Plc project outsourceemplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    2,000 plc project outsource travaux trouvés au tarif de EUR
    PLC Angoulême S'est terminé left

    Cherche un concepteur linux pour une duré de 6 mois à 1 an. deux jours par semaine sur site (Angoulême) et 3 jours en télétravail.

    €99 / hr (Avg Bid)
    €99 / hr Offre moyenne
    7 offres
    Commercial - Outsource Salesman S'est terminé left

    Hello, Je cherche une personne pour compléter mon équipe et aller démarcher des clients qui : - Cherche une agence pour créer des sites - Gérer des sites Prestashop Vous pourrez avoir accès à codeur et répondre aux différentes annonces de clients dans le but de signer le maximum de client.

    €29 / hr (Avg Bid)
    €29 / hr Offre moyenne
    16 offres

    Développement nouvelle interface de système de mixage de produit alimentaire. - Mesure PH de produit par le transmetteur ABB Endura APA592. - Mesure le tempérament du produit par PT100. - Mesure le niveau de citerne par le transmetteur de pression ABB 266HART. - Développement par plc siemens 1513 et pupitre siemens TP1500 comfort.

    €19 / hr (Avg Bid)
    €19 / hr Offre moyenne
    6 offres

    I am looking for a professional preferably a Business Plan Consultant to develop a comprehensive Business Plan for my CLIENT because I am a bit busy so I am happy to outsource at a reasonable price. The Business Plan must be written in professional FRENCH language. The business will be small in size basing in Fashion Industry, Consulting Professional Services and Imports and Exports of commodities. The plan should be in FRENCH and comply with French Business Plan standards to be used for French Business Visa Application. The ideal candidate must have extensive experience in writing a business plan; and also must be proficient in written French Language. Below are the details that should be incorporated in the business plan; - Research on the addressable market for the business&...

    €486 (Avg Bid)
    €486 Offre moyenne
    6 offres

    La finalité du projet est de pouvoir consulter des données collectées par un capteur de courants électriques communicant en Modbus sur une page web. La seule constante est le capteur de courant qui est déjà défini. Projet en deux parties: -Hardware: Le système d'acquisition doit être le plus simple possible, par exemple Raspberry-pi avec carte usb/modbus ou Arduino avec systeme c...de pousser les données sur un serveur ftp (ou autre en fonction des propositions). -Softwares: Réalisation d'un serveur SQL pour les données collectées et d'une page web simple pour afficher les données avec mise à jour au moins deux fois par jour. Le développeur peut proposer que ...

    €2408 (Avg Bid)
    €2408 Offre moyenne
    14 offres

    Informaticien / Automaticien développeur confirmé Delphi / Visual Studio / Wonderware / PLC Siemens Description des activités : - Analyse, développement, évolutions, installation, tests, maintenance de systèmes informatisés utilisés notamment pour des applications industrielles - Formation et support technique aux utilisateurs - Rédaction de cahiers des charges, de spécifications fonctionnelles et de dossiers de tests - Organisation, rédaction, gestion de la documentation technique des projets et des versions - Standardisation des applications et des méthodes de développement - Planification de projets, reporting - Veille technologique Formation et expériences souh...

    €32 / hr (Avg Bid)
    €32 / hr Offre moyenne
    1 offres
    Merakit beberapa Furnitur S'est terminé left

    welding,fabrikasi, merakit panel kontrol elektrikcal, plc programing

    €61 (Avg Bid)
    €61 Offre moyenne
    2 offres
    bonjour,,,,,,,,,,,,,,,,,,,, S'est terminé left

    je suis un ingénieur Automaticien Électricien, je cherche des opportunités et des projets à l’Afrique dans le domaine scada-plc et automatisation des procédés industrielles, gestion d'énergie, supervision, ,,,, si vous êtes intéressé, tu auras 10% comme commission sur chaque projet confirmé , tenez compte que certain projet atteint 400 milles dollars, alors tu auras dans ce cas 40 milles dollars à la fin de la signature du contrat ou bien de convention chez notre clients, ton rôle principale est de chercher dans le milieu industriel des industries qui sont en trains de chercher des bureau d'ingénierie dans le domaine d'automatisation des procédés industr...

