Protel design systememplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    114 protel design system travaux trouvés au tarif de EUR

    We would like to find a party that is very familiar with KiCad P...to awarding the project. On successful completion of this project we would then want to discuss other ongoing projects migrating a series of PCB Schematics and layouts from Protel Windows to KiCad. Therefore we will be looking at candidates potential to assist with this on going work.

    €202 (Avg Bid)
    €202 Offre moyenne
    24 offres

    Skills Required: • Designing Schematics of Digital and Analog Circuits • Designing Single Layer and Multi-layer PCB. ...verification on software and hardware.speciality- • EMI-EMC Layout guid-lines. • Standards compilation (UL, CE) • Good command over Embedded Hardware design. • Proficient in tools like Altium, Protel, Gerb tools etc.

    €307 (Avg Bid)
    €307 Offre moyenne
    33 offres

    - Control of the existing 2-layer Et...functionality - Modification of the scheme if an error is detected - The scheme was created with Protel 99SE (PCB Layout Design) - Make a prototype printed circuit board - Testing - Prototype surrender - Predicting a computer with a design scheme with the Protel 99SE program in a file with the final scheme.

    €18 / hr (Avg Bid)
    €18 / hr Offre moyenne
    24 offres
    PCB Design Engineer S'est terminé left

    ...specialist in PCB design, RF Design, Product Design, Consulting Services, Product Software Development, PCB Production and Assembly services which will give added value to the customers who are looking for a one-stop solution provider for all their requirements. Please visit [se connecter pour voir l'URL] Job Description Position: PCB Design Engineer - Co...

    €4 / hr (Avg Bid)
    €4 / hr Offre moyenne
    17 offres

    jest projekt w eaglu, trzeba przenieść go do protel 99 se (I TYLKO DO TEGO PROTELA) projekt składa się z dwóch płytek - małej z prockiem + dużej z resztą mam pliki do eagle (schematy i pcb), mam pliki schematów w protel 99se do zrobienia: - dodanie do projektu w protelu plików projektu płytek pcb - przeniesienie (zaprojektowanie elementów, pad&oacu...

    €128 (Avg Bid)
    €128 Offre moyenne
    3 offres
    Windows -- 2 S'est terminé left

    I need to do some troubleshooting for PROTEL HOTEL MANAGEMENT software.

    €113 (Avg Bid)
    €113 Offre moyenne
    7 offres

    A printed circuit board layout must be checked against the schematic to confirm that there are no short circuits or unrouted tracks. The files are provided in Protel format.

    €307 (Avg Bid)
    €307 Offre moyenne
    24 offres

    The requirement is to check a printed circuit board layout against the schematic and make sure that there are no unrouted or short circuited tracks. The files are ...requirement is to check a printed circuit board layout against the schematic and make sure that there are no unrouted or short circuited tracks. The files are supplied in Protel format.

    €308 (Avg Bid)
    €308 Offre moyenne
    13 offres
    Windows S'est terminé left

    i have protel hotel management and i need technical support local in kuwait

    €103 (Avg Bid)
    €103 Offre moyenne
    5 offres
    pcb project S'est terminé left

    project of pcb in ONLY protel 99 se i have some in eagle

    €32 (Avg Bid)
    €32 Offre moyenne
    7 offres

    i need person who redraw board from eagle to (ONLY) protel 99 se and do some correction in this job create of element's packages correct pcb from new schematic (in protel's sch) some element add correct pinout lcd corect drawing of the packages

    €48 (Avg Bid)
    €48 Offre moyenne
    3 offres
    Trophy icon Hire a Logo Designer for Protel S'est terminé left

    The logo we need is for PROTEL we are a call center/ call center provider so anything to do with phones or in this type of theme. We need Vector File, Stationery Designs, High Resolution logo , Logo Transparency, Source File, 3D Mockup, Social Media Kit, business card and letterhead.

    €66 (Avg Bid)
    Garanti
    €66
    119 propositions

    jest schemat i płytka w eagle trzeba to przenieść do protela 99 se schemat już jest przeniesiony - trzeba sprawdzić jedynie płytka jest w eagle - ma być w protelu 99 se, pady mają być identyczne, jedynie ścieżki pogrubione na tyle na ile się da

    €56 (Avg Bid)
    €56 Offre moyenne
    4 offres
    P.C.B. design S'est terminé left

    I designs P.C.B. Single layer or P.T.H. in Protel software.

