Ip68 enclosure designemplois

Filtrer

Mes recherches récentes
Filtrer par :
Budget
à
à
à
Type
Compétences
Langues
    État du travail
    2,162 ip68 enclosure design travaux trouvés au tarif de EUR
    Trophy icon Tiger compositing into jungle 4 jours left

    I have a video of a tiger walking through an enclosure in slow motion. I would like the background replaced with a jungle setting so that it looks like the tiger is walking through the jungle. I want it to look 100% real. Thank you.

    €18 (Avg Bid)
    €18
    10 propositions
    Prototype into Manufacturing 4 jours left
    VERIFIÉ

    Functioning prototype exists. I require the following: 1- Device components that I will ask you to use (same as the prototype) must be designed by you to allow a factory to assemble the same for each device (no customized circuit or PCB required in order to optimize costs). Design must be optimized for mass production: design must dictate how the outsourced components will be connected together, ...

    €29 / hr (Avg Bid)
    €29 / hr Offre moyenne
    35 offres
    Design a Walkie Talkie 3 jours left
    VERIFIÉ

    Hello freelancers, We are looking for a professional who can design a Walkie Talkie from scratch We would prefer a person who already worked for other manufacturers and designed for them. The complete design is needed in all respect, Main Unit, Chassis, Battery & Charger (Dual Slot Charger). Please note, this is not a toy walkie talkie it is to be built for professional use P...

    €2021 (Avg Bid)
    €2021 Offre moyenne
    13 offres
    Persuasive letter 2 jours left

    Write forms of persuasive writing in a socio-political writing situation • Analyze and critique visual images • Write clear and comprehensible sentences • Navigate the professional letter writing process Write your letter based on a critical or creative analysis of an image Write your letter in professional business letter formatting taught in the lessons, utilizing a minimum of 350...

    €18 (Avg Bid)
    €18 Offre moyenne
    18 offres
    dac enclosure S'est terminé left

    I need some one to make a pub enclosure I need design files I already copyrighted the design but I need schematics to print the enclosure. $20 firm

    €18 (Avg Bid)
    €18 Offre moyenne
    11 offres
    WeSail.Green instruction 2 S'est terminé left

    Re-design and optimizing our leaflet as per enclosure …

    €84 (Avg Bid)
    €84 Offre moyenne
    11 offres

    I need an enclosure that I can 3d print that Looks similar to a rifle scope. square or round. Is two pieces. When closed around the neck of the camera the camera does not move. The yocto board can be mounted to the top half of the enclosure inside of it. 2 holes in the back for the two USB C cables to stick out of. the bottom piece will slide on to a picatinny rail.

    €125 (Avg Bid)
    €125 Offre moyenne
    30 offres

    Good morning, we need a mechanical engineer tha thas long experience in designing parts for injection moulding. We will need to design a semi transparent display for a home appliance. The shape is already definied and it will be provided, we just need an expert in plastic part design to engineer it for manufacturing and to make sure that the LED illuminated writings are properly defined and with ...

    €14 / hr (Avg Bid)
    €14 / hr Offre moyenne
    38 offres

    In this project, I need you to help me designing 3D electronic enclosure. The dimensions is approximately 100x100x90 mm (length x width x height). I need the original file, accurate design (3D), (.obj file) and the documentation of your work. If you think you are able to conduct it, please let me know, and send me your portfolio (if any). The software you may use: FreeCAD: [se connecter pour voir ...

    €26 (Avg Bid)
    €26 Offre moyenne
    20 offres
    3d enclosure S'est terminé left

    Small electronics enclosure for a wearable device. Industrial design and engineering design for 3D printing.

    €26 / hr (Avg Bid)
    €26 / hr Offre moyenne
    56 offres

    To design an enclosure for a solar system

    €311 (Avg Bid)
    €311 Offre moyenne
    43 offres
    Basic enclosure design S'est terminé left

    I'm looking for mechanical engineer for my upcoming projects. I have a small task to look at the skills of the engineer. I need two sample model to be designed in Solidworks. I will be sharing details of pcb for which I need the engineer to design enclosure concept, I will also share the two concepts for reference, I just need it to be converted it to model. There's no restriction on the...

    €14 (Avg Bid)
    €14 Offre moyenne
    8 offres

    This is about creating a 3d diagram with dimensions and measurements, screws places, openings, etc. for a wall-mounting plate for a satellite receiver box. The STB is 20cm X 13 and it's features here: [se connecter pour voir l'URL] when mounted, the LED should be facing UP and the cable ports should be facing down. the diagram must be carpenter-ready with dimensions and multiple 3-d loo...

