Spacious Apartment Design - Maximize Utilization

# Final Apartment Design Requirements ## 1. Plot Information * **Plot Size:** 40 ft × 68 ft * **Front:** Road-facing * **Rear:** Dead wall (commercial side) * **Left Side Passage:** 2.5 ft * **Right Side Passage:** 2.5 ft ## 2. Ventilation & Boundary Requirements * The **rear wall is a dead wall** and must remain completely blind. * **No windows, doors, balconies, kitchen exhausts, or toilet ventilation** are allowed on the rear side. * Kitchens, bathrooms, and bedrooms should be ventilated from the **left or right side passages**. * The **2.5 ft left-side passage may be absorbed into corner rooms if required** to maximize usable space. * The **2.5 ft right-side passage** should be retained for ventilation and windows where needed. ## 3. Ground Floor Requirements * Provide **one large front parking area**. * Design **2 independent 2-bedroom apartments**. ### Each Ground Floor Apartment Shall Include: * 1 Master Bedroom with an attached bathroom. * 1 Standard Bedroom. * 1 Common Bathroom. * 1 Kitchen. * 1 Living/Dining Area. * Practical layout with minimal wasted space. ## 4. First Floor Requirements * Design **3 independent 2-bedroom apartments**. ### Each First Floor Apartment Shall Include: * 1 Master Bedroom with an attached bathroom. * 1 Standard Bedroom. * 1 Common Bathroom. * **Total Bathrooms: 2** * 1 attached master bathroom. * 1 common bathroom. * 1 Kitchen. * 1 Living/Dining Area. * Access through a central lobby or efficient circulation space. ## 5. General Design Guidelines * Maximize usable carpet area and room sizes. * Minimize unnecessary corridors and dead space. * Provide wardrobe space in bedrooms. * Ensure furniture placement is practical and comfortable. * Keep the design simple, symmetrical, and cost-effective to construct. * Maintain good natural light and cross-ventilation using the available side passages. * Do not place any openings on the rear dead wall. ## 6. Design Objective The final design should provide spacious, functional, and rental-friendly apartments while maximizing the use of the available plot area and complying with the ventilation and boundary constraints.

Project ID: 40519990