Fermé

Wiring/Circuit Design with LED Push Buttons

I am currently making a game in which there are 15 LED push buttons that need to be wired and connected to a black light. The ONLY way that the black light will turn on is if LED push buttons 1-8 are pressed and LED push buttons 9-15 are not (no other combination of pushing buttons / not pushing buttons will turn the black light on).

Here is the catch, each LED Push button has its own ring of LED light on it, and I need it so that whenever a LED push button is pressed, the ring of light on that corresponding button will turn on, and whenever the button is not pressed, the ring of LED will not be on, regardless if the button is the correct one to turn on the Black light or not.

I have tried to wire everything in series (LEDs to the Switch contacts to the next LED to the next switch contact etc. etc.), but this doesn't work because the rings of LED lights wont turn on individually when pressed until the correct combination of 1-8 ON and 9-15 OFF are set. I need it so that no matter what, the ring of LED light will always turn on/off when pressed/not pressed, but also work for the game so that it HAS to be 1-8 ON and 9-15 OFF to turn on the blacklight.

I have also tried to wire the LED on each individual switch in parallel to the power source separate from the switch contacts, but this method leaves the ring of LED light ALWAYS on no matter if the button is pressed or not.

Here are the links to the LED push buttons that I have, they have the standard positive and negative terminals for the LED rings, and also the NO, NC, and COMMON for the push button function:

[url removed, login to view]

I'm looking for a working diagram on how to make this system work as well as any components that is needed.

Compétences : Design de circuits, Génie Électrique, Electronique

Voir plus : what is be electrical engineering, superbrightleds, led light design circuit, how to design circuit, electrical engineering com, electrical design work, design a ring, circuit design com, led clock circuit design, led meter circuit design, design power led array circuit, led strobe circuit, simple led flashing circuit, buttons header design, design circuit board india, led flashing circuit, attiny2313 led clock circuit, led meter circuit

Concernant l'employeur :
( 0 commentaires ) Algeria

N° du projet : #8525235

26 freelance ont fait une offre moyenne de 28 $ pour ce travail

loi09dt1

A proposal has not yet been provided

25 $ USD en 1 jour
(70 Commentaires)
6.1
uetian09ee506

I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also continuing my MS degree in Electrical Engineering with spe Plus

50 $ USD en 3 jours
(87 Commentaires)
5.8
Davelelievre

I have over 35 years experience as an electronic design engineer, please see my profile for more details You will need some active components to achieve this logic. I could easily draw you a circuit to achieve this Plus

35 $ USD en 1 jour
(18 Commentaires)
5.9
Anthony989

Hello Sir, I went through your project proposal and it's very interesting and I would like to work on this project. Why you should hire me ? * I have four year experience as a freelancer and Plus

25 $ USD en 1 jour
(22 Commentaires)
5.0
cscinstructor

I have read and fully understood your requirements.. Please open chat to discuss further… _____________________-----------------------------------_____________________________------------------

100 $ USD en 2 jours
(27 Commentaires)
5.1
alan911

Hi! I'm an EE student and as far as I can see, this problem can't be resolved just with the push buttons. The easiest way would be using logic gates to detect what buttons are pressed or not, but you could save a lot o Plus

20 $ USD en 3 jours
(1 Commentaire)
0.4
ZeroPower0

Bis jetzt wurde noch kein Vorschlag eingegeben

25 $ USD en 3 jours
(0 Commentaires)
0.0
thanhnienchanbo

i did this kind of Circuit for many times :D so I have so many experiences at this ! ........................................................................................................

25 $ USD en 3 jours
(0 Commentaires)
0.0
usinha60

Good knowledge of electronics will help me to solve your problem. I have done lots of projects as electronics professional.

25 $ USD en 2 jours
(0 Commentaires)
0.0
PunitKumar23

Hi I haven't found any part on the link you posted but i have a circuit schematic for you which uses few semiconductor parts (general purpose cost-effective transistors, diodes & resistors) Need information about the Plus

20 $ USD en 1 jour
(0 Commentaires)
0.0
vattikondasanjay

I'm an enthusiastic, passionate electrical engineer looking for some circuit designing projects. I stood university 2nd in electrical circuit analysis subject which i think makes the me best suitable for this project Plus

15 $ USD en 1 jour
(0 Commentaires)
0.0
bmandl

Hello, I am electronics engineer, currently working on my diploma. I am new to freelancer, so we can make a deal for discount by your choice. As low as you like, because, I need some reputation on freelancer. I have Plus

18 $ USD en 1 jour
(0 Commentaires)
0.0
aman251994

You will receive the project with the requirement you want and the system will work according to your need . Your project will be first preference for my team .

25 $ USD en 2 jours
(0 Commentaires)
0.0
DynatronTech

A proposal has not yet been provided

25 $ USD en 1 jour
(0 Commentaires)
0.0
Deepansh1992

I am research by profession, I have completed my engineering from electronics and communication and I have 2 years experience in circuit designing and simulation. I can use proteus and pcb vizard to simulate and desig Plus

25 $ USD en 1 jour
(0 Commentaires)
0.0
ssrini21

Hi, I have a working scheme ready for this drafted. I can send it across once you award this project to me. The scheme uses only few resistors, 8-bit DIP switch, one Logic Gate, and a transistor to implement the Plus

25 $ USD en 1 jour
(0 Commentaires)
0.0
jalarajasekhar

i am best in designing digital circuits and my knowlede will be help full in designing this project.

23 $ USD en 1 jour
(0 Commentaires)
0.0
HernanOlave

Im an electrical engineer of the Universidad de Santiago de Chile. I have 3 years of experience designing circuits, developing solutions with Arduino, Atmega, and PIC Microcontrollers.

25 $ USD en 3 jours
(0 Commentaires)
0.0
mos3d

Hi there My name is Ahmed Mosad from cairo - Egypt , i have more than 6 years of experience in the field of embedded system design and s.w engineer i ready to help you finishing your project in short time and hig Plus

25 $ USD en 1 jour
(0 Commentaires)
0.0
verbitskiy

Hello!Could you send me the link to the button again(your link is not working), and I'll try to help you! I think that you will need for some amount of electronic components for the implementation of your game. But i Plus

25 $ USD en 3 jours
(0 Commentaires)
0.0