    €26 (Avg Bid)
    Garanti
    €26
    19 propositions
    RF (UWB) PCB Design needed S'est terminé left

    We currently have a designed and tested anchor PCB for an RTLS system. This design uses two DWM1001C Modules, one for anchor mode (get a reference for fixed position) and a bridge mode (getting data from mobile devices) and we are having poor range with both modules compared to the development boards. The job main activities include: 1.- Choosing proper enclosure (IP67) for this RF design. 2.- Ch...

    €432 (Avg Bid)
    €432 Offre moyenne
    27 offres

    Require experienced OBD 2 enclosure designer for an original production ready design to include engineer drawings . Please forward samples

    €764 (Avg Bid)
    €764 Offre moyenne
    30 offres
    Enclosure Design and Prototype S'est terminé left

    We're launching a new product that will allow guests to our customers to connect to the wireless network securely. We want to develop our own mini-kiosk stand that displays a QR code. The hardware solution will be based on Raspberry Pi and 7.5 inch ePaper display ([se connecter pour voir l'URL]). We need someone who can design an enclosure for the hardware and produce the prototype. We w...

    €1255 (Avg Bid)
    €1255 Offre moyenne
    31 offres
    Custom ML Camera S'est terminé left

    I'm looking for consultancy service and support to choose the best component for a business specific camera design, samples and production, including but not limited to: - Choosing the best mandatory features and components (ex: Image Sensor, IR, Filters, focal length, connectivity, power...) - Compatibility with Android 9 support - Finding best sources for both samples and mass production (i...

    €13 / hr (Avg Bid)
    €13 / hr Offre moyenne
    7 offres
    Trophy icon Fun Logo for Taco Company S'est terminé left

    We would like to develop a logo for a taco company. About the Brand The name of the company is "Eat Meh Tacos" The name says everything about the personality. The "Meh" in "Eat Meh Tacos" is a Caribbean term. The brand, at its core is about simple, delicious food that enables people to have fun and relax. Five words to describe the brand: consistent, approachable, ...

    €299 (Avg Bid)
    Garanti Scellé
    €299
    737 propositions

    We need someone to do the 3D-design and drawing for a 2-piece-housing for an electric actuator for a motor ball valve. Special requirements: - We already have motor ball valves, therefore the connection to the ball valve needs to be compatible to the existig ones - the housing needs to be as small as possible under consideration of all internal parts incl. motor, battery and electronics (STEP-file...

    €472 (Avg Bid)
    €472 Offre moyenne
    61 offres
    i need webdesigner for my website S'est terminé left

    hello, I need a skilled webdesigner for my blogg and Confident communicator – both in professional writing to work directly in client-facing project teams & to speak about your design reasoning. You need to check the requirements see enclosure

    €481 (Avg Bid)
    €481 Offre moyenne
    35 offres

    Create ergonomic enclosure parts of robotic hand reflecting its movements. -outcome and its files has to be easily used for CAD design -create renders on the way while creating 3D model

    €120 (Avg Bid)
    €120 Offre moyenne
    19 offres

    We have purchased the source code of an event management platform (PHP). ** We paid and obtained the license** The source code includes software routines to check the URL the system uses and feedbacks to the author, which become a potential risk after we deployed the platform, as it may stop running beyond our control. In addition, we like to add extra features. We are looking for a qualified, de...

    €3967 (Avg Bid)
    €3967 Offre moyenne
    69 offres

    I made a new device and I want to build the enclosure using solidworks. See the attached 3D file and images of the product which I want to make, and pls feel free to contact me.

    €93 (Avg Bid)
    €93 Offre moyenne
    61 offres
    We want a webdev for our website S'est terminé left

    Hello, We need an expert with: Experience with transforming large dataset is a plus. Experience in automated UI tests is a plus Experience in webdesign PLEASE CHECK OUR DETAILS SEE ENCLOSURE IT'S IMPORTANT FOR US

    €5 / hr (Avg Bid)
    €5 / hr Offre moyenne
    9 offres
    Sheet Metal Enclosure project S'est terminé left

    Design Mountings for Sheet metal Enclosure. (Fusion 360 preferred) Please share your complicated sheet metal projects worked on before. Lead time: 1 Day. No negotiations on Budget. Don't waste my time and yours.

    €11 (Avg Bid)
    €11 Offre moyenne
    17 offres

    In an analytical report, compare and contrast the roof system of Southern Stand, Melbourne Cricket Ground, Jolimont in Victoria by Daryl Jackson Architects vs National Stadiumin Brasillia, Brazil by GMP Architects and Schlaich Bergmann and partner. The report is to be a4 sized , 1500 word long (+/-10%) in addition to images and references. In an analytical report, compare and contrast the structu...

