
Completed
Posted
Paid on delivery
I am looking for a paid, focused Autodesk Fusion tutorial covering basic modelling and the calculation of a camper vehicle’s centre of mass and mass moments of inertia. I have experience with other 3D programs, but I have never used Fusion. I therefore need a brief introduction to creating, sizing and positioning simple objects, followed by the calculation workflow. I am an Apple Macintosh user, but the tutorial does not need to be Mac-specific. Please provide a short screen-recorded video for my personal use, showing the necessary steps and menu commands. The narration can be in English, German or Spanish. In Spanish, please explain technical terms in plain language, as I am unfamiliar with the specialised vocabulary. ChatGPT has suggested that these calculations are possible in Fusion. Please verify this yourself before accepting the task, including whether the assembly’s inertia can be obtained about axes through its combined centre of mass. For a quick check: in the Design workspace, right-click the top-level component in the Browser and open Properties → Physical to inspect the assembly’s mass, centre of mass and moment-of-inertia values. Inspect → Center of Mass also displays the centre of mass in the model. Please check the reference point and axes used for the inertia values. Please demonstrate how to: * Create boxes for equipment and tanks, and cylinders or hollow cylinders for wheels, as solid bodies, each in a separate component. * Enter dimensions and assign the physical properties needed for the calculations. I already have each object’s volume, mass and calculated density, and can provide these values. Please show how to use them so that each modelled object has the correct mass. * Position the components accurately using vehicle coordinates: X forward, Y sideways and Z upward. * Obtain the complete assembly’s total mass, centre-of-mass coordinates and mass moments of inertia for roll, pitch and yaw about axes through the combined centre of mass. * Move equipment or change tank contents and update the results. Please explain the reference axes, units and limitations of simplified shapes. I only need the basic modelling tools required for this task, without detailed modelling, rendering or structural simulation. Please let me know your price and estimated video length. (Iam sorry, the budget is not 100‘000 US $, , but 100-200 $).
Project ID: 40751041
18 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
18 freelancers are bidding on average $94 USD for this job

Drawing on my extensive experience in engineering and architectural designs, I am confident I can create a tailored Autodesk Fusion tutorial that precisely caters to your needs. As an expert in 3D modelling, including with Autodesk Fusion 360, I have a deep understanding of the software's capabilities. I will deliver screen-recorded videos that cover every step you need to take in creating, positioning, and sizing the specific shapes you mentioned. Furthermore, my familiarization with Axies and reference points in Autodesk Fusion ensures I can explain their use and limitations effectively. Another boon to this project is my fluency not only in English but also German and Spanish. This guarantees clear communication during the tutorial narration, especially in Spanish where I can simplify complex technical terms for you. Also, being well-versed with Mac OS as an Apple user myself, you don't need to worry about the tutorial being platform-specific. Understandably, your budget might not be at ChatGPT's scale! But for $100-200, I assure you a highly professional and comprehensive tutorial-estimated between 20-40 minutes long incorporating your requirements. With all these skills and qualities, it would be an absolute honor to help you understand Autodesk Fusion better and get those Moments of mass and inertia rolling efficiently within your camper vehicle!
$95 USD in 2 days
7.8
7.8

As the founder of NextVideo Studio, I'm delighted to offer you my expertise in your Autodesk Fusion tutorial project. With extensive experience in 3D modelling and engineering, I have a profound understanding of how to navigate and leverage the breadth of tools Fusion offers. Rest assured, this includes the calculation of centre of mass and mass moments of inertia. I am also adept at working with simplified shapes, which is ideal for your requirement. In our tutorial, I will guide you through each step methodically and clearly, providing a screen-recorded video tailored to your need. As a multilingual speaker fluent in English, German, and Spanish, I can seamlessly explain technical terms in plain language making it easier for you to follow along and grasp all the necessary concepts. Understanding your specific needs, my explanation will revolve around reference axes, units and limitations of simplified shapes without delving into rendering or structural simulation. My goal is to provide you with the knowledge and confidence to not only create precise models but also manipulate them - such as moving equipment or changing tank contents – while updating the required values. To tackle every aspect of your project effectively within your budgetary framework, let's discuss further details. Choose NextVideo Studio for a personalized and comprehensive Autodesk Fusion experience!
$140 USD in 2 days
5.7
5.7

Hello, I can provide clear and practical Autodesk Fusion 360 tutorials tailored to your exact needs. I have 10+ years of experience in CAD, mechanical design, 3D modeling, and manufacturing workflows. I can guide you step-by-step through sketches, constraints, 3D modeling, assemblies, parametric features, and exporting files, using simple explanations and real project examples. I can also record screen-based lessons so you can easily follow and repeat each workflow. I’m ready to start immediately. Please share the topics or tasks you want to learn, and I’ll structure the tutorial accordingly. Best regards, StarSpark3D
$49 USD in 3 days
5.6
5.6