    €141 (Avg Bid)
    €141 Offre moyenne
    1 offres

    I'm in need of a Delta PLC expert with proficiency in WPL SOFT for designing a new automation system tailored for the manufacturing industry. The project involves the following: - Designing: The primary goal of this project is to design the new automation system from the ground up. - Industry Focus: The system is specifically intended for the manufacturing sector. - Level of Complexity: The system should provide basic control and monitoring functionalities. The ideal candidate should have a comprehensive understanding and hands-on experience with Delta PLCs, expertise in WPL SOFT, and a solid background in designing automation systems for manufacturing environments. The ability to comprehend and implement basic control and monitoring functionalities is key. Exp...

    €125 (Avg Bid)
    €125 Offre moyenne
    5 offres

    ...This allows us to start-off with minimal manufacturing, concentrating on our immediate production needs, while simultaneously focusing on the development and growth of the business. (2) instead of investing a substantial amount of capital in the beginning on equipment cost, it may be more feasible to contract and outsource whatever work we can to local shops and other businesses at pre-negotiated rates, and then invest into the needed equipment and facilities as we grow.  Project scope of work: ***Key responsibilities will encompass, but is not limited to*** *Developing a strategic and comprehensive “detailed” business  and operating plan *Offer insights, strategic and cost saving ideas on outsourcing needs, sourcing wholesale high quality raw materi...

    €8 / hr (Avg Bid)
    €8 / hr Offre moyenne
    1 offres

    I'm seeking a knowledgeable and experienced freelancer to design and create a PLC ladder diagram using Delta PLC software, specifically the Delta DVP-ES2 model. Key Features: - The diagram will be primarily used for automating a production line, so the freelancer must have a profound understanding of industrial automation processes. - The ladder diagram should be well-structured, easy to understand, and optimally fulfilling the purpose of efficient production line automation. Skills and Experience: - Proficiency with Delta PLC software - Experience with DVP-ES2 model - Strong background in industrial automation - Capable of designing efficient PLC ladder diagrams. By understanding and applying these parameters, you'll play an instrumental role in ...

    €142 (Avg Bid)
    €142 Offre moyenne
    25 offres

    The system must function as a slave module and be connected via RS485 in mdonbus to a master PLC the conductivity values read must be transferred to a PLC via Modbus which will memorize them. The system must have an ESP32 module, an RS485 converter, a display for local visualization of the electrical conductivity and the probe. The conductivity value to be measured ranges from 0 to 20 mS

    €190 (Avg Bid)
    À la une Garanti
    €190
    6 propositions

    Schneider/Rockwell system engineers - ONSITE JOB - INDIAN'S ONLY Scope of job (1) Profibus and modbus communication between different feeders and PLC (2) Implementation & commissioning of control logic in PLC controller (3) SCADA display in all work station, engineering station and servers. Schneider/Rockwell automation engineer needed who has in depth knowledge of PLC programming, Scada and communication protocol Ideal Skills: - Proficient in Schneider/Rockwell systems. - Experienced in industrial automation. - Skilled in system integration. - Able to work under time pressure. If you possess these skills and have a solid understanding of industrial automation, I'd love to hear from you.

    €1282 (Avg Bid)
    €1282 Offre moyenne
    30 offres
    Convert PSD to HTML - TBD 4 jours left
    VERIFIÉ

    We have 15 PSD files to be converted to HTML and make the website We are web designers and we regularly outsource our work The price we can pay is INR 250 per file Bid only if you agree as the price is nonnegotiable

    €18 (Avg Bid)
    €18 Offre moyenne
    57 offres

    I am seeking an experienced PLC programmer to automate specific processes for me. Ideally, you should have deep knowledge in using software to control a wide variety of motor types, as you may be tasked to work on a diverse set of projects. The details are as follows: - Task: You will mainly be responsible for automating certain processes using PLC programming software. Priority will be given to those who hold significant experience in this area. - Motors: While the specific motors or drives were not provided, it's important that you're well-versed in handling a versatile range. - Timelines: The project needs to be completed within a month. Please bear this in mind as you plan your schedule. Candidates with a strong background in automation and solid probl...

