En cours

DC motor controller

Hi.

I need electronics for controlling a DC motor.

The motor (12V car Wiper motor) is via gears connected to potentiometer. The two buttons (up/down) should move the motor to specified position (1V, 2V, 3V, 4V) on the potentiometer. All the inputs/outputs and power supply are 12V.

The inputs should be ESD protected and the driving the motor must stop if the motor doesn't reach position in certain time (overload protection)

Specifications:

Motor: 12V max 3A, car wiper motor with gears

Controller: Atmel Mega series

SW: C/C++

This is my first post on freelancer and I am delighted that you are interested in it.

My initial description was not so detailed so there was a lot of questions.

What I need is a "BOX" that would control my "DC Servo motor" by pressing buttons UP/DOWN. The ENABLE button must also be activated in order to work. The electronics must be placed in a enclosure with connection terminals.

I will not ship you any hardware or debugging tools. It is up to you to acquire all the electronic parts.

The microcontroller must be Atmel Mega series programmed in C/C++ or BASCOM not Arduino IDE.
For H-bridge driver L298 or similar can be used. (peak current at least 2.5A)

I have attached a picture of complete system.

Compétences : Programmation C, Génie Électrique, Electronique, Microcontrôleur, Mise en Page PCB

Voir plus : dc programming, c programming power, atmel c programming, series programming in c, programming power supply, SW, POWER SUPPLY, motor, gears, esd, dc, dc to dc, DC motor, dc dc, controller, car motor, atmel, programming electronics, 12v power supply, car driving, vlc net certain time, atmel programming, car max, car move, ajax reload page certain time

Concernant l'employeur :
( 13 commentaires ) Ljubljana, Germany

N° du projet : #2362890

Décerné à :

EEPL

Hi, I can do this project for You. Please check Your message box.

50 € EUR en 5 jours
(3 Commentaires)
3.9

30 freelance ont fait une offre moyenne de 151 € pour ce travail

MikroStar

hi,i can help.

400 € EUR en 10 jours
(63 Commentaires)
7.4
DamithaKD

Read Pm :)

250 € EUR en 10 jours
(25 Commentaires)
5.5
scribblerspk

I can do your project, for more details kindly see your mail box. Thanks.

250 € EUR en 20 jours
(12 Commentaires)
5.5
EugeneBel

Hello! I can do this device for you. Recently, I did a project similar to your project. Best regards, Eugene Sinkevich.

210 € EUR en 9 jours
(7 Commentaires)
5.2
rajvigneshtn

visit The Administrator removed this message for containing contact details which breaches our Terms of Service and [url removed, login to view] check PMB

110 € EUR en 5 jours
(7 Commentaires)
4.2
umarghaffar

hi i can do it please see PMB

100 € EUR en 2 jours
(9 Commentaires)
3.8
mandeeshc

Sir, We can do it as mentioned.

150 € EUR en 15 jours
(3 Commentaires)
3.9
IjlalB

Hi, please check your Personal Message Box for my bid details. Thanks

199 € EUR en 15 jours
(4 Commentaires)
3.9
kfanx

I can do it! Thanks!

250 € EUR en 10 jours
(1 Commentaire)
3.1
hoduong

Hi You I can do your project.

150 € EUR en 10 jours
(4 Commentaires)
2.9
FreelanceEngr

Hello, I am an electrical engineer and I have worked on microcontroller programming for many of my projects. I can do this project.

100 € EUR en 8 jours
(2 Commentaires)
1.7
juba92

i have a good experience in controlling motors also with MEGA series i believe i can make what you need

200 € EUR en 1 jour
(1 Commentaire)
1.1
sarveshsingh1991

hey i have seen ur project statement. I can definitely lead u to the completion of project. But there are few things that i am unable to understand is that why u are using potentiometer. and there are few things that w Plus

69 € EUR en 8 jours
(0 Commentaires)
0.0
suprabhat7

hello sir, i can make this for u, with atmel MCU, L298, and in C. I've did this type of work before. I can make this more efficient. thank you.

50 € EUR en 10 jours
(0 Commentaires)
0.0
zoxno6

Postovani simongrabar, imam interesantan predlog za [url removed, login to view] PMB. Pozdrav.

100 € EUR en 15 jours
(0 Commentaires)
0.0
onuron

hi. we can send a video after making the prototype.

100 € EUR en 3 jours
(1 Commentaire)
2.4
Ivanmid

I will have it done and shipped in 6 days. 6 days just because I will have to order the enclosure box for it, I do have everything else. I have working AtMega's 328p-pu and they work with internal oscillator so it will Plus

90 € EUR en 6 jours
(0 Commentaires)
0.0
suhasgowda

i can do ur project. i have experience with dc motor contrl using FPGA and micrcontrllers

200 € EUR en 8 jours
(0 Commentaires)
0.0
kremsys

I have experience in Embedded system development particularly in automation domain. I am involved in projects of stepper motor controller, BLDC servo, DC motor controller thoroughly i.e. from hardware development to mi Plus

80 € EUR en 20 jours
(0 Commentaires)
0.0
srjtmitra5

We will deliver whatever you have wanted within a very short span of time and at reasonable price. Our Organization has experience over more than 25 years in Instrumentation, Electronics and Mechanics. Official websit Plus

100 € EUR en 3 jours
(0 Commentaires)
0.0