    €84 (Avg Bid)
    €84 Offre moyenne
    12 offres

    In an analytical report, compare and contrast the roof system of Southern Stand, Melbourne Cricket Ground, Jolimont in Victoria by Daryl Jackson Architects vs National Stadiumin Brasillia, Brazil by GMP Architects and Schlaich Bergmann and partner. The report is to be a4 sized , 1500 word long (+/-10%) in addition to images and references. In an analytical report, compare and contrast the structu...

    €40 (Avg Bid)
    €40 Offre moyenne
    31 offres

    I have a photoshop file I want developer to update it by correct dimension for matching the enclosure dimension

    €15 / hr (Avg Bid)
    €15 / hr Offre moyenne
    37 offres

    I have a photoshop file I want developer to update it by correct dimension for matching the enclosure dimension

    €18 (Avg Bid)
    €18 Offre moyenne
    37 offres
    Architectural Analytical Report S'est terminé left

    In an analytical report, compare and contrast the roof system of Southern Stand, Melbourne Cricket Ground, Jolimont in Victoria by Daryl Jackson Architects vs National Stadiumin Brasillia, Brazil by GMP Architects and Schlaich Bergmann and partner. The report is to be a4 sized , 1500 word long (+/-10%) in addition to images and references. In an analytical report, compare and contrast the structu...

    €9 (Avg Bid)
    €9 Offre moyenne
    15 offres

    We have 3D step files of PCB boards to be attached in the wristband watch enclosure. You will be able to design the enclosure to be fit the PCB boards in. We will provide the 3D files of PCB boards to the right candidate. Will proceed with hiring today. The candidate should assist us to manufacture the wristband enclosure.

    €128 (Avg Bid)
    €128 Offre moyenne
    1 offres

    We have 3D step files of PCB boards to be attached in the wristband watch enclosure. You will be able to design the enclosure to be fit the PCB boards in. We will provide the 3D files of PCB boards to the right candidate. Will proceed with hiring today. The candidate should assist us to manufacture the wristband enclosure.

    €5082 (Avg Bid)
    €5082 Offre moyenne
    43 offres
    Sunroom enclosure S'est terminé left

    Under my existing deck, I have open space which I would like to add windows, doors and enclose, some plumbing is required and a small function kitchen area (against existing wall, plumbing is required)

    €353 (Avg Bid)
    €353 Offre moyenne
    26 offres
    Plastic Enclosure Design S'est terminé left

    We would like to design plastic enclosure for our various PCBs. We need a person who can help us in designing and also getting the manufacturing done with the highest quality and precision

    €86 (Avg Bid)
    €86 Offre moyenne
    27 offres
    i want to hire a logo designer S'est terminé left

    I need a logo designed. logo to be designed for fenestration industry. firm name - Silver Shade product- premium aluminium and uPVC door and windows , ss and aluminium Raillings, premium shower enclosure

    €15 (Avg Bid)
    €15 Offre moyenne
    29 offres
    Trophy icon Write SEO Optimized content for all pages S'est terminé left

    I have a website designed already. I want someone to rewrite SEO optimized content. I need someone who has a good idea about 1)3D Printing processes like FDM, SLA, SLS... 2)3D Modelling (Important: Apart from 3D Modelling, I need a separate page for PCB Enclosure Design) 3)Vaccum Casting. You can research competitors websites, but should not copy them. Website: [se connecter pour voir l'...

    €5 (Avg Bid)
    Garanti
    €5
    5 propositions
    MVP Enclosure Design S'est terminé left

    I would like an enclosure concept completed by a designer who has experience with fastening and joining 3d printed parts. The production volume is low (estimating around 20 units) and these will be using for testing and protecting the hardware inside. Therefore the design does not need to be production quality but should look nice.

    €340 (Avg Bid)
    €340 Offre moyenne
    49 offres

    Hi, I am in need of some electrical drafting and minor electrical design support. The design, included in the pdf below, needs to be made into an actual electrical drawing. The deliverable should be the file in its native design program (ex. autocad electrical) and a copy as a .pdf. Please provide examples of previous work (pdf is fine) as an example of what I can expect. Additionally, I wou...