    €39 (Avg Bid)
    €39 Offre moyenne
    13 offres
    Fast PSD to HTML Conversion 3 jours left
    VERIFIÉ

    Need 20 PSD to HTML files to be converted the lowest bid will be given work we are web designers we outsource projects so bid reseller price

    €49 (Avg Bid)
    €49 Offre moyenne
    71 offres

    I am looking for a proficient Siemens PLC programmer who has expertise in troubleshooting and repair. Currently, I am facing communication errors in my S7-300 Siemens PLC's existing program. Skills and Experience Needed: - Strong expertise in Siemens S7-300 PLC - Substantial experience in troubleshooting and repairing communication errors - Understanding of PLC programming and its intricacies - Qualified candidate should have a track record of successful Siemens PLC troubleshooting and repair projects. Spanish speaking preferably

    €419 (Avg Bid)
    €419 Offre moyenne
    38 offres

    ...FactoryTalk View ME expert for an HMI/SCADA project. This project involves: - Developing screens from scratch: Your primary responsibility will be to create a brand new interface design for a Scada HMI system on Allen Bradley FactoryTalk View ME software. - Integrating with Allen Bradely 1756-L72 PLC: The interface you create will need to effectively and seamlessly communicate with the Allen Bradely 1756-L72 PLC. Ideal Skills: - Proficient in Allen Bradley FactoryTalk View ME: You should have extensive experience with this software and a proven track record of successfully implementing similar projects. - HMI Design: You should possess strong user interface design skills and be able to create a visually appealing and user-friendly interface from scratch. -...

    €160 (Avg Bid)
    €160 Offre moyenne
    16 offres

    I'm looking for a skilled programmer with experience in using Grafana to visualize data. For this project, you'll be pulling data from a locally connected Allen Bradly Compactlogix PLC and creating web trends on a PC. The key data to be visualized includes: - Temperature - Pressure These will need to be monitored and analyzed on an average basis. In terms of data representation, I prefer a line graph. The ideal candidate will have experience in controlling PLCs, managing data and creating visuals with Grafana. Your insights and expertise on the most effective ways to represent and interpret the data will be highly valued. Strong communication skills and the willingness to ask clarifying questions are appreciated. Please include examples of previous simi...

    €47 / hr (Avg Bid)
    €47 / hr Offre moyenne
    4 offres

    ...This allows us to start-off with minimal manufacturing, concentrating on our immediate production needs, while simultaneously focusing on the development and growth of the business. (2) instead of investing a substantial amount of capital in the beginning on equipment cost, it may be more feasible to contract and outsource whatever work we can to local shops and other businesses at pre-negotiated rates, and then invest into the needed equipment and facilities as we grow.  Project scope of work: ***Key responsibilities will encompass, but is not limited to*** *Developing a strategic and comprehensive “detailed” business  and operating plan *Offer insights, strategic and cost saving ideas on outsourcing needs, sourcing wholesale high quality raw materi...

    €75 (Avg Bid)
    €75 Offre moyenne
    3 offres

    ...for various sectors, including HVAC, water management, and instrumentation. We're currently seeking a highly skilled Automation Engineer with a knack for innovation and efficiency to join our project teams. Role Overview: We're on the hunt for an Automation Engineer with extensive experience in PLC programming, VFDs, HMI design, and system design. The perfect candidate will have demonstrated success in the development and execution of complex automation solutions, especially for HVAC, finishing line systems, and instrumentation. Expertise in Schneider PLCs, AutoCAD Electrical, HMI design, and project management, including BOM preparation, is essential. Key Responsibilities: - Develop and program automation systems using Schneider PLCs, focusing on effici...

    €10 - €17 / hr
    Scellé
    €10 - €17 / hr
    12 offres

    I am trying to learn Next JS , SCSS and Bootstrap . For that I am looking for a developer who can make a landing page, Register, Login and Logout facilities .. Iam looking to outsource react and next js projects too .. It will be long term relationship

    €4 / hr (Avg Bid)
    €4 / hr Offre moyenne
    38 offres

    I'm in need of a skilled PCB designer to create a sensor focused on detecting structural sound, primarily for industrial machinery monitoring. This project does not require integration with any existing systems, thus the sensor should be capable of operating completely independently. Main Project goal. Design of a single PCB which can be glued on a surface, 24VDC supply, 1 output to connect to PLC(short circuit proof), some LED's for status, RS485 connection for configuration/monitoring. use of STM32L071 micro-controller, and other parts preferably from our stock list. Design shall be made in Ki-Cad. No programming required. We have allready selected a structural sound sensor. Key Requirements: - Design expertise: Proficiency in PCB layout, design, and te...

