Deck Rebuild and Extension

@EdwardR048

Hello, I’m an experienced structural engineering professional with extensive experience reviewing residential deck designs, structural calculations, and permit requirements. I can review your existing drawings and structural analysis for the proposed 18-inch deck extension, including the cantilevered triple 2x12 beam, existing 6x6 posts and footings, and the required new support post. I can verify the design for applicable Arkansas residential building and deck requirements, including loads, connections, pressure-treated lumber, railing requirements, and foundation adequacy. I can also provide clear review comments and coordinate the final documentation and PE certification through an Arkansas-registered engineer as required. I can review the drawings and calculations promptly and provide an estimated turnaround after seeing the existing documents. Best regards,

@aarong06

Hello, I am an Arkansas-Licensed Professional Engineer with experience in residential wood-framed decks, cantilevers, and existing-structure modifications. Since you already have drawings and structural calculations prepared, I can focus efficiently on reviewing the proposed 6-ft to 7.5-ft deck extension, triple 2×12 beam, joist/cantilever conditions, existing 6×6 posts and footings, new post requirement, connections, and railing loads for applicable code compliance. I’ll identify any necessary revisions and provide the signed/sealed engineering documents required for the City once the design is confirmed. I’m comfortable collaborating with technically experienced clients and can keep the review focused rather than unnecessarily redesigning work that is already sound. I can provide relevant project examples and confirm turnaround after reviewing your current drawing and calculation package. Best Regards Aaron

@ronald626

Hello, I can review the existing deck design and the proposed 18-inch extension with a focus on structural adequacy and permit requirements. * Review the existing drawings and structural calculations * Check the triple 2x12 beam, 6x6 posts, footings, and proposed cantilever * Evaluate the new post required by the city and its load path * Verify the proposed pressure-treated framing and railing conditions * Provide marked-up recommendations and the necessary engineering documentation I have extensive residential structural engineering experience with decks, additions, beams, posts, and existing-structure modifications. Your existing calculations and detailed drawings will provide a strong starting point for a focused engineering review. Please send the drawing and analysis package for review. Best Regards, Ronald

@luccam6

Hello, I am interested in assisting with the structural review of your upper deck extension. The proposed change from a 6-foot-wide deck to approximately 7.5 feet makes it important to verify the existing beam, supports, cantilever, and foundation conditions together. I can review the information you have prepared and provide: * Independent structural verification * Beam and framing review * Post and footing evaluation * Connection and load-path review * Recommendations for the required new support * Permit-oriented structural revisions where needed I have extensive experience with residential structural work and existing-structure alterations. I am comfortable reviewing professionally prepared calculations and drawings and can communicate any required changes clearly and directly. The existing railing and proposed pressure-treated construction can also be incorporated into the review. Thank you for considering my proposal. Warm regards, Lucca

@maevek2

Dear Client, I can provide a focused structural engineering review for your proposed upper-deck extension. Since you have already prepared the drawings and structural analysis, I would begin by checking the assumptions, loads, member capacities, connections, and existing support conditions rather than duplicating information unnecessarily. Particular attention will be given to the triple 2x12 laminated beam, 6x6 posts, existing concrete footings, proposed cantilever, and the new beam-to-ground post requested by the city. I can also review how the pressure-treated framing and existing railing integrate with the revised deck. My experience covers residential structural design and modifications to existing structures, including decks, porches, beams, posts, and foundations. The objective will be a clear, technically sound review that identifies any changes required for the proposed extension and supports the permit process. I look forward to reviewing the plans and calculations.

@tatums1

Hello, I can assist with the structural review of your existing upper deck and proposed 18-inch extension. Since you already have a detailed design and calculations, I can focus on verifying the critical structural elements and identifying any adjustments needed for approval. * Review the existing and proposed framing configuration * Verify the capacity of the existing triple 2x12 laminated beam * Check posts, footings, cantilever action, and load transfer * Review the required new support extending to the ground * Provide engineering feedback and documentation for the revised design I have extensive residential structural experience involving decks, exterior structures, wood framing, and modifications to existing construction. I understand the importance of evaluating the complete load path when extending an existing deck. I can work from your drawings and calculations and provide a focused professional review.

@stevend172

✅ Ready to jump in and get this done the right way—clean, fast, and reliable. ✅ I understand you’re extending the existing upper deck from 6 ft to 7.5 ft, with the new section cantilevering over the existing triple 2x12 laminated beam. I can review the drawings and structural calculations with particular attention to the existing beam, 6x6 posts, 24" deep footings, load transfer, and the new post required by the city. My background is in residential structural engineering, framing, load-path analysis, foundation design, and construction drawings. I’ll carefully check the proposed extension, connections, member capacities, footing/load transfer, and the interaction between the existing and new construction. I’ll also account for the pressure-treated lumber requirement and coordination with the existing railing and metal balusters. If you provide the current drawings, calculations, dimensions, and any city comments, I can review the package systematically and identify any revisions needed before final engineering/approval. I’m ready to review the existing design and work through the structural details with you.

