
Completed
Posted
Paid on delivery
I already hold detailed 2-D drawings and a mesh in .STL format, but what I still need is a clean, fully-parametric solid model that can go straight to an ABS injection-molding shop for a prototype run. Every critical dimension called out in my drawings must be carried over exactly, so the rebuilt geometry has to be more than a simple surface conversion—draft angles, consistent wall thickness and proper radii for ABS need to be built in from the start. You are free to work in SolidWorks, Fusion 360, Inventor or any equivalent package, as long as the final deliverables include: • Native CAD file with a clear feature tree • STEP file suitable for the toolmaker • A dimensioned PDF drawing that mirrors my stated tolerances I will provide the existing .STL and annotated drawings as soon as we begin; feel free to suggest minor DFM tweaks if you spot anything that would shorten cycle time or reduce sink marks. Once the files open cleanly on my side and the key dimensions check out, the job is done.
Project ID: 40755535
32 proposals
Remote project
Active 6 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs

Are you looking for an experienced mechanical CAD designer to rebuild your existing STL and detailed 2D drawings into a clean, fully parametric solid model ready for ABS injection-molding prototyping? I can accurately reproduce the critical dimensions from your drawings while incorporating proper draft angles, uniform wall thickness, radii, and practical DFM considerations from the beginning. I have experience with SolidWorks, Fusion 360, Inventor, reverse engineering from STL/mesh data, parametric solid modeling, injection-molded plastic parts, and manufacturing drawings. Deliverables Fully parametric native CAD model Clear and organized feature tree Exact critical dimensions from your drawings Proper ABS injection-molding draft angles Consistent wall thickness where applicable Suitable internal/external radii and fillets DFM review for sink marks, manufacturability, and cycle-time improvements STEP file suitable for the toolmaker Why choose me I focus on rebuilding the geometry as a true editable parametric solid rather than performing a basic STL conversion, while keeping the model practical for injection molding and faithful to your specified drawings. Best regards
$60 USD in 3 days
2.4
2.4
32 freelancers are bidding on average $86 USD for this job

Hello there!! I can rebuild your existing STL and 2D drawings into a clean, fully parametric solid model suitable for ABS injection molding. I will carefully carry over the critical dimensions and tolerances while incorporating proper draft angles, consistent wall thickness, radii, and practical DFM considerations. I can also suggest minor improvements to help reduce sink marks and improve manufacturability. Please have a look at my portfolio: https://www.freelancer.com/u/babanpreet852.html I have 8+ years of experience in 2D drawings and 3D modeling, Rendering, texturing. 3D softwares are following: 3Ds Max, Maya, Zbrush, Solidworks, AutoCAD, SketchUp. Thank you for your time and consideration.
$140 USD in 6 days
8.5
8.5

Hello!! With a solid decade of experience in 3D CAD and AutoCAD, I can say with confidence that your project is exactly within my wheelhouse. My proficiency in Fusion 360 and SolidWorks ensures that you will receive a native CAD file with a clear feature tree, a STEP file that meets the toolmaker's requirements, and a dimensioned PDF drawing which mirrors your specified tolerances - all of this aligned with the key dimensions of your existing drawings. Moreover, I believe attention to detail is paramount in this type of work and I am scrupulous when it comes to maintaining your critical dimensions while implementing any necessary DFM tweaks- from draft angles to wall thickness and radii for ABS. My aim is to provide you with a fully-parametric solid model that not only respects your initial design but also enhances it wherever possible. Lastly, my goal is simple - delivering exceptional results without compromising deadlines. Since I've worked extensively on similar projects in the past, I have the foresight to ensure your files open cleanly on your end and pass all necessary quality checks. Allow me to bring your injection mold project to life and you can be assured of its outstanding quality!
$70 USD in 1 day
8.5
8.5

Hello, This is not an AI bid; this is a self response. Your detailed drawings and STL provide a strong foundation for rebuilding a clean, fully parametric ABS injection-mold CAD model, and I’m confident I can structure it for prototype tooling. I’ll carefully recreate the critical dimensions, draft angles, wall thickness, radii, and tolerances, while maintaining a clear feature tree. The deliverables will include the native CAD file, toolmaker-ready STEP file, and dimensioned PDF drawing. I’ll also review the design for practical DFM improvements that may reduce cycle time or sink marks without compromising your requirements. I can begin by checking the annotated drawings against the mesh and target a clean first model for review promptly. What are the target material grade, shrinkage assumptions, and preferred CAD platform for the prototype mold? Best regards, Sahil
$30 USD in 1 day
6.5
6.5