    €591 (Avg Bid)
    €591 Offre moyenne
    18 offres

    I would like to outsource my current digital marketing project and looking for white label digital marketing agency for a long term project. Please apply only if your agency can provide all service, not hiring anyone for single services . Read requirement carefully :- We are currently seeking a proficient digital marketing agency to take charge of my client's digital marketing project. Our client, an esteemed orthopedic surgeon, is keen on enhancing the brand presence of their hospital through strategic content marketing initiatives. The primary objective is to target a 100-mile radius surrounding the hospital location, building brand recognition, awareness, and community engagement. Project Overview: The project goal is completely focu...

    €519 (Avg Bid)
    €519 Offre moyenne
    31 offres

    ...blown light bulb, key not working, leaking toilet. They will advise urgency of the issue, notes of the issue and a photo or couple of photos and a category such as Electrician Required. The system will then send the request to the Caretaker to review. The caretaker can then decide if they will fix the problem themselves or if they will outsource it. If they select Self Manage, it will show in their tasks of things to take care of, if they select to Outsource it, they can select from a drop down of authorised providers and the system will automatically generate a email request to the provider using the details in the database. Once the provide advises Date/Time for the job to be done or that the job has been completed, the Caretaker can then update the system which wil...

    €411 (Avg Bid)
    €411 Offre moyenne
    85 offres

    I need a skilled programmer for a clipping machine PLC/HMI control. I've got either a Siemens S7-1200 with a KTP700 Basic HMI or an Omron CP1l with an NB7Q HMI at my disposal. Key Skills: - Expertise in programming PLCs and HMIs - Familiarity with Siemens S7-1200, KTP700 Basic HMI, Omron CP1l, and NB7Q HMI The project has a high-priority tag attached to it, so I need this done ASAP. Looking forward to receiving informed bids from interested freelancers.

    €464 - €928
    À la une Scellé
    €464 - €928
    36 offres

    I'm in need of an expert in safety PLC programming and robotics, specifically experienced with Yaskawa robots and SICK laser sensors to guide the integration of our system's safety features. Key Tasks: - Program our safety PLC to work seamlessly with our Yaskawa robot. - Implement code that will enable the robot to respond to safety triggers. Safety Triggers: The Yaskawa robot must be programmed to respond to the following safety triggers: - Engagement with physical barriers - Receipt of emergency stop commands Skills and Experience: Ideal candidates should have: - Proficient knowledge in safety PLC, SICK laser sensors and Yaskawa robot programming. - Proven experience in combining PLCs and robotic system for automation processes. - An understanding of saf...

    €307 (Avg Bid)
    €307 Offre moyenne
    13 offres

    ...Responsibilities: - Deliver precise estimations of project requirements including hours and necessary resources/roles. - Develop comprehensive proposals that reflect a deep understanding of the subject matter. Compensation: - Compensation provided for time invested in research and writing, up to 1-2 hours per estimation/proposal, contingent upon the quality of the output. We expect to give you 3-4 such RFPs to respond to each week and expect prompt responses within one business day for each submission. We are specifically looking for individuals with proficiency across a range of domains including but not limited to: - Embedded Systems Programming - Firmware Development - IoT - Robotics - Drone Software - Arduino - Raspberry Pi - Microcontrollers - PLC - CNC - Electroni...

    €2 - €8 / hr
    Scellé
    €2 - €8 / hr
    14 offres

    ...Trainer in Bangalore who is proficient in a range of skills including electrical engineering and automation systems. Extensive knowledge of PLC, SKADA, Pneumatics, Sensors and Transducers is essential to facilitate successful training sessions. Key Responsibilities: - Deliver high-quality training sessions with emphasis on Electrical circuits, Automated systems, Sensors and Transducers, PLC, SKADA, and Pneumatics. - Implement and guide practical exercises to enhance trainee understanding. Ideal Candidate: - Should have an advanced level of expertise in Mechatronics. - A background in electrical engineering and automation systems. - Exceptional command of PLC, SKADA, Pneumatics, Sensors and Transducers. Please note, prior experience in related training will be highly...

    €6 / hr (Avg Bid)
    €6 / hr Offre moyenne
    5 offres

    I'm in need of a PLC programmer proficient in implementing a program to control a stepper motor, particularly for the purpose of shaft rotation / positioning. Key tasks include: - Developing a PLC program and Touch Screen program for effective stepper motor control PLC: Siemens S7 1200, CPU 1214C or s7-200 or OMron CP1L Touch Screen: Siemens KTP700 Basic or Omron NB5Q-TW01B Stepper motor control for drilling and slotting Process explained in the document attached.

