie Manufacturière

Voir plus : sound activated data logger, sound logger gui, manufacture usb spreadsheet data, sound activated noise logger, usb connected design, usb noise logger, take service, service prototype, robust design, prod design, metal design, manufacturing spreadsheet, mac software website design, hour design, design usb flash drive, clock design, b design, time logger, website prototype design, stamping, stamping design, spreadsheet design, sound, Sound design, robust control

Concernant l'employeur :
( 0 commentaires ) Sydney, Australia

N° du projet : #1030815

8 freelance ont fait une offre moyenne de 2375 $ pour ce travail

quang102

please check PM. Thanks

3000 $ USD en 30 jours
(20 Commentaires)
5.4
stemtechnologies

We do the sound data logger with Atmel Atmega microcontroller. We can do the sound digitization and record into a mini sd card. We can do the GUI software application for the pc side to configure/download the sound Plus

3000 $ USD en 45 jours
(1 Commentaire)
4.4
kamranbabar

Hi, Please see the PMB. Regards,

3000 $ USD en 45 jours
(1 Commentaire)
2.2
Sollec

Please Check PMB

1500 $ USD en 100 jours
(1 Commentaire)
1.4
jayswindow

Sent you a PM!

1500 $ USD en 20 jours
(0 Commentaires)
0.0
progsel

HI, NO PROBLEM TO DO THIS. I can appoint an electronic prototype and than we can decide for the final form and production. thank you maurizio stefani

3000 $ USD en 20 jours
(0 Commentaires)
0.0
ViiG

Please check your inbox

2500 $ USD en 60 jours
(0 Commentaires)
0.0
onuron

this project is nothing. i am doing similar kinds of project now. from other person

1500 $ USD en 30 jours
(1 Commentaire)
2.4