
Closed
Posted
Paid on delivery
I’m working on a new piece of industrial equipment and need a tightly-packed PCB dedicated to reliable power management. Space inside the enclosure is scarce, so the board must stay as compact as possible without sacrificing robustness or serviceability on the factory floor. Your job is to take my preliminary block diagram and turn it into a production-ready design: schematic capture, multilayer layout, and the full manufacturing package. I’m flexible on tools—Altium, KiCad, or Eagle are all fine—as long as the output meets standard IPC guidelines and can go straight to my fabricator. Deliverables I need from you • Editable schematic and PCB layout files • Clean Gerber/NC drill set plus IPC-356 netlist • BOM with manufacturer part numbers and current availability • Assembly drawing and pick-and-place file I’ll provide the electrical specs, enclosure outlines, and connector pinouts as soon as we start. Let me know your preferred CAD platform, any questions about power stages or thermal considerations, and your expected turnaround time for first-pass files.
Project ID: 40768061
12 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
12 freelancers are bidding on average ₹5,892 INR for this job

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
₹15,000 INR in 7 days
7.5
7.5

Hello, I’m an electronics hardware engineer with 4 years of experience in power management and multilayer PCB design. I recommend KiCad 9 for editable schematics, compact PCB layout, and a complete manufacturing package, including Gerbers, IPC-356, BOM with available components, assembly drawings, and pick-and-place files. I’ll focus on thermal management, EMI, protection, and manufacturability. Estimated turnaround: 5–10 business days for the first-pass design, depending on complexity. Could you share the input voltage, output current requirements, and enclosure dimensions? Best regards
₹1,050 INR in 7 days
5.6
5.6

With over a decade of experience in circuit design, electrical engineering, and PCB layout, I'm confident that I am the best candidate for your automotive-grade GPS tracker PCB design project. My keen attention to detail and deep understanding of power management will ensure that your board remains compact without compromising on robustness or serviceability – a critical requirement given the sparse space inside your equipment. To me, manufacturing doesn't mean mere prototyping; it means delivering reliable production infrastructure, and the stack I pair with my designs is a testament to this approach. Having worked extensively across Altium, KiCad, and Eagle – tools that you're flexible with – I can assure you my deliverables will adhere to the standard IPC guidelines and be ready for manufacturing straight away. In addition to that, my familiarity with multiple CAD platforms will help us in speeding up the process as we can hop platforms based on our needs rather than being stuck with a single toolset.
₹1,050 INR in 7 days
5.2
5.2

Hello, I am Santosh Chaulagain, a professional Electrical Engineer and PCB Designer with over 7 years of experience in schematic design, PCB layout, and embedded systems, including ESP32, IoT devices, analog and digital circuits. I have successfully completed multiple projects for clients worldwide, delivering reliable and manufacturable designs. I have carefully reviewed your project requirements and I am confident that I can provide a high-quality solution tailored to your needs. My expertise includes PCB design using industry standards, component selection, BOM preparation, Gerber generation, and design optimization for cost and performance. I always ensure that my designs are fabrication-ready and tested for reliability. I focus on clear communication, timely delivery, and customer satisfaction. I am happy to discuss your project in detail and provide revisions until the final result meets your expectations. Looking forward to working with you. Best regards, Santosh C. Electrical Engineer | PCB Designer | ESP32 & IoT Specialist
₹5,000 INR in 7 days
3.8
3.8

Hi, I can turn your block diagram into a compact, production-ready board: schematic, multilayer layout to IPC guidelines, Gerber/NC drill with IPC-356 netlist, BOM with manufacturer part numbers and current stock, and an assembly drawing. I'll work in KiCad, so you get editable files that need no paid licence. I'm the founder of ZIRO EDA (we built ZIRO Designer, KiCad in the browser), with a 5.0 rating and 100% completion here. Delivery in 5 days. Could you share the block diagram and the enclosure size limits? Akshay
₹1,500 INR in 5 days
3.4
3.4