    €330 (Avg Bid)
    €330 Offre moyenne
    37 offres
    PLC Siemens S7 - Programming S'est terminé left

    Sinumerik 840d , Siemens S7 Angielski komunikatywny Stawka od 55 euro Start od już najpóźniej 22 kwiecień Standard VW Miejscowość Kassel [Removed by Admin]

    €61 / hr (Avg Bid)
    Local
    €61 / hr Offre moyenne
    1 offres
    Siemens S7-400 PLC Programming S'est terminé left

    I'm in need of a proficient Siemens Step 7 programmer who can accomplish specific tasks on a PLC programming project. Key tasks required: - PLC programming, aimed at enabling the Siemens S7-400 PLC we are currently using for our project. The main objective of this programming task are: - Enable efficient data collection and reporting - Simplify and improve process automation Project is large and already exists need to add data blocks for counters for production totals, like a flow meter but calculation for OEE purposes. The ideal candidate must have demonstrable experience with Siemens Step 7, specifically with S7-400 programmable logic controllers and should have a clear understanding of PLC programming concepts. Experience in da...

    €42 / hr (Avg Bid)
    €42 / hr Offre moyenne
    40 offres
    B2B sales team S'est terminé left

    As an established branding agency, we are in dire need of an experienced B2B sales team to assist us. We are looking to outsource core functions, particularly in the areas of logo design, website design, and social media management. Essential skills: - Strong understanding of the branding industry - Expertise in logo design, website design, and social media management - Proven B2B sales track record - Ability to start working ASAP This role is ideal for a proactive team with acute responsiveness, noted for delivering high-quality outcomes within tight deadlines. Experience in a similar industry will be highly regarded. Let's redefine our branding together!

    €8 / hr (Avg Bid)
    €8 / hr Offre moyenne
    25 offres

    ...expert in C# project integration. My goal is to seamlessly merge three existing C# projects into one cohesive project while maintaining all pre-existing functions. Details: The functions of the 3 projects are almost the same. The data is read from the plc and then uploaded to the mes system. The difference lies in the number of data read and the difference in uploading to the mes interface. These items contain Chinese characters. Please add Chinese character support to your operating system to avoid losing information. Since all three C# projects were constructed using the same version of C# and compatible frameworks, I need a specialist who can ensure smooth integration without compromising any functionalities. Ideal Skills and Experience: - Expertise in C# -...

    €136 (Avg Bid)
    €136 Offre moyenne
    78 offres
    Oxygen Builder Websites S'est terminé left

    I am a freelance marketer. I am looking for someone that I can outsource my web design projects to. I want the websites built with Oxygen Builder. I need someone who is experienced in building websites with Oxygen Builder. I have a client who needs a new website. Hoping to find a web designer that I can work with long term.

    €15 / hr (Avg Bid)
    €15 / hr Offre moyenne
    93 offres
    Develop a Siemens PLC Program S'est terminé left

    We need a Siemens S7-1200 Program written for a small test chamber used to inject a powder into an air stream that flows through a 1 cubic meter environmental test chamber and then comes to a stop of air flow and allow the injected power to settle on small test sensors hanging in the main chamber. I would want a few safety check...discrete output for fan drive contactor relay, future AO for VFD of input fan, injection solenoid for powder injection, future air flow measurement, output for green light, red light and yellow light condition. You must be familiar and comfortable with Siemens TIA portal version 18 used to develop the program! This is not a "learn as you" go project. See the attached photo of my actual build. I have the start of the file with the hardware config...

    €931 (Avg Bid)
    €931 Offre moyenne
    40 offres

    In the Hitachi brochure I found that the micro series has the web-based display function, but I can't get it to work. In the example we need to check the output screws via the web and read the status of the digital inputs. I need the PLC input and output status project to be made.

    €168 (Avg Bid)
    €168 Offre moyenne
    20 offres

    I'm looking for an experienced web developer to help me with some content updates and functionality enhancements on a sailing club website. The club operates as a small UK PLC and has c800 members. Content Updates: - Review and revise existing text across the site. - Add new pages to accommodate growing needs. - Carry out a refresh of images and videos. - Write a monthly update describing new changes/updates to the site. Functionality Improvement: - Implement integration with popular social media platforms to broaden reach and improve user engagement. Email updates to members with details of activities and work undertaken. Collating updates from various employees and members to [produce a monthly email to all members. Review and revise content on existing social media p...