    €317 (Avg Bid)
    €317 Offre moyenne
    21 offres

    do zaprojektowania płytka drukowana - załączam schemat, mam już narysowaną płytkę i złącze, trzeba dorobić scalaki

    €18 (Avg Bid)
    €18 Offre moyenne
    3 offres

    szukam osoby która poprawi mi płytkę drukowaną w TYLKO i WYŁĄCZNIE w protelu 99 se... płytka jest płytką jednostronną, i taką ma pozostać... chodzi o: - zmniejszenie ilośći zworek/mostków na górnej stronie - zmniejszenie płytki - dodanie diody i dipswitcha do płytki i schematu

    €19 (Avg Bid)
    €19 Offre moyenne
    4 offres
    Get a Website Built -- 2 S'est terminé left

    website protel and education service provider

    €344 (Avg Bid)
    €344 Offre moyenne
    61 offres

    The Protel files for the printed circuit board is supplied. The schematic is complete as well as the PCB design and some of the component placement. The printed circuit board component must be checked and the board routed

    €287 (Avg Bid)
    €287 Offre moyenne
    22 offres
    pomoc w Protel DXP S'est terminé left

    w protelu 99 se można było wygenerować ze schematu i z pcb oddzilne netlisty, a później je porównać, czy nie ma różnic... szukam osoby która pomoże mi zrobić to w protel dxp

    €16 (Avg Bid)
    €16 Offre moyenne
    2 offres
    Altium circuit diagrams S'est terminé left

    The project is to redraw the circuit diagrams in Altium/ Protel format. Later we will get you to create some circuit for our new products We need a quote for the attached circuits but not including the last 2 pages. They will need to fit on A4 paper

    €90 (Avg Bid)
    €90 Offre moyenne
    16 offres

    The objective of the project is to modify the design of the Texas Instruments demonstration board for the UCC28180D Active Power Factor Correction IC. The reason for the design modification is to: 1. Change the PCB mechanical design. 2. Increase the power rating of the circuit by changing certain component values, i.e. the power MOSFET and other

    €1099 (Avg Bid)
    LDN
    €1099 Offre moyenne
    3 offres

    Design baseboard PCB Layout for MYC-JA5D4X CPU Module ([se connecter pour voir l'URL]). Project of orginal development board (MYD-JA5D4X - [se connecter pour voir l'URL]) is available. Baseboard properties: MYC-JA5D4X SOM Supply voltage 18-36V (to integrated DC-DC converter) LCD RGB 16/18-bit + capacitive touch panel connector

    €303 (Avg Bid)
    €303 Offre moyenne
    1 offres

    Design baseboard PCB Layout for MYC-JA5D4X CPU Module ([se connecter pour voir l'URL]). Project of orginal development board (MYD-JA5D4X - [se connecter pour voir l'URL]) is available. Baseboard properties: MYC-JA5D4X SOM Supply voltage 18-36V (to integrated DC-DC converter) LCD RGB 16/18-bit + capacitive touch panel connector

    €51 - €508
    Scellé
    €51 - €508
    11 offres

    We own a Hotel in Switzerland and need help in marketing the hotel, someone who has knowledge of hotel business and PROTEL system. Able to do some telemarketing and contacting companies to look for potential clients etc. Able to offer virtual assistance as a receptionist at times and needs to speak perfect either italian or english ideally both and

    €9 / hr (Avg Bid)
    €9 / hr Offre moyenne
    14 offres
    PCB layout and schematic S'est terminé left

    i Have a pcb layout in PDF both layers and solder mask and also in protel 2.7 .pcb file and solder mask and BOM in excel. I would like the pcb layout to be done in Proteus 8 and also work out schematic which is not existing. The design must be ready for simulation after completion i will not give the hex file for the microcontroller

    €91 (Avg Bid)
    €91 Offre moyenne
    18 offres
    Design me a Product S'est terminé left

    We are interested in making WiFi router,Flash drive and Power Bank of our brand hence we require PCB designs . Specification: All Protel, Altium and Eagle design files for Quotation only, You must provided us with a full set of Gerbers in RS-274X format with drill files for Manufacture, As there are sometimes compatibility issues between different

