Find Jobs
Hire Freelancers

Need help with DE10-Nano FPGA Quartus project

$10-40 USD / hour

Fermé
Publié il y a plus de 5 ans

$10-40 USD / hour

I am playing with the DE10-Nano board from Terasic. I am trying to changing the FPGA code DE10-Nano board to add our H/W interface to it. I have trouble to get the correct starting point for the FPGA that will be used with Linux. If you are expert with this board, please help us to provide support to us. Who am I: I am a FPGA design expert, but know nothing about DE10-Nano. I looking for help to save my time. What I expect from you: Expert in the Architect of DE10-Nano FPGA run with LINUX. What I need you to show me: Help me the get the Quartus FPGA project that I can continue to modify and add stuff to interface with the GPIO board. This project can be used to generate SOF file that can use with LINUX with DE10-Nano. If you are NOT EXPERT WITH DE10-NANO board, please DO NOT BID on my project. This is a SUPPORTING PROJECT, and it will be very short.
N° de projet : 18374709

Concernant le projet

7 propositions
Projet à distance
Actif à il y a 5 ans

Cherchez-vous à gagner de l'argent ?

Avantages de faire une offre sur Freelancer

Fixez votre budget et vos délais
Soyez payé pour votre travail
Surlignez votre proposition
Il est gratuit de s'inscrire et de faire des offres sur des travaux
7 freelances proposent en moyenne $27 USD/heure pour ce travail
Avatar de l'utilisateur
Hi there, I have read your project description and i'm confident i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks . .
$30 USD en 1500 jours
4,8 (85 commentaires)
7,5
7,5
Avatar de l'utilisateur
Dear Sir. I am very interested in your project and I would be happy to work on it. I can help you to changing the FPGA code DE10-Nano board to add your H/W interface to it. I am a Senior Electronic Engineer with experience in the design / development of embedded systems implemented with DSP, FPGA and Microcontrollers. In my 6+ years of experience in the Aerospace and IoT industries, I worked in electronic/circuit design, PCB layout, embedded C programming and digital design. In my experience in the aerospace area, I worked in high-speed designs on FPGAs using VHDL. I have the skill to solve problems, the rapid understanding of what is required, seriousness and responsibility to carry out the work in the best way. I would like to know more details about your project. I am new to the freelance platform, but I am sure that I am the professional who can do this job. You can trust that I will give my best to deliver a work that exceeds your expectations. Thanks for your consideration Best regards
$25 USD en 40 jours
5,0 (6 commentaires)
6,2
6,2
Avatar de l'utilisateur
Hi, I hope you are doing well and enjoying digital design. I believe implementing a design right form modeling until verifying it on an FPGA is always a very special experience. Throughout my 2+ years of experience in the field, I had the joy of designing and implementing a part of LTE's physical layer right from the Matlab model, through RTL coding, simulations, and back-end stages. I also built many other designs such as a MIPS processor design, Can satellite, and a UART transmitter and receiver. All my designs were verified successfully on either Xilinx's Spartan S6, S3, or Altera's Cyclone V FPGA. This project sounds really interesting. I am so excited about it and can't wait to get started in case you would like me to. I would love to hear your thoughts and requirements for the delivery as well. Have a very good day :))
$23 USD en 20 jours
5,0 (7 commentaires)
4,2
4,2
Avatar de l'utilisateur
Hi there, I have read your project description and i'm confident i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks . .
$30 USD en 1500 jours
5,0 (3 commentaires)
3,7
3,7
Avatar de l'utilisateur
I have SoCrates CycloneV SoC boad and expereince in cyclone 5 family and Quartus/Qsys tools. Similar interface just diffeent pins. I can help you in configuring the board and software.
$24 USD en 10 jours
5,0 (3 commentaires)
2,9
2,9
Avatar de l'utilisateur
Hi! recently I've already completed complex project for DE10-Nano, with both HPS and FPGA parts. It was hardware accelerator for specific calculations which can be accessed from Linux. Mentioned project utilized DMA + Interrupt data exchange between FPGA part and Linux Kernel memory. For such functionality the custom driver have been written. FPGA part were configured from U-BOOT. Also I've compiled for this project custom Linux kernel with Angstrom rootfs.
$27 USD en 20 jours
0,0 (0 commentaires)
0,0
0,0
Avatar de l'utilisateur
I can help you with that. I have about 5 years experience in this area. I will help with Quartus software, Altera FPGA. I had an experience with this board. Made some project on this board, including running Linux
$33 USD en 5 jours
0,0 (0 commentaires)
0,0
0,0

À propos du client

Drapeau de UNITED STATES
Escondido, United States
0,0
0
Méthode de paiement vérifiée
Membre depuis oct. 31, 2010

Vérification du client

Merci ! Nous vous avons envoyé un lien par e-mail afin de réclamer votre crédit gratuit.
Une erreur a eu lieu lors de l'envoi de votre e-mail. Veuillez réessayer.
Utilisateurs enregistrés Total des travaux publiés
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Chargement de l'aperçu
Permission donnée pour la géolocalisation.
Votre session de connexion a expiré et vous avez été déconnecté. Veuillez vous connecter à nouveau.