    €23 / hr (Avg Bid)
    €23 / hr Offre moyenne
    161 offres

    This is job is only available for the of Bangladesh.. We are seeking a talented freelance web designer/developer to create a custom template for our existing website, While we admire the design and layout of , we are looking for a unique template that aligns with our brand identity and specific requirements. We need ...While we admire the design and layout of , we are looking for a unique template that aligns with our brand identity and specific requirements. We need Following templates to be design in our site: Home Engagement Models Solutions Expertise Technology Expertise All Technologies All Software Developers Developer Skill Recruitment Clients About Contact Outsourcing Handbook Why Outsource Why Nearshore Insights

    €314 (Avg Bid)
    €314 Offre moyenne
    55 offres

    ...expert in C# project integration. My goal is to seamlessly merge three existing C# projects into one cohesive project while maintaining all pre-existing functions. Details: The functions of the 3 projects are almost the same. The data is read from the plc and then uploaded to the mes system. The difference lies in the number of data read and the difference in uploading to the mes interface. These items contain Chinese characters. Please add Chinese character support to your operating system to avoid losing information. Since all three C# projects were constructed using the same version of C# and compatible frameworks, I need a specialist who can ensure smooth integration without compromising any functionalities. Ideal Skills and Experience: - Expertise in C# -...

    €37 (Avg Bid)
    €37 Offre moyenne
    40 offres

    This is job is only available for the of Bangladesh.. We are seeking a talented freelance web designer/developer to create a custom template for our existing website, While we admire the design and layout of , we are looking for a unique template that aligns with our brand identity and specific requirements. We need ...While we admire the design and layout of , we are looking for a unique template that aligns with our brand identity and specific requirements. We need Following templates to be design in our site: Home Engagement Models Solutions Expertise Technology Expertise All Technologies All Software Developers Developer Skill Recruitment Clients About Contact Outsourcing Handbook Why Outsource Why Nearshore Insights

    €311 (Avg Bid)
    €311 Offre moyenne
    98 offres

    ...This should incorporate insights into the company’s business and financial models, including strengths and weaknesses, together with opportunities and recommendations for future improvement. (suggested word count: 750 words) 2. Qualitative and quantitative assessment and evaluation of the IT/IS proposal. (suggested word count: 375 words) 3. A forecast valuation range for the equity of Viniculture PLC using a free cashflow model (based on the 2016 forecast prepared by our finance team and the external consensus view of analysts for 2016). Justify and explain any assumptions made, interpret the results and consider possible implications for the business and its equity shareholders. (suggested word count: 375 words) Ideal skills and experience: - A deep understanding of cas...

    €48 (Avg Bid)
    €48 Offre moyenne
    26 offres

    Hi, I'm looking to outsource my current content creation process, and was wondering if you are able to complete the following work each fortnight? If you're able to do this, for each item I will be making a short Loom video to explain for that task is to be completed. - Post an article I've written on my Wordpress website. Article and thumbnail image provided. Expected time: 10 mins. - Schedule the article to my LinkedIn profile (as an article). Article and header image provided. - Expected time: 5 mins. - Edit podcast. Audio will be provided, I just need you to add the intro and outro audio (also provided), export it, run it through to filter the audio, then download the resulting audio file. Expected time: 20 minutes. - Publish podcast: Schedule podcast in ht...

    €82 (Avg Bid)
    €82 Offre moyenne
    44 offres
    Click PLC Programmer S'est terminé left

    ...a simple project which i need put into ladder logic for a Click PLC to control 3 5/2 pneumatic cylinders from four input buttons. Logic: Button A pushed: Cylinder 1 Closed and Cylinder 3 Open (Cylinder 2 can stay in whatever position it is in) Button B pushed: Cylinder 1 Open, Cylinder 2 Open, Cylinder 3 Open Button C pushed: Cylinder 1 Open, Cylinder 2 Closed, Cylinder 3 Open Button D pushed: Cylinder 1 Open, Cylinder 3 Closed (Cylinder 2 can stay in whatever position it is in) When a button is pushed, the cylinders should move to the correct position and then remain there even when the button is released. The cylinders should only move again when another button is pushed. I would prefer to use cylinders without positional input and need a recommendation on which C...