I can create the focused Fusion 360 tutorial you need, starting from the basic modelling workflow and then building up to the complete vehicle mass, centre-of-mass and inertia calculation. I have verified that Fusion provides physical properties including mass, centre of mass and moments of inertia for components/designs, including world-coordinate inertia values and principal moments. I can demonstrate how to set up your simplified equipment, tanks and wheels as separate components, assign the required physical properties, position everything using your X/Y/Z vehicle coordinate system, and then obtain the combined results. The tutorial will specifically cover: • Creating simple boxes, cylinders and hollow cylinders • Setting the correct mass/density for each component • Accurate X/Y/Z positioning • Total assembly mass • Combined centre of mass • Roll, pitch and yaw inertia about the appropriate reference axes • Moving equipment/changing tank contents and updating results • Units, reference axes and limitations of simplified geometry I’ll record the workflow on screen with clear menu commands so you can repeat it yourself afterwards. I can keep the tutorial focused rather than spending time on unnecessary modelling or simulation features. Estimated video length: 30–45 minutes Turnaround: 2–3 days Fixed price: $125 USD
$125 USD in 2 days
4.7
4.7

Hi, Our 11+ years of experience with Fusion 360 and mechanical 3D modeling enables us to create a clear, focused tutorial covering basic component modeling and the complete mass-property workflow for your camper vehicle. We can demonstrate boxes, cylinders, and hollow cylinders as separate components, apply your provided mass and density values, position them accurately using X, Y, and Z coordinates, and inspect assembly mass, centre of mass, and moments of inertia. We will also verify how Fusion handles inertia about axes passing through the combined centre of mass, including reference axes, units, and practical limitations of simplified geometry. The screen recording will clearly show the required menu commands and update workflow when equipment or tank contents change. Would you like the tutorial delivered within your $100–200 budget? We can keep it concise and practical. Best Wishes
$100 USD in 3 days
4.9
4.9

Dear , I understand your need for a focused Autodesk Fusion tutorial on basic modeling and calculating a camper vehicle's center of mass and mass moments of inertia. With experience in 3D programs and a Mac user background, I can provide a detailed screen-recorded video tutorial in English, German, or Spanish, simplifying technical terms for better understanding. I will demonstrate creating components, assigning physical properties, precise positioning, obtaining total mass, center-of-mass coordinates, and mass moments of inertia. I will also show how to update results dynamically. My approach will focus solely on the required tools for this task without unnecessary complexities. For similar projects, please refer to my portfolio: https://www.freelancer.com/u/alphatechca Looking forward to discussing this further with you. Best regards,
$50 USD in 1 day
3.1
3.1

Hello, I reviewed the tutorial requirements, and the key challenge is demonstrating a reliable Fusion workflow that correctly assigns physical properties, positions components by vehicle coordinates, and extracts mass, centre of mass, and inertia about the combined centre of mass. I would cover the essential component and primitive modelling tools, custom mass properties, assembly positioning, Physical Properties, reference axes, and how changes to equipment or tank contents propagate through the calculations. I have experience with Fusion 360 modelling and engineering workflows and can provide a clear screen recorded tutorial with the relevant menu commands and calculation checks. Also a quick question, should the final inertia values be reported specifically as roll, pitch, and yaw components aligned with your vehicle X Y Z axes? Best Regards, GridSmithLTD
$30 USD in 1 day
2.3
2.3

Hi, I understand this is not about learning Fusion 360 generally — it is about building a reliable engineering workflow for a camper vehicle mass-property study. I will create a focused screen-recorded tutorial showing the exact process I would use as a product engineer: Build simplified component models (equipment, tanks, wheels) as separate Fusion components Assign real mass values from your data Position everything using vehicle X/Y/Z coordinates Verify the assembly center of mass and inertia reference axes Calculate roll, pitch, and yaw moments about the combined center of mass Update results when moving equipment or changing tank loads I will also explain the engineering meaning behind the numbers, coordinate systems, units, and the limitations of simplified geometry — not just click through menus. I can deliver a clear 30–45 minute video with practical examples within 2–3 days. My fixed price is $150. I would approach this as an engineering calculation guide, not a basic software tutorial. Best regards, Zhai Kun
$150 USD in 3 days
1.5
1.5

Hi, good day. I understand you need a focused Fusion tutorial that first covers simple component modelling and positioning, then demonstrates how to assign correct mass properties and obtain the complete camper assembly’s mass, centre of mass, and inertia values about axes through the combined centre of mass. I have experience with Autodesk Fusion and mechanical modelling, and I can demonstrate separate components for boxes, solid/hollow cylinders, coordinate-based positioning, custom physical properties, and the Physical/Center of Mass tools, while clearly explaining the inertia reference point, roll/pitch/yaw axes, units, and limitations of simplified geometry. I’ll also verify the assembly inertia workflow and show how moving equipment or changing tank mass updates the results, with a concise screen recording focused only on the commands you need. I’d be glad to review your object data and discuss the tutorial requirements further. Do you want the tutorial narrated in English, German, or Spanish? Will your final vehicle coordinates use metres or millimetres? Do you already have a Fusion assembly started? Best regards.
$140 USD in 7 days
0.0
0.0