    €436 (Avg Bid)
    €436 Offre moyenne
    7 offres
    PCB Design S'est terminé left

    ...ready and approved for fabrication and assembly. Boards are not too complicated. Time estimates are about 24 hrs for 7x5in board and 8 hrs for 3x4in board. Files are in Altium/Protel. Ready for approval means: 1. no constraint violations; 2. BOM and CPL files produced; 3. Gerbers (x274) 4. Board Outlines 5. Fab notes Files will be sent to manufacturer

    €406 (Avg Bid)
    €406 Offre moyenne
    22 offres

    Hello, I have wordpress website and want to add booking though ([se connecter pour voir l'URL]) to the website using API. It would be highly recommended if you have any experience with Protel.net. Thanks.

    €266 (Avg Bid)
    €266 Offre moyenne
    6 offres

    Vamos desenvolver um site em Umbraco, e queremos utilizar o add-on da Protel para a gestão de reservas.

    €1335 (Avg Bid)
    €1335 Offre moyenne
    10 offres

    ...schematic conversion from Protel Advanced Schematic to and OrCAD design file (.dsn). The original design was done in Protel Advanced Schematic 2.0 (actually 2.2) and we want it converted to OrCAD so we can read it with OrCAD 9 or 10. It is only one schematic and it is only several pages. You would need a working copy of Protel Advanced Schematic 2.0

    €26 (Avg Bid)
    €26 Offre moyenne
    1 offres
    Alarm design S'est terminé left

    Reverse engineer a product and produce, PCB layout and circuit diagram. The ...shell. The sample boards can be shipped to you. This is a small project which would suit anyone familiar with PCB design and electronics. The files will need to be provided in Protel formal and ready for PCB production. The board design is considered to be very basic.

    €290 (Avg Bid)
    €290 Offre moyenne
    32 offres
    PCB Designer S'est terminé left

    Need to get designs on protel software.

    €138 (Avg Bid)
    €138 Offre moyenne
    14 offres
    PCB Layout work S'est terminé left

    We require some one to take an existing design which has the schematic layout and the pcb design and convert into a protel file for manufacuture. Attached is a copy of the schematic and pcb board top and bottom layout. Please do not bid if you have never done pcb layout before as you will lack the skills to be able to complete the task.

    €447 (Avg Bid)
    À la une
    €447 Offre moyenne
    39 offres

    Hello, have protel pcb data and need reversed it into Eagle to schematic br Julien

    €368 (Avg Bid)
    €368 Offre moyenne
    14 offres

    A design for a pH electrode amplifier was created using the reference PDF linked below. The engineer did not understand the concept of guard ring and therefore the design must be fixed to incorporate the guard ring as specified in the document. Please provide proposal of how you will correctly implement guard ring. Deliverables will be in the form of

    €137 (Avg Bid)
    €137 Offre moyenne
    9 offres

    Need to create the schematics and PCB design for a circuit that runs off 3.3VDC power source and is able to convert the signal from 4-20mA 12VAC loop current sensor devices to a range of 0-3.3V DC that can be read by the microcontroller. Parts should be selected to maximize ratio of SMD. 4-20mA sensor will be connected via BNC connector. The output

    €142 (Avg Bid)
    €142 Offre moyenne
    14 offres
    PCB routing S'est terminé left

    We are a small, creative and innovative manufacturing company. We ...aluminium PCB, 80 x 80 mm for high power LEDs and a driver. Project 2) Double sided PCB, 80 x 80 mm. We will provide schematics in Protel / Altium and a mechanical layer DXF. Layout should be completed in Protel / Altium format. Good English is essential for communication.

    €625 (Avg Bid)
    €625 Offre moyenne
    37 offres

    ...productivity. The app must be very simple to use like [se connecter pour voir l'URL] But possess some other key features for management reasons. I would like to have a Crm System built in that would allow me the (salesmanager) to view what all of my salespeople are doing on a specific day from one screen. I would like to be able to upload contracts

    €16 (Avg Bid)
    €16 Offre moyenne
    6 offres

    I have a PCB layout complete with original PFW files and generate...and the manufacturer part numbers added. The SY3FRPWM circuit is separate but I also need a separate BOM for this (attached [se connecter pour voir l'URL]). I can provide the original Protel for Windows (99SE) .PCB files if needed, so please let me know if you're willing to take on this project!

