ClearPass NAC & Portal Setup

@Microlent

Your acceptance criteria make the scope clear: the important part is not simply configuring ClearPass, but making the same NAC logic work consistently across wired 802.1X, corporate Wi-Fi, OnGuard posture enforcement, and the isolated guest workflow. I would approach this by first validating the existing ClearPass, ArubaOS-CX and wireless configuration, then build the authentication and enforcement services around the three required test scenarios. For OnGuard, I would define the healthy, unhealthy and initial access states so posture results translate cleanly into the appropriate role/VLAN. The guest workflow would remain separate from corporate 802.1X, with self-registration leading to the restricted guest role while keeping internal networks inaccessible. I would also document the final ClearPass services and infrastructure configuration so the setup can be reproduced at another site. Before estimating accurately, I’d need to confirm your ClearPass/ArubaOS versions, corporate 802.1X method and whether the guest VLAN/firewall isolation is already in place. If you share those details, I can outline the implementation sequence and realistic timeline.

@diektech

Hi — Elias here from Miami. This is a ClearPass NAC deployment where the key is making wired, corporate Wi-Fi, guest access, and OnGuard posture enforcement behave consistently rather than treating them as separate configurations. What usually matters most here is policy ordering and enforcement. I’d structure ClearPass services around 802.1X authentication, endpoint/posture state, role mapping, and downloadable enforcement profiles, with unhealthy devices moved to remediation access instead of production. For guests, I’d keep captive portal authentication isolated from corporate 802.1X, with self-registration, VLAN assignment, expiration rules, and internal-subnet restrictions. I’d also align ArubaOS-CX and ArubaOS 8/10 RADIUS, roles, CoA, accounting, and certificate configuration so the acceptance scenarios are reproducible. I have experience with enterprise networking, RADIUS/802.1X, NAC, VLAN/role-based access, certificates, and secure infrastructure deployments. A few questions to better understand the scope: Q1 – Which ClearPass version and licensing do you currently have? Q2 – Will corporate authentication use AD/Entra ID, certificates/EAP-TLS, or credentials? Q3 – How many switches, controllers/APs, and sites are included initially? I’d expect roughly 3–5 days for the initial environment, testing, and documentation once access, certificates, RADIUS secrets, and network details are available. Looking forward to hearing from you.

@kashifnadeem86

Hello, I can help implement and validate your Aruba ClearPass NAC environment across both wired and wireless infrastructure, including 802.1X authentication, role-based access, OnGuard posture assessment, and guest captive portal workflows. My background is in enterprise networking, cloud infrastructure, security, VPNs, Linux/Windows systems, and network access control technologies. I regularly work with production environments where authentication, VLAN segmentation, routing, security policies, and reliable documentation are critical. I would first review your existing ClearPass deployment, ArubaOS-CX switches, wireless architecture, VLAN design, PKI/certificates, authentication sources, and OnGuard licensing before making production changes. Estimated delivery: 10 business days, depending on the current environment and testing requirements. Regards, Kashif

@Lats7

# Job Cover Letter Hello, I’m Stefan from WebAIProTech, based in Australia, with strong experience in network security, cloud infrastructure, authentication, and enterprise systems. I can help implement the Aruba ClearPass environment across wired and wireless networks, including 802.1X authentication, dynamic roles, OnGuard posture checks, guest captive portal, VLAN isolation, RADIUS integration, and consistent ArubaOS-CX/ArubaOS enforcement. I would approach this by first reviewing the current network, VLANs, certificates and authentication requirements, then build the ClearPass policies and test each scenario independently before production rollout. I can also provide documented ClearPass service configurations, switch/controller CLI snippets, troubleshooting steps and a repeatable deployment guide for future sites. Estimated timeline: 1–2 weeks depending on access and existing infrastructure. Available to start immediately. Best Regards, Stefan