As an embedded systems engineer with extensive experience in PCB design, I believe I am the perfect fit for your project. I have a proven track record of comprehensive electronic development from concept to functioning product, which you mentioned as a key requirement. My skills working with Altium, ESP32, nRF52, and STM32 lend themselves perfectly to this project as well. I am able to absorb and action your electrical specifications swiftly in order to carry out professional schematic capture and multi-layer layout with minimal errors or oversight. My familiarity with IPC guidelines guarantees that the manufacturing package you require will be delivered without any concerns. Additionally, my previous work with JLCPCB and other manufacturers in preparing production files has consistently produced excellent outcomes. Throughout my career, I have integrated design thinking principles into every stage of development with a view towards user-friendliness which could be crucial for your factory floor use case. In understanding the importance of compactness and power management, I can incorporate efficient designs without compromising on robustness or serviceability. A few examples of where this skillset has been put to use include PoE power, camera interfaces and compact wearable designs among others.
₹15,000 INR in 7 days
2.8
2.8

As RF & Electronics Engineers specialized in high-frequency systems, microwave engineering, and advanced electronic design, we at Nada can provide the skillset and expertise necessary for your project focusing on a compact automotive grade GPS tracker PCB design. Our experience working with complex RF hardware and embedded systems will be invaluable in creating a tightly-packed PCB while ensuring no compromise on serviceability and robustness. We are proficient in multiple CAD platforms - Altium, KiCad, and Eagle - so you can rest assured that the output of our work will meet not just standard IPC guidelines, but will also be tailored to seamlessly go straight to your fabricator without any issues. Right from the gerber/NC drill set to an assembly drawing and pick-and-place file, we'll provide everything needed for production-ready design. With a strong focus on research and practical implementation, we don't just bring theoretical knowledge to the table, but aim to transform complex challenges into efficient real-world solutions. To further demonstrate our commitment to excellence, we actively contribute to academic research and postgraduate studies in RF & Microwave circuit design. Our background perfectly aligns with your requirements and we believe hiring us would mean choosing a reliable partner truly invested in delivering optimized and robust solutions.
₹5,000 INR in 7 days
2.5
2.5

Hi, Tightly packing an industrial power management board into a cramped enclosure comes down to thermal dissipation paths and handling 24V factory rail transients (reverse polarity, ISO 7637 / IEC 61000-4-5 surges) without radiating switching noise into adjacent circuits. I can execute the design natively in Altium Designer or KiCad following IPC-2221 standards. Before locking down the layer stackup and component placement, three points to review: Power Budget & Rail Steps: What are your input voltage ranges (e.g., 9–36V nominal industrial) and output rails (e.g., 24V, 12V, 5V, 3.3V)? Knowing the continuous and peak load currents per rail will determine whether synchronous buck regulators or discrete power stages are required. Thermal Dissipation: Since vertical/horizontal space is restricted, can the board use thermal vias to sink heat into the enclosure chassis via a gap pad, or are we relying strictly on internal 2 oz copper ground planes for convective cooling? Protection & Isolation: Do any of the rails require galvanic isolation, or is standard input transient protection (TVS, series Schottky/ideal diode, polyfuse/eFuse) sufficient? Deliverables: Native Altium/KiCad schematic and PCB files (DRC clean), RS-274X Gerbers, NC drill, IPC-D-356 netlist, assembly drawings, CPL file, and an active BOM sourced from Mouser/DigiKey.
₹11,000 INR in 4 days
0.9
0.9

With over a decade of experience under my belt, I am excited to bring my software development skills into board design - specifically PCB. I understand that your project requires a compact GPS tracker design that adheres to the IPC guidelines and is suitable for industrial usage. My vast experience in using popular CAD platforms like Altium, KiCad, and Eagle, ensures that I can meet your design requirements without any hindrances. One of my core strengths is converting conceptual designs into production-ready schematics and PCB layouts. Collaborating with you, I will create a highly efficient GPS tracker board that fulfills all your specifications. I have a strong understanding and knowledge of power management stages and thermal considerations which will be instrumental in designing a robust and reliable board. Communication and collaboration are paramount in such projects regarding power stages or thermal considerations where minute details are crucial. Let's start this collaboration; I am eager to receive your electrical specifications, enclosure outlines, connector pinouts so that we can work together to create the GPS tracker as per your vision and deliver the first-pass files within the turnaround time you require.
₹1,050 INR in 7 days
0.0
0.0