Hi there, I can handle your project "Autodesk Fusion Tutorial: Basic Autofusion skills and Moments of mass and inertia" and create precise 3D models and high-quality renders matching your exact dimensions. Here is what I will do for you: 1. Model Setup: Build the accurate 3D geometry from your sketches, dimensions, or reference files. 2. Materials & Lighting: Apply realistic textures, materials, and studio lighting for crisp, photorealistic presentation. 3. Final Deliverables: Provide all required 3D source files (STEP, STL, OBJ, FBX) and high-resolution render images. Zero Risk: You can inspect the 3D draft views and verify all measurements before releasing any milestone payment. Quick Question: Do you have technical drawings or reference images with measurements ready, and what specific file format do you need for final use? Best regards, Ridwaan M
$51 USD in 1 day
0.0
0.0

Hello, I can create a clear, focused screen-recorded Autodesk Fusion tutorial covering exactly the workflow you described, from basic modelling through the calculation of the camper vehicle’s mass properties. I have experience with 3D modelling and CAD software, including Autodesk workflows, and can keep the tutorial practical rather than spending time on unnecessary modelling, rendering, or simulation. The tutorial will demonstrate: • Creating separate components for boxes, tanks, cylinders and hollow cylinders/wheels • Entering dimensions and assigning the correct physical properties/mass using your supplied volume, mass and density values • Positioning components accurately using X (forward), Y (sideways) and Z (upward) vehicle coordinates • Checking total assembly mass and centre-of-mass coordinates • Obtaining the assembly mass moments of inertia and explaining the reference point and axes used by Fusion • Determining roll, pitch and yaw inertia about axes passing through the combined centre of mass • Moving equipment/changing component properties and updating the calculations • Understanding units, coordinate systems, reference axes and the limitations of simplified geometric models
$80 USD in 7 days
0.0
0.0

CLEAR GUIDANCE: Your Fusion tutorial needs precision. To create a focused Autodesk Fusion tutorial for you, I’ll start with a brief introduction to basic modeling, ensuring you can create, size, and position simple objects like boxes and cylinders. I will demonstrate how to enter dimensions and assign the physical properties using the values you provide. Next, I’ll guide you through the workflow for calculating the camper vehicle’s center of mass and mass moments of inertia. This includes obtaining the total mass and ensuring accurate positioning with respect to your vehicle coordinates. The screen-recorded video will be in Spanish, with technical terms explained in plain language. I estimate the video will be around 30 minutes long. My price for this tutorial is $150. Are there any specific dimensions or properties you want me to include in the tutorial? Kind regards, Ethan
$100 USD in 8 days
0.0
0.0

I’m a Fusion 360 / CAD instructor with 13+ years of experience in 3D modelling, mechanical design and engineering calculations. I can create a concise screen-recorded tutorial specifically for your camper-vehicle mass-property workflow, starting with the basic Fusion tools you actually need and avoiding unnecessary modelling features. The tutorial will demonstrate: • Creating boxes, cylinders and hollow-cylinder/wheel components • Keeping each object in a separate component • Entering dimensions and assigning correct physical mass/density • Positioning components using X = forward, Y = sideways and Z = upward • Checking total assembly mass and centre of mass • Accessing Fusion’s Physical Properties and moment-of-inertia results • Understanding the reference point and axes used by Fusion • Obtaining roll, pitch and yaw inertia about the combined centre of mass • Moving equipment/changing tank mass and updating results • Units, coordinate systems and limitations of simplified geometry I’ll also verify the Fusion workflow and the assembly inertia reference before recording, rather than simply assuming the suggested procedure is correct. Estimated video length: 20–30 minutes Price: $150 fixed Delivery: 2–3 days
$30 USD in 2 days
0.0
0.0

Hello, I am a 3D Video and Animation Artist. I can create professional 3D animated videos based on your ideas, sketches, images, or requirements. I can create smooth camera movements, realistic-looking scenes, lighting, materials, and an engaging fly-through video.
$90 USD in 7 days
0.0
0.0

Zurich, Switzerland
Payment method verified
Member since May 3, 2025
$30-70 USD
min €36 EUR / hour
$30-250 USD
min $100000 USD
$1500-3000 AUD
₹1500-12500 INR
£250-750 GBP
₹1500-12500 INR
₹600-1500 INR
₹100-400 INR / hour
$250-750 USD
₹1500-12500 INR
$10-30 USD
£20-250 GBP
₹600-1500 INR
£10-20 GBP
$15-25 USD / hour
$30-250 USD
$20-60 USD
₹1500-12500 INR
$8-15 AUD / hour
$1500-3000 USD
₹600-1500 INR
₹600-1500 INR