    €196 (Avg Bid)
    €196 Offre moyenne
    5 offres
    Switches 2013 S'est terminé left

    We need a PCB redesigned. See attached file We prefer Altium/ Protel software for the design. We will require the schematics and READY for manufacture project

    €89 (Avg Bid)
    €89 Offre moyenne
    22 offres

    ...Power Supervision System (PSS) The job is: a) To make a simple Power Supervision System based on a PIC processor circuitry, including hardware schematics, embedded PIC software, related PC software and full documentation. For details please see attached paper. b) Providing detailed and full drawn schematics in Altium (Protel) DXP Rev 7.2 format

    €1574 (Avg Bid)
    €1574 Offre moyenne
    18 offres
    DC-DC converters - repost S'est terminé left

    Design 3 types of switching isolated variable voltage output DC-DC converters. 1. Works include: - design (including initial analysis of alternative topologies); - full electrical calculations (including magnetics) documented in Word and Excel, allowing parameters variation in a spreadsheet; - full control loop and stability analysis at various

    €2932 (Avg Bid)
    À la une
    €2932 Offre moyenne
    12 offres
    DC-DC converters S'est terminé left

    Design 3 types of switching isolated variable voltage output DC-DC converters. 1. Works include: - design (including initial analysis of alternative topologies); - full electrical calculations (including magnetics) documented in Word and Excel, allowing parameters variation in a spreadsheet; - full control loop and stability analysis at various

    €1686 (Avg Bid)
    €1686 Offre moyenne
    15 offres

    Based in Penang Island. Possess knowledge of HDI/TUV & Load Boards Design & Schematic, Gerber knowledge is required, Experience in software (Cadence- Orcad, P-cad, Protel, Eagle, Camcastic and etc ) will be an advantage. [The Administrator removed this message for containing contact details which breaches our Terms of Service.]

    €144 (Avg Bid)
    €144 Offre moyenne
    9 offres

    ...Hotel Software) "Wellness" (also Wellness Software), "Cloud" (also Cloud Computing) and the software Brand name "Protel". Following targets: - with "Hotelsoftware" and "Protel" under the first 3 within 2-3 month - for the rest keywords, under the first 10 Questions: - are you interessded in this job? - what

    €260 (Avg Bid)
    €260 Offre moyenne
    1 offres

    I have a 240VAC ...fuse PCB . i need a low cost design and PCB Layout of a 8 Channel Bi Colour(Blue/Red) LED status PCB to monitor the state of each of the 8 PTC fuse. If the PTC is Closed cct (normal)status , LED will be Blue . a Fault(short or very low resistance) the Led will change to be Red . I already have a PCB size and on Protel File .

    €135 (Avg Bid)
    €135 Offre moyenne
    15 offres
    pcb designing S'est terminé left

    Expert in designing schematic of PCB designs using "CADStar" , "OrCAD", and Protel and BiCAD for designing Hybrids. Also experienced in CAM work.

    €267 (Avg Bid)
    €267 Offre moyenne
    4 offres

    ...the new PCB will have more or less the same design but will have 10 antenna instead. The 10 antenna will connect to the RFID chip through multiple CD4066 (driven by two 3-to-8-multiplexers, i.e. use 4 bits to select which one of the ten antenna will be used). The deliverable should be: 1. a PCB design with layout and components information, and

    €269 (Avg Bid)
    €269 Offre moyenne
    15 offres

    ...the new PCB will have more or less the same design but will have 10 antenna instead. The 10 antenna will connect to the RFID chip through multiple CD4066 (driven by two 3-to-8-multiplexers, i.e. use 4 bits to select which one of the ten antenna will be used). The deliverable should be: 1. a PCB design with layout and components information, and

    €177 - €266
    €177 - €266
    0 offres

    ...The job is: a) To make a simple RWC based on a processor circuitry, including one (1) Firmware prototype and full documentation. b) Providing detailed schematics in Altium (Protel) DXP Rev 7.2 format and a full Bill of Material including a minimum of 2 suppliers. A schematic must be provided for approval before layout work is begun. c) Make the program

    €1120 (Avg Bid)
    À la une
    €1120 Offre moyenne
    10 offres