Fermé

CAD DEVELOPER

Looking to design a cylindrical like model approximately 3 inches wide by 3 inches tall with a water tight sealed side entry that slides open into a storage area capable of holding 8 -12 ounces of granular matter. Additionally, said model will contain a permanently affixed water tube with threads to attach to a 1/2 inch water spout. It must also have a shallow seat below the threads for a rubber seal. The tube will allow for the free flow of water from the water spout to an opening on the floor of the storage area, The floor shall be permanently affixed upon an X beam and contain 2 holes opposite each other allowing for water to flow to and from the left and right sealed sections of the X. The X beam will function to divide the flow of water into sealed quadrants and allow water entering the top, bottom and left quadrant to drain. Water falling into the right quadrant will not drain but rather be forced back up into the storage chamber through the small hole where it will mix with the granular like substance before exiting the hole opposite where it will fall into the left quadrant and out the drain.

A dial having an opening that broadens shall install underneath the hole of the right side quadrant. The flow of water from the sealed quadrant into the storage chamber will be determined by its setting. An OFF setting will block the flow of water forcing its passage back into the stream of water and out. If front facing rotate the dial clockwise all the way for OFF then counterclockwise to set mixture low to high as dial opening broadens.

The drain pipe must have a water spout like extension including 1/2 inch threads to affix an external shower head.

Compétences : CAD/CAM, AutoCAD, Solidworks, Design de produits, Design industriel

en voir plus : cad developer salary, what is cad, cad development, looking marine cad designer complete small sailboat design, hire a developer for small job, java developer looking for a job, leamington spa app developer looking for a job, looking for someone who is a web developer with php and zend in yorkshire, we are looking for someone to design a double sided a5 flyer with an infographic displaying our services and \mission statement\, we are looking for someone to design a double sided a5 flyer with an infographic displaying our services and mission statement u, web developer looking for a job nuneaton, where can i find a small real estate developer looking to buy land in arizona, app developer looking for a job, graduate web developer looking for a projects, im software developer looking for a freelance project, i want to hire a software developer for small job, ruby developer looking for a job back end lviv or, senior developer looking for a job, software developer looking for a job cape town, software developer looking looking for a job

Concernant l'employeur :
( 14 commentaires ) Wake Forest, United States

Nº du projet : #20731009

46 freelance font une offre moyenne de $397 pour ce travail

WProductDesigner

Hi there! I am a SolidWorks expert, product designer, and mechanical engineer. I checked your job carefully and I have a great interest in your project. I have many experiences in your project. I'm sure of completing y Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(255 Commentaires)
7.7
gonzalezbosque

Hello, My name is Federico González Bosque and I am an Industrial Designer. I have 14 years of experience in design new products. Also, I offer rapid prototype services to test our designs. The budget will be sent Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(59 Commentaires)
7.8
kingjoon

Hi, We are a team with more than 17 years experiences in 3D design, product modeling and realistic visualization fields. We can model the mentioned parts based on your requirements and references. Please check o Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(33 Commentaires)
7.1
moshchan

Hello! I am a Mechanical Design Engineer. I would like to propose you the following services: - 3D Modeling (parametric CAD / NURBS, polygonal); - 3D Rendering; - CAD/CAM Design (2D & 3D); - Industrial Design; - Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(103 Commentaires)
7.0
kalp29

Hello sir I am professional 3d cad designer with first class in Mechanical Engineering .i am capable in 2d drawing , 3d modelling , 3d rendering etc from past decade .I have seen the images and details and i feel confi Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(194 Commentaires)
7.1
ashrafshekh

Hello, ⭐Dear Employer⭐ Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulat Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(52 Commentaires)
6.8
abushahama

Hi there, My name is Abu Shahama. I’ve read your brief and can see that you’d like to design a cylindrical product with the water inlet and outlet feature. I can provide 3D CAD model, manufacturing drawing, 3D renders. Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(112 Commentaires)
6.4
alok9007

Please share all details including sketch or images for references. Hi, this is Alok. I am Mechanical Design Engineer. I have several years of experience in product designing, especially in AutoCAD and Solidworks. I ha Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(57 Commentaires)
6.1
Sanjooz

Hi there, I am 3D artist with the experience of Six years in 3d designing field. I have great skill of 3d designing, I have good grasp of 3d printing program. I am using Solid work for 3d printable modeling. I have r Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(40 Commentaires)
6.1
oMarkhaled2020

Hello sir , I'm a professional designer. I have designed more Than 100 projects related to  (3d modeling, 3d rendering , CAD/CAM , Cad design, 2d Drawing, mechanical design, assembly design ,3d printing, mold design, Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(70 Commentaires)
5.9
EngOussamaBaaziz

Hi, I saw your project so I confirm that I can perform requested work with excellent quality. I am a mechanical engineer armed with 12 years of professional experience as an R&D engineer. 3D and 2D CAD design and FEM Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(35 Commentaires)
5.4
OKAYdesign

Hello, we can do this project for you ! We are a team of designers & developers PORTOFOLIO . https://www.freelancer.com/u/OKAYdesign GRAPHIC, PRODUCT, VIDEO 2D/3D ANIMATION: Photoshop After Effects Illustrator I Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(2 Commentaires)
5.4
Kingdragon2108

⭐Dear Client.⭐ I read your project description carefully, and I am very interested in your project now. As a highly skilled industrial engineer and CAD/product designer and, I have good experience in product design an Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(30 Commentaires)
5.5
thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic p Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(24 Commentaires)
5.5
JangXing2

Hello I am very interested in your project. I am a mechanical engineer and product designer. As highly skilled CAD/CAM designer. My skills are Solidworks, Autocad, CAD/CAM, Autodesk Inventor, Fusion 360 and mechanical Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(10 Commentaires)
5.2
ArchAls2Gd

Dear Client, We are a team of practising Architects and Designers both  on and off freelancer. Please do give us a chance at working on your prestigious project. We will ensure delivery of design and drawings as per Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 7 jours
(53 Commentaires)
5.2
xabhix

Hi there, I am an experienced mechanical design engineer in the design and development of a product. My skills are CAD/CAM, product design, 3D design, 3D modeling, making CAD model from photos, etc. in CATIA, SolidWork Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 3 jours
(31 Commentaires)
5.2
CADninja

Visit FairCAD Website to see our Portfolio... See the OUTPUT first and Pay LATER! Fixed or Hourly billing as the client prefer. 100% trackable hours, with time stamp and screenshots, which are included in the bills se Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 2 jours
(13 Commentaires)
5.0
dedierwanto2686

Hi,i am dedy.e from indonesia,i am engineer and product design,i am interested with your project,i can help you for make design 3d modellinga nd 2d deawing,i'm not just design product but i experience in manufacture,cn Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 2 jours
(30 Commentaires)
4.9
furkancakir

Hi. I'm Mechanical Design Engineer and Expert in CAD design, product design with photorealistic render, DFM, Interior/Exterior design, etc. If u give me this project I do the Best. Check my profile and send me message Plus

%bids___i_sum_sub_35% %project_currencyDetails_sign_sub_36% USD en 5 jours
(21 Commentaires)
4.7