    €86 (Avg Bid)
    €86 Offre moyenne
    1 offres

    ...We have demand for multiple locations in US and Canada. Qualification criteria: 1. A business with the REAL possibility to be our client: NOT pushing appointments, NOT people just looking to compare prices. They need to provide a reason on the call why they want the appointment, for example: "I'm not satisfied with my current company." "I'm doing the cleaning in-house, but I would like to outsource." "We are moving offices or returning from home office to the office." 2. Confirm in the call: -If the person is the Decision Maker or part of the decision -making process. -Size of the building. -Amount of weekly/monthly visits (Always ask weekly). 3. Small business confirmation: For small businesses with less than 6,000 sq ft monthly to...

    €87 (Avg Bid)
    €87 Offre moyenne
    7 offres

    hey there! we are offering services like graphic designing and video editing for social media platforms like youtube, instagram, facebook..etc not only these we are also offering our service to growing business. Till now, I have been marketiing for ourselves but now we are looking forward to outsource it to freelance marketer/ marketing agency so that we can focus more on working. Responsibilities: -Develop and execute digital marketing strategies to increase brand awareness and drive sales -Generate leads through targeted advertising campaigns -email marketing -Analyze marketing data and adjust strategies accordingly to achieve goals. What We Need: -Digital marketing experience, with a proven track record of success. -Strong communication and creative skills -Ability to think...

    €1809 (Avg Bid)
    €1809 Offre moyenne
    17 offres

    I'm looking for an experienced programmer specifically skilled in Mitsubishi PLC and GX Works3 to help with a programming task. - Task: You will be programming a Mitsubishi PLC used in an industrial automation application. - Software: Proficiency in GX Works3 is a must, as this is the software that we are currently using. - Experience: The ideal candidate will have previous experience in programming Mitsubishi PLCs, especially within an industrial automation context. Your responsibility will be to ensure that the PLC functions appropriately within the larger automation system in a seamless and efficient manner.

    €183 (Avg Bid)
    €183 Offre moyenne
    18 offres

    ...login'. This task is an initial step towards a regular monthly assignment focused on supplier sourcing. Initially, my goal is to identify 1-2 very good distributors to kickstart the process. I would ask you to research 24 hours in 3 milestones, and each 2 days send me an excell with an update of about 8 hours of work. It could be that I add a column to the excell if needed as this is my first outsource of this task. Core Products: Pergolas, pavilions, patios Complementary Products: Outdoor furniture (tables, bar stools, lounge chairs) Porch swings (polywood swings) Patio lights, rocking chairs, daybeds For Year-Round Sales: Patio heaters, fire pits, outdoor fireplaces Finding Distributors: -Direct Website Research: Explore and locate distributors online. -Trade Shows &am...

    €150 (Avg Bid)
    €150 Offre moyenne
    11 offres
    WordPress Template Creation S'est terminé left

    We are seeking a talented freelance web designer/developer to create a custom template for our existing website, While we admire the design and layout of , we are looking for a unique template that aligns with our brand identity and specific requirements. We need Following templates to be design in our site: Home Eng...While we admire the design and layout of , we are looking for a unique template that aligns with our brand identity and specific requirements. We need Following templates to be design in our site: Home Engagement Models Solutions Expertise Technology Expertise All Technologies All Software Developers Developer Skill Recruitment Clients About Contact Outsourcing Handbook Why Outsource Why Nearshore Insights

    €321 (Avg Bid)
    €321 Offre moyenne
    103 offres

    ...programming, particularly in PLC. The ideal candidate must have extensive experience and expertise with Siemens-brand PLCs. Nonetheless, the specific Siemens PLC series to be used in the project hasn't been finalized yet. Therefore, freelancers familiar with several series will have an advantage. Key Requirements: - Proven experience with PLC (Programmable Logic Controller) programming - Proficient with Siemens PLC systems - Ability to recommend and choose the appropriate Siemens series for specific automation tasks - Ability to promptly troubleshoot and resolve any issues that might arise Need to build and program RPM testing machine and strength testing machine. ( For grinding wheel rotation strength check. Your relevant project or wor...

    €630 (Avg Bid)
    €630 Offre moyenne
    23 offres