    €347 (Avg Bid)
    €347 Offre moyenne
    48 offres
    PCB Layout Design S'est terminé left

    Board is 150mm by 120mm to fit a 9U Din rail mounted enclosure. Components consist of a Teensy 4.1 module, a relay driver IC, 8 miniature relays, 9 FETs, 42 resistors, 16 zener diodes, 5 capacitors, a voltage regulator, 64 screw terminal connectors and a magjack. 2 layer PCB with double sided solder mask, single sided screen print, all conventional components.

    €195 (Avg Bid)
    €195 Offre moyenne
    8 offres

    Need freelancer who have innovative ideas and has experience in designing plastic molds. We are designing cellphone chargers ranging from 10W to 100 W. Enclosures should have press fit mechanism. Material for molding will be ABS. Please provide drawings or photographs of the previous work completed.

    €119 (Avg Bid)
    €119 Offre moyenne
    15 offres
    Ft Worth Medical Center S'est terminé left

    Need a CONNECTION DESIGN SPECIALTY ENGINNER Licensed in Texas. This will for the Federal Medical Center secure detention enclosure.

    €875 (Avg Bid)
    €875 Offre moyenne
    7 offres

    i like someone or organization to design an enclosure for my ID card PCB board, the plastic enclosure should be suitable for my PCB PCB - ECAD-MCAD should fit exactly and simulation needs to be run Dustproof enclosure ready to make mould suggestion on Ecad and Mcad is welcome to prune the design and make our device as slim as possible

    €295 (Avg Bid)
    €295 Offre moyenne
    10 offres
    New Handheld device S'est terminé left

    Looking to have some PCB development completed around the ESP32-WROOM module. An existing design was completed but has issues and the designer is no longer available. The existing design files will be made available (easyEDA) but happy for a winner to start again as the overall requirements are pretty simple. Device will have the following requirements - Developed around ESP32-WROOM - Powered by...

    €203 (Avg Bid)
    €203 Offre moyenne
    13 offres
    Trophy icon Design self-ordering kiosk frame and welcome page S'est terminé left

    Please see attached examples of what we mean by kiosk bezel (this is the branded kiosk enclosure) and welcome screen. 1. Design self-ordering kiosk frame: -The frame is for [se connecter pour voir l'URL] so please follow their branding. -Attached is the bezel size (12.9" iPad) and design. Please design the outer bezel. 2. Design self-ordering kiosk software welcome page: The welcome p...

    €85 (Avg Bid)
    €85
    50 propositions
    Break Fix - WO-014596058 S'est terminé left

    - Case ID - 5069179568 - WO Description - ALERT:EF ONS/EMT/Snap2/Snap1/ENUR/IN/2N1K7PA/*Hardware Issue/Gap between Back Panel and Base Enclosure - Product Description - 2N1K7PA-5CD125BMJ1-HP Pavilion Laptop 15-eg0104TX - Asset Serial - 5CD125BMJ1 - Company Name - ROOPESH KUMAR SAHOO - Customer Name - ROOPESH KUMAR SAHOO - Customer Address - Bangalore 560066 - Part Description - - Part Number -...

    €7 (Avg Bid)
    Local
    €7 Offre moyenne
    1 offres
    CAD Design for Metal Enclosure S'est terminé left

    Need experienced designer to produce 3D CAD drawings from specs provided. Design is for electronic enclosure. Knowledge in Engineering & working with metals helpful. Specs provider to selected freelancer only.

    €103 (Avg Bid)
    €103 Offre moyenne
    63 offres
    UVSee enclosure S'est terminé left

    Hi Jay, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    €990 (Avg Bid)
    LDN
    €990 Offre moyenne
    1 offres
    Thermal Analysis / CFD S'est terminé left

    I need Thermal Analysis / CFD to be done for the computing platform with an RF circuit. Board details are as follows: Components: double sided Dimension: 180 mm X 25 mm Enclosure: aluminum Design files: Solidworks Please reply, answering all the following questions: Price: make a bid Duration: how long will it take you to do the job Requirements: what do you need to have to complete the job Tool:...

    €289 (Avg Bid)
    €289 Offre moyenne
    31 offres
    I need a 3D cad disigner S'est terminé left

    Design of a two part enclosure to cove an existing tablet hole. it would work like a screw less switch plate see attached exemple

    €127 (Avg Bid)
    €127 Offre moyenne
    84 offres

    A commercial building we have large waste bins in the parking lot, since it is highly visible to all visiotrs we want to design and build an attractive looking enclosure to hide the waste bins. Size of enclosure approx 5 x 5 meters. Without roof. Only conisists of 180 cm high walls (metal or aluminum or other materials) and gates for access. Requirements are 3d rendering, autocad drawings incl. e...

    €332 (Avg Bid)
    €332 Offre moyenne
    35 offres