@MagCloud

Hi, I’m Mohit from Mag Cloud Solutions, and I can help implement your Aruba ClearPass NAC environment across wired and wireless infrastructure with a focus on secure, repeatable policy enforcement. I can handle: ClearPass Policy Manager configuration for 802.1X authentication/authorization Dynamic roles and VLAN assignment based on identity and posture OnGuard endpoint health/posture assessment Guest captive portal with self-registration and isolated VLAN access ArubaOS-CX switch and ArubaOS wireless/controller integration RADIUS, accounting and policy troubleshooting Testing corporate wired, corporate Wi-Fi and guest scenarios ClearPass dashboards and authentication/accounting validation I’ll document the complete configuration, including ClearPass service definitions, policy logic, switch/controller CLI or GUI steps and reusable deployment notes for additional sites. Prerequisites: ClearPass access, Aruba switch/controller access, certificates, RADIUS/shared secrets, VLAN/IP details, directory/identity source and guest-registration requirements. I’ll first review the existing network and authentication architecture, then build in a controlled test environment before production rollout. Timeline: Approximately 5–10 working days, depending on the current infrastructure and certificate/identity setup. I’m available to start immediately and can provide a clear implementation plan before making production changes. Best regards, Mohit

@sufyanasmat38

I have worked on similar Aruba ClearPass NAC deployments involving 802.1X, wired/wireless authentication, ClearPass Policy Manager, OnGuard posture checks, dynamic roles, captive portals, VLAN enforcement, and ArubaOS-CX/ArubaOS wireless infrastructure. I can configure and test the complete flow for corporate, guest, and posture-based access while keeping the policies consistent across the network. I can start immediately and provide the required ClearPass service configurations, switch/controller CLI or GUI steps, and documentation so the setup can be reproduced at other sites. I would also validate the three acceptance scenarios end-to-end and ensure authentication, posture, and accounting data are visible in ClearPass. Do you already have the ClearPass server/VM, certificates, RADIUS configuration, and Aruba switch/AP/controller access ready? With the prerequisites available, I can begin the implementation immediately.

@mubeenm5026

As a senior member of the Web Crest team with over 10 years of experience in software development, I am well-equipped to handle your ClearPass NAC and Portal setup project. Although my profile may appear unrelated, I assure you that my diverse skills and adaptability make me an ideal fit for this task. In terms of NAC, PHP constitutes a crucial part of Aruba ClearPass customization which involves developing or refining policies for wired and wireless edge ports as specified in your project description. My extensive experience with the language means I can efficiently develop scripts, providing you with accurately documented CLI or GUI steps along with required switch/controller snippets for future use. Furthermore, using my profound understanding of systems and API integrations, I am equipped to integrate ClearPass OnGuard effectively to ensure endpoint health before granting access across your production network. Rest assured, all the solutions envisioned would be built adhering to industry best practices-paying particular attention towards security and future scalability.

@mayr81

Set up Aruba ClearPass NAC & Portal to secure both wired and wireless access with policy-driven access control. Deliverables will include robust ClearPass Policy Manager configuration for 802.1X authentication/authorization, ClearPass OnGuard endpoint posture checks (AV/patch level/health) prior to production access, and a guest captive portal that self-registers then redirects devices into an isolated VLAN, while internal users continue transparent 802.1X and never see the portal. I’ll coordinate ArubaOS-CX switch settings and ArubaOS 8.x/10.x controller/AP (or AP) enforcement so role assignment, VLAN mapping, and enforcement behavior match consistently across the environment. Acceptance will be validated across: wired test laptop posture-based dynamic role; corporate Wi‑Fi 802.1X landing on the secure employee VLAN; guest phone on the “Guest” SSID redirected to the captive portal, completes registration, and browses isolated from internal subnets; and ClearPass dashboards showing posture, authentication, and accounting data. You’ll receive documented CLI/GUI steps plus exported ClearPass service definitions and required switch/controller snippets so the setup can be reproduced at other sites.

@zubairitpro

Hi, I am an experienced network engineer with 8+ years of hands-on, i already running aruba clearpass in my environment with 5000+ devices including router, switches, pdus, servers(with radius), accesspoints. I can deploy it for you as per your requirement l, lets get connected thanks

@hayteekeys

HI, KINDLY READ THROUGH MY PROPOSAL I will design and implement a complete Aruba ClearPass Network Access Control solution covering both wired and wireless access, with OnGuard posture assessment and a seamless guest captive portal. MY APPROACH ✅ Build 802.1X authentication and authorization policies in ClearPass Policy Manager ✅ Integrate ClearPass OnGuard for endpoint health checks ✅ Configure guest captive portal with isolated VLAN assignment ✅ Align ArubaOS-CX switches and ArubaOS controllers/APs for consistent enforcement DELIVERABLES - Working ClearPass policies and OnGuard configuration - Captive portal setup for guests - Documented CLI/GUI steps, exported service definitions, and switch/controller snippets - Successful demonstration of the three acceptance scenarios QUESTIONS 1. Do you already have ClearPass licenses, certificates, and RADIUS secrets ready? 2. Approximate number of switches and access points involved? I am Ready to start immediately.

