Fermé

IOT board testing of Smart Plug

We are working on a custom design Smart WiFi Plug. The hardware and firmware are ready to use. We need to test it. We require skilled Embedded specialist who can do the testing.

What we provide:

1. Smart Plug electronic board.

2. Firmware.

Scope of Work:

1. You are required to download the firmware to the board. This requires to solder some wires to the flash pins on the board.

2. After downloading the firmware, you are required to put the Plug in real test. You need to loaded with some external load and measure the current consumption using ammeter and compare it to the built-in current sensor readings.

Compétences : Arduino, Génie Électrique, Electronique, Internet of Things, Microcontrôleur

en voir plus : real time currency conversion board, real girls message board upload pictures, adult smart plug, best iot boards 2018, iot development boards 2018, different boards used in iot, iot gsm module, iot boards comparison, arduino board for iot, iot development, iot boards 2018, external load testing, real time projects manual testing, smart smart card reader real estate, free vector graphics real estate sign board, calendar board plug wordpress, smart job board help, joomla real estate board, board design real estate, board presents real dating service

Concernant l'employeur :
( 0 commentaires ) Iraq

Nº du projet : #18905634

19 freelance font une offre moyenne de $174 pour ce travail

amelectronics

Hello sir, I have experience in designing electronics circuits and can make your project. i will make your project completely on my side and will deliver a working prototype. I can also develop hardware compatible and Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(36 Commentaires)
6.6
DreamCha

Thanks for sharing your project. As I'm a Senior Embedded System engineer, I have rich experiences in many embedded systems development and programming over 8+ years. Especially, I had developed the several sim Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(13 Commentaires)
5.8
jitendrabaraiya

i have more than 5 years experience in embedded field and IOT based things . and i have made many things based on IOT . Si i can do your job within a time limit with your satisfaction.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 10 jours
(5 Commentaires)
4.6
olaideejiwole

I am an Electrical Engineer with a masters degree and I have high proficiency in Electrical Engineering, HVAC, LTE system model, Thermal system design, FPGA, Verilog / VHDL, IOT board, Matlab/ Simulink, Microcontrolle Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(6 Commentaires)
3.4
kahan1994

Hi, I am kahan. I am embedded developer and have much experienced in hardware and software side. Waiting for further discussion. Thank you.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(7 Commentaires)
3.4
rajachowdhury

hello i have 5 years of experience in embedded systems i have experience in testing and debugging embedded hardware i have delivered many end to end product i can do your project thank you raja chowdhury

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(4 Commentaires)
3.0
Clinchhubtech

I have made projects like this and have prior experience in the modules which are to be used in the projects. I will complete this project on time as said. So please provide us with this project.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(2 Commentaires)
1.9
blascoburguillos

I'm a professional engineer with vast experience in IoT architectures. My background is aerospace engineering with a focus on Systems engineering and I'm a very skilled PCB designer and Firmware/Front-end/Back-end prog Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(1 Évaluation)
0.9
kunaldkashalkar

Hello, I am Kunal Kashalkar. I have very well know embedded programe ESP8266 server please give me one chance to work with you in this project. I will expect positive response regarding this project. Relevant Skills a Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 30 jours
(0 Commentaires)
0.0
KerwinLumpkins

Hello. I have been doing electrical design work for over 20 years. Your Smart Plug project is well within my capabilities. I have done a lot of test and characterization work over my 20+ years as an engineer. I have Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
kadamyashraj

Hello, I have extensively worked with electronics. Completing projects in time is of highest priority to me. Hope you consider my proposal.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(0 Commentaires)
0.0
aniljakkani3

Expert in MATLAB, Simulink,Verilog/VHDL and JOURNAL writing. I have the 8 years of experience as a MATLAB, Simulink Programmer and Research Journal/Artcle writer. Working as a Reserach coordinator. Journal Publication Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
saasauto

Hi, i can help you to test the smart plug. i have already IoT hub. so it will be helpful to test the complete software. Regards SaaSAuto

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 30 jours
(0 Commentaires)
0.0
ehaque023

i have recently complete a wifi home automation system using micro-controller esp8266. in my demo system multiple user interface can available to control and monitor appliances.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
darshan115

I was done one project on smart plug based on WiFi using mqtt protocol.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 10 jours
(0 Commentaires)
0.0
Sanaullahdream

As a Software Engineer, I'm working on Embedded System as like Research, Planning, Design & Development of Internet of Things & AI services. I will work with you as per as requires, just inform me what your needs.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)
0.0
mranjith1992

Hi, I have been working on microcontrollers and embedded systems for almost 5+ years. I have also been working full-time in semiconductor industry which manufactures IoT chips for 2 years. We also validate all the pro Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 6 jours
(0 Commentaires)
0.0
juans45

Soldering and uploading to a flash chip it's no problem. I have a professional soldering station and I work with DIP or SMD every now and then. However, the upload process is not explained. Is a programmer required, or Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(0 Commentaires)
0.0
eremteknoloji

I can use the AT command set. I also judge all communication protocols. I realize projects related to the following written protocols. I did a remote-controlled greenhouse applications with GSM. I perform vehicle tra Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 13 jours
(0 Commentaires)
0.0