En cours

Structural Modelling using Finite Element Analysis using Midas Gen

The job is on A floor plan for a flat slab that is supported by square columns of 300mm sides. The distances between the grids are X1, X2 and Y1, Y2; where you will be allocated your values. The centre of the internal columns coincides with the intersection point of the grids. The structural engineer decided to use concrete grade C40/50, but is not sure about the appropriate thickness of the slab that is sufficient to resist the punching shear failure without the need to use shear reinforcement.

Use the finite element (FE) software, MIDAS Gen, to:

1- Create an FE model for the slab.

2- Carry out an FE analysis, considering the boundary conditions that are provided by the columns, and the permanent and variable loads as below.


Characteristic permanent loads: self weight plus 1 kN/m2 for partitions.

Characteristic variable load: 3 kN/m2

Assume the building is braced against wind loading.

Slab thickness: find the smallest thickness, rounded to the nearest 25mm, such that the vertical deflection

does not exceed the permissible limit of EC2.

Pattern loading on the slab must be considered, but not the flexural stiffness of the columns.


you are required to produce a 1000 words technical report that includes the following:

A plan of the geometrical model.

Contour lines of deflected shape, bending stresses and shear stresses.

A table showing maximum deflections against different slab thicknesses.

Explanation about the loading used.

Recommendation on the smallest slab thickness to use, and the reasoning behind it.

Show the effect of refining the mesh.

A brief comment on how safe this thickness is against punching shear.

Compétences : Génie Civil, Analyse d'éléments finis, Génie des Structures

en voir plus : finite element analysis parabolic antenna, finite element analysis projects ansys, finite element analysis connecting rod ansys, midas gen 2018, midas gen training, midas software logo, midas civil >;, midas ngen, midas gen logo, midas software training, midas gen download, finite element analysis freelance, optimization projects finite element analysis, connecting rod finite element analysis, finite element analysis freelance projects, finite element analysis human touch ansys workbench, finite element analysis jobs, finite element analysis outsourcing, finite element analysis connecting rod using ansys, finite element analysis using ansys

Concernant l'employeur :
( 69 commentaires ) Manchester, United Kingdom

Nº du projet : #19012034

Décerné à:


I have a masters degree in structural engineering. I will surely give you all the output in 2 days.

%selectedBids___i_sum_sub_7% %project_currencyDetails_sign_sub_8% USD en 2 jours
(0 Commentaires)

15 freelance font une offre moyenne de $155 pour ce travail


السلام عليكم ورحمه الله hi i can finish your project i m very clever in this field .....i did many projects like your project --( I WILL SEND SAMPLES FOR YOU SEND MESSAGE FOR ME ) .... we are CIVIL ENGINEER Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(49 Commentaires)

Hi. I am a mechanical engineer. I have many experiences in FEA using ANSYS/ABAQUS/.. We can discuss details via chat. I wait for you now. Thanks.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(5 Commentaires)

Dear Project Owner, We have analyzed your requirements provided by you and we firmly believe and confidently assure you that our company will be able to provide an appreciable solution along with ideas and innovation Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 10 jours
(30 Commentaires)

Hi Dear, I majored in mechanics and I am a master of mechanics. And I have 10 years of good experience in FEA using ABAQUS, Ansys. Thanks.

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(13 Commentaires)

Hi , There I am a certified Structural Engineer from Egypt Since 2008 . - I have more than 10 years of experience in structural Design in : 1- Steel Design . 2- Concrete Design . 3- Timber Design . 4- Pre-s Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 2 jours
(7 Commentaires)

Dear Sir I am a professional structural engineer and I have five years work experience in structural analysis and design. I have experience to work with different types of projects located in USA,UK, Australia and Can Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(1 Évaluation)

I am mechanical [login to view URL] is enough. I have had experiences: -Solidworks -Autodesk Inventor -Autocad Mechanical -Solidcam -Catia -ANSYS -Comsol

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(1 Évaluation)

Hi, sir. I'm very interesting in your project. I'm a good structure designer using ETABS, ANSYS. I understand about your project well. I can calculated it very well. I sincerely hope that this project is just my 2 Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(1 Évaluation)

hi, I can help you with an engineering task I have skills in Civil Engineering, Finite Element Analysis, Structural Engineering

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)

Hi, dear sir I am expert in Civil Engineering, FEM I have a lot of experiment for this filed. If you look at my portfolio, you will know person that I am an best good candidate in this project. If you ping, I will Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)

Hi dear, I hope and pray that you are doing great. My name is Engr. Waleed Ahmad Khan. I've read your project description and found myself very Interested in it. We can do Structural analysis and design for you. Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)

Civil Engineer Specialist in Structures, design of buildings, calculation of structures, monitoring of work, plans of details. [login to view URL]

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(0 Commentaires)

I can provide you the Technical report after FE analysis as per your specific requirements since we are proficient experienced civil-structural engineering professionals working since last 14 years in the building and Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(0 Commentaires)

Hi i would like to a offer my services, I’m a civil/structural engineer based in the Philippines with 6 years experience in structural design, i have been using Midas Gen for the past 5 years and we have a certified li Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 4 jours
(0 Commentaires)