Electrical engineer to help size service conductors. -- 2

Job Description:

I'm working on a building with an existing 200Amp commercial panel in use and 2 - 60Amp residential Apartment panels. The 200A, 60A, and 60A are in an existing 3-gang meter. Within the building, there are 2 vacant units that the owner wants to lease out. with no meter. 1 unit will be a sandwich shop with a 200Amp panel and the other will be a barbershop with a 150Amps service. Load calculation for the 97Amp for the sandwich shop and 75Amp for Barbershop I sized up each for the future, so 200A for the sandwich shop and 150 for the barbershop.

The service conductor will be in a 4" mast connecting to a power company-supplied splice box. Then on one side of the splice box will be connecting the existing 3 gang meter and on the other side, I will install a 2 gang meter. (this is happening because 5-6 gang meters are not available in my area)

my question is how should I size the conductors? Here is what I came up with I don't think it is correct.

Service mast conductors to splice box parallel 500Kcmil

3 gang 300A meter- use 350kcmil THHN

200A existing commercial

60A x 83%= 49.8A existing residential

60A x 83%= 49.8A existing residential

New 2-350A gang meter- use 500Kcmil THHN

200A Commerical

150A Commerical

Total disconnect amps= 650A. Do I need to parallel 500kcmil or do I use the load-calculated amp and size conductors to splice box? also do I use load calculation for 3 gang 350A meter or the load calculation is 175A? I assume I have to keep the existing 300A -2 gang mete at 350kcmil.

Compétences : Génie Électrique, CAD/CAM, AutoCAD, Architecture du Bâtiment

Concernant le client :
( 0 commentaires ) Grandville, United States

Nº du projet : #35432596

4 freelances font une offre moyenne de 141 $ pour ce travail


Hello, I read your project description for Electrical engineer to help size service conductors. I have very good hands in 3D modelling, Rendering And texturing as well. Please Give me reply to Prove me I have knowle Plus

%bids___i_sum_sub_32% %project_currencyDetails_sign_sub_33% USD en 1 jour
(18 Commentaires)

I have read your project details carefully and want to tell you that the solution of your problem have been found for I'm an Electrical Engineer. With my skills on CAD/CAM, AUTOCARD and electrical use and distribution Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(0 Commentaires)

I have designed many Projects in This field. I am an Electrical Engineer at The Business and Consultant Engineering Center of Al-Azhar University.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 2 jours
(0 Commentaires)