My name is Neha and I specialize in precisely bringing complex circuit concepts to life through transforming them into physical hardware, ensuring optimal signal integrity, clean power distribution, and tight mechanical constraint management. Apart from possessing expert skills in schematic capture and board layout, my hands-on experience also includes the development of custom lithium-ion battery packs, which resonates well with your project's needs for reliable power management. Moreover, I understand the importance of every millimeter when developing a compact PCB like yours. My proficiency with various CAD platforms including Altium, KiCad, and Eagle ensures flexibility while adhering to standard IPC guidelines which guarantees smoother coordination with fabricators. In a nutshell, my deep understanding of end-to-end PCB design and battery hardware R&D combined with my dedication to precision, reliability, and optimization make me an ideal fit for your project's goal of a compact yet robust GPS tracker PCB. I’m eagerly looking forward to collaborating with you in this project!
₹1,050 INR in 7 days
0.0
0.0

Hello, I can help develop your compact power-management PCB in KiCad. My background is 30 years of embedded hardware engineering, including compact industrial controller boards, power distribution and multilayer PCB design. My portfolio includes an ESP32-S3 industrial controller and battery-powered wireless controller boards. Your title mentions an automotive GPS tracker, while the description focuses on industrial power management. Please confirm which scope is intended and share the block diagram before award. My ₹1,500 estimate and 10-day schedule are for the compact board described, subject to confirming the number of power stages, voltage/current ratings and enclosure constraints. I would target first-pass schematic/placement in 5 days after requirements are frozen. I will review power architecture, protection, current paths and heat dissipation, then capture the schematic and route the multilayer board with serviceable connector placement. Deliverables will include editable schematic/PCB files, Gerber/NC drills, IPC-356 netlist, manufacturer-part BOM, assembly drawing and pick-and-place file. Please provide input/transient range, output rails and loads, layer/size limits, connector pinouts and thermal/environmental targets. Automotive qualification or certification is not implied by a prototype design; fabrication and measured validation are separate.
₹1,500 INR in 10 days
0.0
0.0

Hello, This is exactly our field. MDS (Magen Daniel Systems, Bengaluru) designs 4G GPS trackers and vehicle electronics in-house - automotive 12/24 V input stages, load-dump/reverse-polarity protection, LTE/GNSS modules and compact multilayer layouts. What you get: - Schematic from your block diagram, with automotive input protection (TVS / ideal-diode) and a power budget - Compact 4-layer layout (6-layer if density needs it), proper GND/RF/antenna keep-outs for GNSS/LTE - Gerber + NC drill + IPC-356, BOM with MPNs and live availability, assembly drawing, pick-and-place - Tool: KiCad or Altium - your choice; IPC-compliant and DFM-checked for your fabricator Questions to start: Which LTE/GNSS module (Cat-1 / Cat-M / 2G)? Input range 12 V only or 12/24 V? Backup battery? Enclosure outline (DXF/STEP)? Turnaround: first-pass schematic for review in ~4 days, layout + manufacturing package in ~10 days total. Best regards, Haim Daniel - Magen Daniel Systems LLP
₹12,500 INR in 10 days
0.0
0.0

Lucknow, India
Member since Oct 14, 2026
$10-30 USD
$30-250 USD
$70-85 USD / hour
$30-250 USD
₹600-1500 INR
$750-1500 SGD
£20-250 GBP
€30-250 EUR
$30-250 USD
€750-1500 EUR
₹12500-37500 INR
$250-750 SGD
₹12500-37500 INR
$1500-3000 USD
$50-100 USD
$10-30 CAD
£10-20 GBP
₹1500-12500 INR
₹1500-12500 INR
$30-250 USD