En cours

Electronics Project

This project requires design, an electronic product to a given specification. The product will incorporate elements including analogue electronics and a programmable device such as a microcontroller or FPGA.

Project Specifications:

Many factories used automate vehicles for delivering around sites of special component etc. a simple vehicle for this application is required to be design and tested. Design a vehicle which follows a white line on the floor, and should have the ability to stop safely and provides some indication in the event of an obstructer being encountered, and then continuing on it’s path when clear. When the car observes a broken white, line it should send wireless massage to screen on the side on the blackboard indicated why the car stop. The screen will record and let the operator.

The design should be innovative, functional and cost effective.

Your work must be of outstanding quality and fully meet the requirements of the specification outcomes stated. You must show independent thinking and apply this to your work showing originality and consideration of key issues. There must be evidence of wider reading on the subject.

DELIVERABLES:

PART 1.

Product Development:

From the above specification for the development of the product, you will complete this to include the follwoing deliverables:

- a circuit design needs to be made (FULL explanations should be given)

- schematics, components used, method of assembly, operation and connections should be provided.

- this should also include the programming part (full code with explanations)

- NO actual (physical implementation is required) (basically we dont need to do any lab work) (just need to deliver the above and the below)

PART 2.

Presentation:

You will need to produce presentation slides with speaker notes outlining the features of the product and how you went about developing the product. THIS WILL BE BASED ON THE PREVIOUS DELIVERABLE. YOu will basically need to convert all outcomes of part 1 into presentation slides ti include full explanations.

The presentation slides should be done in two parts

1- the design and devleopment

2- the program (code) used to control and operate the developed product

Aim to also include (if possible) a reflection of the World of Work assessment and how you used the feedback to help you in your product development.

This is everything

Compétences : Génie Électrique, Electronique, Design de circuits, FPGA Coding, FPGA

en voir plus : wsdl project help staffingemployee data, excel project help needed, cisco project help router isp, electronics projects pdf, simple electronics projects, useful electronic projects, electronics projects with pcb layout, simple, low cost electronics projects, electronics projects for beginners, final year electronics projects, latest electronics projects with circuit diagram pdf, multisim audio signal processing project help, accounting school project help, days project help, project help process scheduling java, help college student needs summer job, project help desk ticket system, student project help matlab, investment jsp project help, project design assembly language

Concernant l'employeur :
( 13 commentaires ) Sale, United Kingdom

Nº du projet : #24596252

Décerné à:

HaziqRohail

Hello brother! We are a team of Electrical, Mechanical and Mechatronics Engineers from NUST with experience in relevant fields I found your project and it matches 90 percent to one of our projects we did last summer Plus

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% GBP en 8 jours
(3 Commentaires)
2.1

16 freelance font une offre moyenne de £660 pour ce travail

amelectronics

Hello sir, I have experience in designing electronics circuits and can program all kinds of microcontrollers. You can discuss your project with me in chat and we can move on right away. Thank you.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 15 jours
(43 Commentaires)
6.6
Fpgageek

Hi I have been working on verilog/VHDL and Xilinx and Altera FPGAs and Tools by more than 7 years. Along with me I have a very good experienced team who can deal with embedded formware development and PCB design, compl Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 10 jours
(20 Commentaires)
5.4
LeeJinMi1225

Hello! I am a senior electronic engineer. Experienced in field of Embedded System Design and Develompent. I will ensure that it works very well. I will be able to do this quickly as required. I am confident I can compl Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(4 Commentaires)
3.7
tomtommy1987

Hi, Nice to meet you. I am an electronic designer for 7+ years of experience. Here are some of the experiences that I built ago - C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Viva Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 5 jours
(14 Commentaires)
3.9
SMBelectronics

Hey There, I hope you are doing good. I read about your project and I am interested in doing it, I am an Embedded System Engineer from India with 3 years of experience in designing and manufacturing of Electronics syst Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 5 jours
(5 Commentaires)
3.0
Scorpion1100

Hello Sir, This is Saad Mazumder. I have completed my Bachelor Science degree in Electrical & Electronic Engineering. I am quite familiar to the project you are talking about. I had implemented similar autonomous car b Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 5 jours
(4 Commentaires)
2.4
macroenergy

General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(1 Évaluation)
1.8
shahab67

Hi, I'm Shahab (Mechatronics Engr). I've a working prototype for your demonstration right now. Moreover, I've took part in many robotics competitions. And also I've extensive experience working with wifi or any wireles Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 10 jours
(2 Commentaires)
1.6
josephgero

Dear Client. I have just read your job description and your project is really interesting to me. I'm an expert having specialization in Electronic Engineering Design. - Embedded system based on Microcontroller (ATMEGA Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(1 Évaluation)
0.6
AITSoft

Hello,I have read the job description and I am interested in this job. I have 8 years experience in developing products using Electronics, FPGA, Circuit Design, Electrical Engineering and FPGA Coding. I have read your Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 14 jours
(0 Commentaires)
0.0
TechArchie

A car... A line following Automated Robot... That's our requirement... We are Embedded electronic team in Bangalore... Specialized in Robotics and IoT... More than 100 Localized projects in Robotics... The Functions Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(0 Commentaires)
0.0
jvalenzuelavega

Greetings! I am the professional electrical engineer, rich experience in verilog/vhdl, fpga development.I am sure that I can satisfy you.thanks.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 20 jours
(0 Commentaires)
0.0
expertsol3

Dear Prospect Hiring Manager. Thank you for giving me a chance to bid on your project. I am a serious bidder here and I have already worked on a similar project before and can deliver as u have mentioned "I can do th Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(0 Commentaires)
0.0
FSEVE

Electronics Systems Engineer with experience in complex systems development with practicing in Embedded Systems, Schematics, PCB Layout, Bill of Materials Generation, Verilog, SystemVerilog Hardware Description Languag Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 30 jours
(0 Commentaires)
1.1
Sarath129

Hi Sir,I am an electronics engineer with experience.I can do your complete project in 7 days.I can give you the code and make a presentation and everything.I am confident because I have created a line follower robot fo Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% GBP en 7 jours
(0 Commentaires)
0.0