@kevinl401

Hi , As a Licensed P.E. in AR and a member of Land Development Engineering Company (LDE), I can review your calculations and drawings with particular attention to the existing triple 2x12 laminated beam, cantilever condition, 6x6 posts, 24-inch-deep footings, and the new post required by the city. I’ll check the proposed framing and connections for the additional 18-inch projection, verify the load path back to the existing beam and foundations, and review the pressure-treated framing and existing railing/metal baluster configuration for code compliance. Deliverables : ✔ Review of structural drawings and calculations ✔ Verification of beam, posts, footings, and connections ✔ Review of the proposed new post and load path ✔ Code review for the modified deck and railing ✔ PE comments, revisions, and engineering documents as required The review will be based on the applicable Arkansas building code and local requirements for residential deck construction. To get started, I’ll need: ✅ Your current drawings and structural calculations ✅ Beam, post, footing, and connection details ✅ Photos of the existing deck and railing ✅ Any comments or requirements already provided by the city Once I review the information, I can give you a clear timeline and identify anything that needs to be corrected before submission.

@davids0344

Hello, I can help review your drawings and structural calculations for rebuilding the upper deck and increasing its width from 6 to 7.5 feet. I am a Professional Engineer licensed in multiple states with over 10 years of residential structural design experience; Arkansas registration would need confirmation before accepting the required review and sealing scope. My review will focus on the increased cantilever, joist backspan, existing triple 2×12 beam, and connections under the revised loads. I will also evaluate the 6×6 posts, existing footing dimensions and bearing conditions, and the proposed new post’s load path to the ground without assuming the lower deck can support additional loads. For the pressure-treated framing, I will address lumber specifications and compatible connectors. Reusing the railing will depend on its condition, guard-post attachments, height, and baluster spacing. Deliverables can include marked-up drawings, reviewed calculations, and details for necessary reinforcement, connections, and new supports. Please send your analysis, framing plans, site photos, beam specifications, and footing information. After reviewing those materials, I can confirm the scope, turnaround, and relevant work samples available for your review. Thanks!

@andrewj584

Dear Client! I have checked your requirements, and I can review your existing upper-deck drawings and structural calculations for the proposed 18-inch extension, including the cantilever over the existing triple 2x12 laminated beam, posts, footings, connections, and pressure-treated framing. With extensive residential structural engineering experience, I can verify the proposed framing against applicable deck, gravity, lateral, and connection requirements and incorporate the City’s requirement for a new post extending from the beam to the ground, while reviewing the existing railing and metal baluster reuse. I can review the drawings and calculations you provide first, confirm the required Arkansas PE review/seal scope, and then provide a clear timeline and fee for completing the permit-submission package. Best Regards!

@marktaylor356

Hello, With over 50 years of combined construction experience, including extensive hands-on work in interior remodeling and project execution, my team and I bring a unique blend of design expertise and practical understanding to your deck rebuild and extension. I'm a registered PE with an Arkansas license and intimately familiar with local codes, making me excellently positioned to review your plans and structural calculations. I've undertaken numerous successful residential projects that involved everything from demolition and framing to plumbing and electrical coordination. This varied background ensures that not only will we be able draft up clear and accurate plans for your deck extension, but also understand how those designs will actually be implemented on the field. Our focus is always on accuracy, coordination and clear communication - traits that are crucial for a project of this nature. Allow my team to use our proficiency in construction consulting, architectural drafting support, BIM modeling to turn your project ideas into buildable drawing sets that will navigate smoothly through the planning, permitting, coordination and installation stages. Don't leave anything to chance - choose us for meticulous execution from the very start! Thanks!

@richardw000

Hi, I’m a Professional Structural Engineer experienced in residential deck structures, structural calculations, load paths, connections, and code-compliant plan review. I can review your existing drawings and calculations for the 18-inch deck extension, evaluate the existing laminated beam, posts, footings, cantilever, and required new support, and provide engineering comments/details for permitting. I can also coordinate with your structural detailer and work toward an Arkansas PE-sealed package where applicable.

@AshleyH1023

Dear client, Hi, I can review your deck plans and structural calculations remotely for the 18-inch extension. I’ll check the beam, joists, posts, footings, connections, and railing for code compliance. Do the calculations include the new cantilever loads? Can you provide the existing drawings and site photos? Best, Ashley.

@stevenp144

Hello, I can help with the structural evaluation of your existing upper deck and proposed 18-inch extension. The existing conditions you described provide a good starting point, particularly the triple 2x12 laminated beam and 6x6 posts on concrete footings. My review would include the cantilevered deck framing, existing beam capacity, reactions, post and footing capacity, connections, lateral stability, and the proposed new post running from the beam to the supporting ground below. I can also review the pressure-treated lumber specifications and the existing railing that you intend to reuse. I understand that the city requires an Arkansas-registered engineer, so the final sealed documents would need to come from an appropriately licensed Arkansas PE. Please provide your current drawings and structural analysis along with the project address/jurisdiction and any comments from the city. I can review the material and confirm the remaining engineering work and timeline.

@JohnService003

Hello, no problem. I am an Arkansas-registered Professional Engineer with extensive experience in residential deck design, cantilevered framing, and code compliance. I will review your drawings and structural analysis for the upper deck extension (6' to 7.5', cantilevered over triple 2x12 beam), evaluate the existing posts and footings, and confirm the need for a new post from beam to ground. I will also verify the reuse of your existing railing and pressure-treated lumber requirements. I will provide stamped review/calculations for city approval. I am ready to begin as soon as you share the drawings and structural analysis. Sincerely, John