@iamhamzazaki

As someone who values the security and efficiency of your network, I understand the importance of having a robust NAC system like ClearPass in maintaining the integrity of both wireless and wired sides. My skills in electronics programming, embedded systems, and application development equip me to provide an end-to-end solution that encompasses not just setting up ClearPass but also integrating it with your (ArubaOS-CX) switch and controller/AP (ArubaOS 8.x/10.x).

@mughiraaa

hi, i have reviewed the details of your project. i can configure aruba clearpass for wired and wireless nac with 802.1x, onguard posture checks, and guest captive portal access. i will configure the required clearpass policies, dynamic roles, vlan assignment, endpoint health checks, and guest isolation. i will also coordinate the arubaos cx and wireless configuration and test the employee, guest, and posture based access flows end to end. i have solid experience with network security, radius, nac, authentication, and network administration. i will provide clear configuration steps, exported service definitions, and the required switch and controller settings for future sites. can we schedule a quick meeting to discuss the project in detail. it will help me understand your needs better and give you a clear plan with timeline and budget. i will also share my portfolio during the chat. mughiraa

@revival786

As an experienced tech professional, I am intrinsically driven by challenges like the one you've posted. With a solid foundation in network security and proficiency with Cisco systems, including ClearPass NAC and Aruba devices, I feel I am the perfect fit for this project. Over the last 15+ years, I have successfully secured numerous wired and wireless networks, engraining policy enforcement, authorization, and authetication in their very core. Beyond the necessary expertise that your project calls for, my deep-rooted knowledge in sub-areas like antivirus integration and VPNs makes me well-equipped to handle even nuanced pockets of your project. Transposing technical jargon into clear-cut documentation is another one of my strong suits. So you can rest assured I'll provide detailed steps to duplicate your setup. Lastly, what sets me apart beyond my skillset is my unwavering commitment to delivering scalable and innovative solutions within stipulated timelines. With over 750 projects under my belt, I've aligned a diverse range of businesses with their unique cybersecurity needs, so I have no doubt we can make this project run smoothly together. Let's get on with it; let's turn your plans into a reality!

@TechWagger2026

With over a decade of diverse experience in Web and Mobile App development, I am confident in my ability to deliver on your requirements for ClearPass NAC & Portal Setup. From your project description, it is clear that you need a professional who can closely coordinate switch and controller/AP configurations to ensure consistent policy enforcement across your network infrastructure. Particularly, my comprehensive grasp of databases (SQL, MySQL, PostgreSQL, Oracle, MS Access, MongoDB) gives me a unique edge when working with ClearPass Policy Manager and OnGuard. Similarly, my front-end expertise with HTML, HTML5, CSS and JavaScript will ensure I can seamlessly handle the captive portal aspect of your project. My proficiency with API integrations will also be essential in configuring ClearPass dashboards to display posture, authentication and accounting data as per your acceptance criteria. With my excellent organizational skills and attention to detail you can trust me to provide precisely documented CLI or GUI steps-exported ClearPass service definitions and all required switch/controller snippets to aid easy replication of the setup in other sites. I look forward to assisting you in securing both sides of your network while providing robust NAC with ClearPass Policy Manager and leveraging OnGuard for endpoint posture assessment- all while ensuring post-project consistency and client satisfaction!