Hello, I have extensive experience rebuilding injection-molded plastic components from STL meshes and 2D drawings into clean, fully parametric CAD models. I’ve worked with ABS housings and mechanical parts involving controlled wall thickness, draft angles, radii, ribs, bosses, mounting features, and tolerance-critical interfaces. I’ll reconstruct the geometry from your drawings and STL reference while preserving all critical dimensions and tolerances. The model will be structured with a clear feature tree, checked for draft and molding conditions, and supplied with the native CAD file, toolmaker-ready STEP, and dimensioned PDF drawing. Regards
$100 USD in 2 days
6.2
6.2

Hello Sir, I have 10+ years of experience in SolidWorks, CAD modeling, and mechanical/product design. I can rebuild your STL and 2D drawings into a clean, fully parametric SolidWorks model with accurate dimensions, draft angles, uniform wall thickness, proper ABS molding radii, and a clear feature tree. I will provide the native CAD file, toolmaker-ready STEP, and dimensioned PDF drawing with your specified tolerances. I can also review the design for minor DFM improvements to reduce sink marks and improve injection molding. I can start immediately and deliver accurate, manufacturing-ready work. Thank you.
$36 USD in 1 day
5.6
5.6

Hello, I’m an experienced SolidWorks CAD designer specializing in injection-molded plastic parts and scan/mesh-to-CAD reconstruction. I can rebuild your STL and 2D drawings into a clean, fully parametric model while maintaining all critical dimensions and tolerances. I’ll incorporate proper ABS wall thickness, draft angles, fillets/radii, ribs, bosses, and other injection-molding requirements directly into the feature tree. I’ll provide the native CAD file, toolmaker-ready STEP file, and a dimensioned PDF drawing matching your specified tolerances. I can also review the design for DFM improvements such as reducing sink marks, improving moldability, and shortening cycle time without changing critical geometry. I’m available to start immediately and can deliver a clean, manufacturing-ready model with organized features and accurate documentation.
$50 USD in 1 day
5.4
5.4

OVER 200 PROJECTS DELIVERED ON THIS PLATFORM WITH A 4.5+ STAR RATING IS NO COINCIDENCE. I'm a mechanical engineer with 10 years of active experience in parametric solid modeling and injection-mold-ready design — and I understand exactly what you need here. This is not a surface conversion job. I'll rebuild your part as a clean, fully-parametric solid model from your 2D drawings, with every critical dimension carried over exactly. Here's my step-by-step plan: Review your .STL and annotated drawings; cross-check all critical dims Rebuild as a feature-based parametric solid (sketch-driven, editable tree) Apply ABS-specific draft angles, uniform wall thickness, and proper fillets/radii Run a DFM check — flag any sink-mark risks, sharp corners, or thick sections and suggest minor tweaks to cut cycle time Deliver native CAD with a clean feature tree + STEP for the toolmaker + dimensioned PDF matching your tolerances Typical first solid model: 3–4 days. Iterations on feedback: within 24 hours. I'll verify all key dimensions against your drawings before handoff so files open cleanly on your side. One question so I can plan the mold side properly: what's your target nominal wall thickness and draft angle for the ABS — or would you like me to propose values based on the overall part size and geometry? Ready to start as soon as you send the files.
$100 USD in 15 days
5.4
5.4

As an experienced 3D Artist and Animator, specializing in CAD's, this project is right down my alley. I've honed my skills in converting 2D concepts into fully-parametric solid models especially adept at building critical dimensions into the reconstruction. Utilizing software such as SolidWorks, Fusion 360, Inventor, or any equivalent package that you prefer; I'd be able to create a native CAD file with a clear feature tree, a STEP file suitable for the toolmaker, and a dimensioned PDF drawing to mirror your stated tolerances One of the key features of my services is meticulous attention to detail, which aligns perfectly with your need to ensure every critical dimension of your drawings are pragmatically accounted for. Working with impeccable precision and executing minute DFM tweaks overtime has helped me foster efficiency in minimizing cycle times and eliminating sink marks. In conclusion, I am confident that my exceptional skills in CAD modeling matched with my propensity for technical excellence make me an ideal fit for this project. You can undoubtedly rely on me to deliver high-quality results within your specified deadline while maintaining an open line of communication throughout the entire process. Let's bring your vision to life together!
$87 USD in 1 day
5.5
5.5