@jonasdedzo

Hi there, I think you’re trying to build a consistent NAC layer across wired and wireless networks, with ClearPass making the access decision based on identity, device posture and network role. I can configure ClearPass Policy Manager, OnGuard, 802.1X, captive portal and VLAN enforcement as one coordinated solution rather than treating each component separately. I’ll first map the existing ArubaOS-CX switches, Aruba controllers/APs, RADIUS flow and VLAN structure, then configure the authentication and authorization services for corporate wired/Wi-Fi users. OnGuard policies will evaluate endpoint health such as OS and antivirus status before assigning the appropriate role. For guests, I’ll configure the Guest SSID and captive portal flow so registration results in controlled internet access on an isolated VLAN without exposing internal networks. I’ll validate all three acceptance scenarios end-to-end, review authentication/accounting/posture visibility in ClearPass and document the final configuration. I’ll also provide reproducible CLI/GUI steps, exported service definitions and required infrastructure configuration snippets. M1: ClearPass architecture, certificates/RADIUS & 802.1X policies — $1,400 M2: OnGuard posture, guest portal, VLAN/role enforcement — $1,100 M3: End-to-end testing, hardening & documentation — $1,300 Timeline: 10–14 days Looking forward to work with you. Thanks

@longngoc2307

Hello, "CLEARPASS NAC POLICY SETUP" — you need secure network access with consistent control across wired and wireless users. I’d configure the NAC flow around 802.1X authentication, endpoint posture checks, and guest isolation so each device receives the correct access role. The key part is making switch, controller, and ClearPass policies work together without blocking valid corporate users. Do you already have the Aruba ClearPass server deployed with certificates and RADIUS settings, or does the initial configuration need to be completed first? Looking forward to working with you. — Truong

@RomanSattar

Hello, You’re looking to make ClearPass the central decision point for both wired and wireless access, where identity, authentication, and endpoint posture consistently determine the access a device receives. The combination of 802.1X, OnGuard, guest isolation, and Aruba infrastructure is exactly the kind of structured security implementation I can assist with. I can work through the ClearPass Policy Manager configuration, RADIUS/802.1X policies, dynamic roles/VLAN assignment, OnGuard posture checks, and guest captive-portal workflow, while ensuring the ArubaOS-CX and wireless configuration enforce the same policies end-to-end. I’d approach this by first validating the existing ClearPass and Aruba environment, then implementing the policies, testing the three required scenarios, and documenting the final configuration so it can be reproduced at other sites. Before starting, I’d confirm the ClearPass version, ArubaOS-CX/controller versions, PKI/EAP-TLS setup, and whether OnGuard will be agent-based or agentless. I can provide the requested configuration documentation, CLI/GUI steps, and practical test evidence, with a clear timeline once I see the current environment.

@demivision

As an experienced software developer with over 20 years in the industry, I am confident in my abilities to successfully execute your ClearPass NAC and Portal Setup project. Throughout my career, I have been involved in many intricate network security projects, which has given me the skill set necessary to proficiently handle the task of establishing robust Network Access Control with ClearPass Policy Manager in your wired switches and wireless access points. One of my strongest areas of expertise is in developing secure, scalable, and high-performing systems - a critical attribute for creating ClearPass policies for 802.1X-based authentication and authorization across various network elements. Additionally, my understanding of switch (ArubaOS-CX) and controller/AP (ArubaOS 8.x/10.x) configurations will ensure consistent policy enforcement throughout your infrastructure. When we collaborate, you can depend on detailed documentation of CLI or GUI steps, exported ClearPass service definitions, and any required switch/controller snippets – all provided to ensure ease of reproduction at other sites. Let's get to work creating a future-ready system that will provide you with not just immediate value but lasting impact as well.

@abela399

Hi, I can help with the Aruba ClearPass deployment and NAC policy configuration, including wired/wireless authentication flows, posture checking, and guest access control. My background is in designing and integrating secure systems, network-connected applications, authentication workflows, and infrastructure automation. For this implementation, I can assist with ClearPass Policy Manager configuration, 802.1X authentication, RADIUS policies, role assignment, OnGuard posture validation, captive portal setup, VLAN enforcement, and coordination with Aruba switches and wireless infrastructure. I would approach this by first reviewing the current network topology, authentication requirements, certificates, and device configurations, then build and test each access scenario separately: employee wired/wireless authentication, posture-based access, and isolated guest onboarding. I can provide clear documentation, configuration exports, and reproducible steps for future site deployments. Could you share your current Aruba ClearPass version, switch models, wireless controller/AP versions, and whether Active Directory integration is already configured? Abel