Hi there ! With over a 7 years of experience in 3D CAD modeling and explicit proficiency in SolidWorks, Fusion360, Inventor and many more softwares, I am highly equipped to deliver the accurate, fully-parametric ABS injection mold CAD model as desired for your prototype. Your project aligns perfectly with my area of specialization; mechanical design and product design - both from concept to manufacture stage. I understand how crucial precision and adherence is in the field of manufacturing, as such my designs are known for their accuracy and compatibility. My understanding of Design for Manufacture (DFM) will also come in handy during this project, allowing me to suggest DFM tweaks that can optimize production process and reduce possible defects often associated with ABS injection molding like sink marks. In addition to delivering your native CAD file, STEP file suitable for the toolmaker and dimensioned PDF drawing mirroring your specified tolerances, I can assure you of timely delivery even while maintaining our expected high standard of quality. With such firm commitment and breadth of skill set, I am confident that choosing me would ensure the completion of your project surpasses all expectations Thanks & regards Gaurav Sharma....
$30 USD in 1 day
4.3
4.3

Hi, I have carefully reviewed your project description and I am confident in my ability to deliver a clean, fully-parametric solid model for your ABS injection mold. I will ensure that all critical dimensions from your drawings are accurately transferred, incorporating draft angles, consistent wall thickness, and proper radii essential for ABS injection molding. With over 3 years of experience in 3D Modelling and CAD using SolidWorks, I am well-equipped to meet your requirements. The final deliverables will include a native CAD file with a clear feature tree, a STEP file suitable for the toolmaker, and a dimensioned PDF drawing reflecting your specified tolerances. I am eager to collaborate on this project and make any necessary DFM tweaks to optimize the design for production efficiency. Let's discuss further details and refine the project together. Looking forward to working with you.
$50 USD in 1 day
3.7
3.7

The specific technical risk is rebuilding your STL mesh into a fully-parametric solid model that incorporates draft angles, consistent wall thickness, and proper radii for ABS injection molding. I will achieve this by using your 2-D drawings as the primary guide in SolidWorks, creating a clean feature tree that precisely matches every critical dimension and builds in the necessary molding considerations from the ground up. The deliverable will be a native SolidWorks file, a STEP file for the toolmaker, and a dimensioned PDF drawing reflecting your stated tolerances. When you mention a prototype run, what is the anticipated quantity for this initial batch? I need your 2-D drawings and the .STL file to begin. I have a 5.0 rating across 10 reviews on here, and Preferred Freelancer status.
$160 USD in 21 days
3.5
3.5

Dear Client, I understand you need a clean, fully parametric solid model rebuilt from your STL and detailed 2D drawings, with every critical dimension and tolerance carried over accurately. I can develop the model with a proper feature tree while incorporating ABS-appropriate draft angles, consistent wall thickness, and suitable radii for injection molding. I can deliver the native CAD file, toolmaker-ready STEP, and dimensioned PDF drawing matching your specified tolerances. I can also review the geometry for practical DFM improvements such as reducing sink marks and improving molding/cycle-time efficiency. Could you share the STL and annotated drawings so I can review the complexity and confirm the best modeling approach?
$240 USD in 2 days
2.6
2.6

Yes, sir I can handle your project as I have well years of experience in this work. Give a try to my service and you'll get the best outcome from my side. Best regards Yogesh J
$140 USD in 6 days
0.0
0.0

PRECISION IS KEY: Your prototype deserves accuracy. I can transform your 2-D drawings and .STL mesh into a fully-parametric solid model tailored for ABS injection molding. By using SolidWorks, I’ll ensure that every critical dimension is meticulously carried over, incorporating draft angles and consistent wall thickness from the outset. I'll deliver a native CAD file with a clear feature tree, a STEP file for your toolmaker, and a dimensioned PDF that aligns with your tolerances. If I identify any minor DFM tweaks that could enhance cycle time or minimize sink marks, I will suggest those to optimize the design. What specific tolerances or features should I be particularly mindful of during modeling? Let’s create a prototype that meets your exacting standards. Kind regards, Ethan KCK
$50 USD in 8 days
0.0
0.0

Hi,Federico. I can help rebuild your STL and 2D drawings into a clean, fully parametric solid model ready for ABS injection molding. I’ll work in SolidWorks 2025 and make sure the critical dimensions and tolerances from your drawings are carried through accurately. I am ready to start immediately.
$80 USD in 1 day
0.0
0.0

El Pinar, Uruguay
Payment method verified
Member since Oct 2, 2026
$30-250 USD
$8-15 AUD / hour
₹5000-9999 INR
$40 AUD
$250-750 USD
$8-15 AUD / hour
$30-250 USD
$25-50 USD / hour
$15-25 USD / hour
₹600-1500 INR
$30-250 NZD
$250-750 USD
$250-750 USD
$15-25 USD / hour
$250-750 USD
$8-15 USD / hour
$250-750 USD
$14-30 NZD
₹1500-12500 INR
₹100-400 INR / hour
$30-44 USD